zephyr/drivers/modem/Kconfig.gsm

73 lines
1.8 KiB
Plaintext

# Copyright (c) 2020 Intel Corporation
# SPDX-License-Identifier: Apache-2.0
config MODEM_GSM_PPP
bool "Support GSM modems"
select MODEM_CONTEXT
select MODEM_CMD_HANDLER
select MODEM_IFACE_UART
help
Enable GSM modems that support standard AT commands and PPP.
if MODEM_GSM_PPP
choice
prompt "Modem type"
default MODEM_GSM_GENERIC
help
Type/manufacturer of the GSM modem
config MODEM_GSM_GENERIC
bool "Generic GSM modem"
help
The modem does not need any special handling etc.
config MODEM_GSM_SIMCOM
bool "SIMCOM modem"
help
Use this if you have SIMCOM based modem like SIM800 etc.
endchoice
config MODEM_GSM_UART_NAME
string "UART device name the modem is connected to"
config MODEM_GSM_RX_STACK_SIZE
int "Size of the stack allocated for receiving data from modem"
default 512
help
Sets the stack size which will be used by the GSM RX thread.
config MODEM_GSM_INIT_PRIORITY
int "Init priority for the GSM modem driver"
default 42
range 0 99
help
The GSM modem is initialized in POST_KERNEL using priority in
the range 0-99.
config MODEM_GSM_APN
string "Access Point Name"
default "internet"
help
Specify Access Point Name, i.e. the name to identify Internet IP
GPRS cellular data context.
config MODEM_GSM_MANUAL_MCCMNO
string "MCC/MNO for establishing network connection"
help
This setting is used in the AT+COPS command to set the MCC/MNO
for the network connection context. This value is specific to
the network provider and may need to be changed if auto is not
selected.
config MODEM_GSM_FACTORY_RESET_AT_BOOT
bool "Factory reset modem at boot"
help
If this is enabled, the modem will be reset to factory default
settings first thing in the initialization sequence. This is
helpful if your modem has a tendency to get stuck due to cached
state.
endif