mbedTLS DTLS client
####################
Overview
********
This sample code shows a simple DTLS client using mbed TLS on top of Zephyr
Building and running
********************
Follow the steps for testing :ref:`networking with Qemu <networking_with_qemu>`.
Obtain the mbed TLS code from:
https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
and put it in a well known directory on your Linux machine, this will be your
server.
change to that directory and compile the mbedTLS on your host machine:
.. code-block:: console
$ tar -xvzf mbedtls-2.3.0-apache.tgz
$ cd mbedtls-2.3.0
$ CFLAGS="-I$PWD/configs -DMBEDTLS_CONFIG_FILE='<config-thread.h>'" make
Assign the server IP address and start the DTLS server.
.. code-block:: console
$ sudo ip addr add 192.0.2.2/24 dev tap0
$ ./programs/ssl/ssl_server2 dtls=1 ecjpake_pw=passwd
.. code-block:: console
. Seeding the random number generator... ok
. Bind on udp://*:4433/ ... ok
. Setting up the SSL/TLS structure... ok
. Waiting for a remote connection ...
To stop the server use Ctrl-C and repeat steps described in f) every time
QEMU gets terminated, due the Netwrok interface (tap) being restarted.
From the application directory type
.. code-block:: console
$ make run
This will result in Qemu running with the following output:
.. code-block:: console
. Seeding the random number generator... ok
. Setting up the DTLS structure... ok
. Connecting to udp 192.0.2.2:4433... ok
. Setting up ecjpake password ... ok
. Performing the SSL/TLS handshake... ok
> Write to server: ok
. Closing the connection... done
On the server side you should see this
.. code-block:: console
. Performing the SSL/TLS handshake... hello verification requested
. Waiting for a remote connection ... ok
. Performing the SSL/TLS handshake... ok
[ Protocol is DTLSv1.2 ]
[ Ciphersuite is TLS-ECJPAKE-WITH-AES-128-CCM-8 ]
[ Record expansion is 29 ]
[ Maximum fragment length is 16384 ]
< Read from client: 18 bytes read
GET / HTTP/1.0
> Write to client: 143 bytes written in 1 fragments
HTTP/1.0 200 OK
Content-Type: text/html
<h2>mbed TLS Test Server</h2>
<p>Successful connection using: TLS-ECJPAKE-WITH-AES-128-CCM-8</p>
. Closing the connection... done
. Waiting for a remote connection ... ok
. Performing the SSL/TLS handshake... failed
! mbedtls_ssl_handshake returned -0x7900
. Waiting for a remote connection ...
Disregard the last handshake failed message, due the closing connection.
If the server does not receive the messages, use a network traffic analyzer,
like Wireshark.
Reset the board.
References
**********
- https://tls.mbed.org/
0f18ce44f9