380 lines
10 KiB
C
380 lines
10 KiB
C
/*
|
|
* Copyright (c) 2016 BayLibre, SAS
|
|
* Copyright (c) 2017 Linaro Ltd
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <drivers/clock_control/stm32_clock_control.h>
|
|
#include <drivers/clock_control.h>
|
|
#include <sys/util.h>
|
|
#include <kernel.h>
|
|
#include <soc.h>
|
|
#include <stm32_ll_i2c.h>
|
|
#include <stm32_ll_rcc.h>
|
|
#include <errno.h>
|
|
#include <drivers/i2c.h>
|
|
#include <drivers/pinmux.h>
|
|
#include <pinmux/pinmux_stm32.h>
|
|
#include "i2c_ll_stm32.h"
|
|
|
|
#define LOG_LEVEL CONFIG_I2C_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(i2c_ll_stm32);
|
|
|
|
#include "i2c-priv.h"
|
|
|
|
int i2c_stm32_runtime_configure(const struct device *dev, uint32_t config)
|
|
{
|
|
const struct i2c_stm32_config *cfg = DEV_CFG(dev);
|
|
struct i2c_stm32_data *data = DEV_DATA(dev);
|
|
I2C_TypeDef *i2c = cfg->i2c;
|
|
uint32_t clock = 0U;
|
|
int ret;
|
|
|
|
#if defined(CONFIG_SOC_SERIES_STM32F3X) || defined(CONFIG_SOC_SERIES_STM32F0X)
|
|
LL_RCC_ClocksTypeDef rcc_clocks;
|
|
|
|
/*
|
|
* STM32F0/3 I2C's independent clock source supports only
|
|
* HSI and SYSCLK, not APB1. We force clock variable to
|
|
* SYSCLK frequency.
|
|
*/
|
|
LL_RCC_GetSystemClocksFreq(&rcc_clocks);
|
|
clock = rcc_clocks.SYSCLK_Frequency;
|
|
#else
|
|
if (clock_control_get_rate(DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE),
|
|
(clock_control_subsys_t *) &cfg->pclken, &clock) < 0) {
|
|
LOG_ERR("Failed call clock_control_get_rate");
|
|
return -EIO;
|
|
}
|
|
|
|
#endif /* CONFIG_SOC_SERIES_STM32F3X) || CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
data->dev_config = config;
|
|
|
|
k_sem_take(&data->bus_mutex, K_FOREVER);
|
|
LL_I2C_Disable(i2c);
|
|
LL_I2C_SetMode(i2c, LL_I2C_MODE_I2C);
|
|
ret = stm32_i2c_configure_timing(dev, clock);
|
|
k_sem_give(&data->bus_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define OPERATION(msg) (((struct i2c_msg *) msg)->flags & I2C_MSG_RW_MASK)
|
|
|
|
static int i2c_stm32_transfer(const struct device *dev, struct i2c_msg *msg,
|
|
uint8_t num_msgs, uint16_t slave)
|
|
{
|
|
struct i2c_stm32_data *data = DEV_DATA(dev);
|
|
struct i2c_msg *current, *next;
|
|
int ret = 0;
|
|
|
|
/* Check for validity of all messages, to prevent having to abort
|
|
* in the middle of a transfer
|
|
*/
|
|
current = msg;
|
|
|
|
/*
|
|
* Set I2C_MSG_RESTART flag on first message in order to send start
|
|
* condition
|
|
*/
|
|
current->flags |= I2C_MSG_RESTART;
|
|
|
|
for (uint8_t i = 1; i <= num_msgs; i++) {
|
|
|
|
if (i < num_msgs) {
|
|
next = current + 1;
|
|
|
|
/*
|
|
* Restart condition between messages
|
|
* of different directions is required
|
|
*/
|
|
if (OPERATION(current) != OPERATION(next)) {
|
|
if (!(next->flags & I2C_MSG_RESTART)) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Stop condition is only allowed on last message */
|
|
if (current->flags & I2C_MSG_STOP) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
} else {
|
|
/* Stop condition is required for the last message */
|
|
current->flags |= I2C_MSG_STOP;
|
|
}
|
|
|
|
current++;
|
|
}
|
|
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
/* Send out messages */
|
|
k_sem_take(&data->bus_mutex, K_FOREVER);
|
|
|
|
current = msg;
|
|
|
|
while (num_msgs > 0) {
|
|
uint8_t *next_msg_flags = NULL;
|
|
|
|
if (num_msgs > 1) {
|
|
next = current + 1;
|
|
next_msg_flags = &(next->flags);
|
|
}
|
|
do {
|
|
uint32_t temp_len = current->len;
|
|
uint8_t tmp_msg_flags = current->flags & ~I2C_MSG_RESTART;
|
|
uint8_t tmp_next_msg_flags = next_msg_flags ?
|
|
*next_msg_flags : 0;
|
|
|
|
if (current->len > 255) {
|
|
current->len = 255U;
|
|
current->flags &= ~I2C_MSG_STOP;
|
|
if (next_msg_flags) {
|
|
*next_msg_flags = current->flags &
|
|
~I2C_MSG_RESTART;
|
|
}
|
|
}
|
|
if ((current->flags & I2C_MSG_RW_MASK) ==
|
|
I2C_MSG_WRITE) {
|
|
ret = stm32_i2c_msg_write(dev, current,
|
|
next_msg_flags,
|
|
slave);
|
|
} else {
|
|
ret = stm32_i2c_msg_read(dev, current,
|
|
next_msg_flags, slave);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
goto exit;
|
|
}
|
|
if (next_msg_flags) {
|
|
*next_msg_flags = tmp_next_msg_flags;
|
|
}
|
|
current->buf += current->len;
|
|
current->flags = tmp_msg_flags;
|
|
current->len = temp_len - current->len;
|
|
} while (current->len > 0);
|
|
current++;
|
|
num_msgs--;
|
|
}
|
|
exit:
|
|
k_sem_give(&data->bus_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_driver_api api_funcs = {
|
|
.configure = i2c_stm32_runtime_configure,
|
|
.transfer = i2c_stm32_transfer,
|
|
#if defined(CONFIG_I2C_SLAVE)
|
|
.slave_register = i2c_stm32_slave_register,
|
|
.slave_unregister = i2c_stm32_slave_unregister,
|
|
#endif
|
|
};
|
|
|
|
static int i2c_stm32_init(const struct device *dev)
|
|
{
|
|
const struct device *clock = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
|
|
const struct i2c_stm32_config *cfg = DEV_CFG(dev);
|
|
uint32_t bitrate_cfg;
|
|
int ret;
|
|
struct i2c_stm32_data *data = DEV_DATA(dev);
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
k_sem_init(&data->device_sync_sem, 0, K_SEM_MAX_LIMIT);
|
|
cfg->irq_config_func(dev);
|
|
#endif
|
|
|
|
/* Configure dt provided device signals when available */
|
|
ret = stm32_dt_pinctrl_configure(cfg->pinctrl_list,
|
|
cfg->pinctrl_list_size,
|
|
(uint32_t)cfg->i2c);
|
|
if (ret < 0) {
|
|
LOG_ERR("I2C pinctrl setup failed (%d)", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* initialize mutex used when multiple transfers
|
|
* are taking place to guarantee that each one is
|
|
* atomic and has exclusive access to the I2C bus.
|
|
*/
|
|
k_sem_init(&data->bus_mutex, 1, 1);
|
|
|
|
if (clock_control_on(clock,
|
|
(clock_control_subsys_t *) &cfg->pclken) != 0) {
|
|
LOG_ERR("i2c: failure enabling clock");
|
|
return -EIO;
|
|
}
|
|
|
|
#if defined(CONFIG_SOC_SERIES_STM32F3X) || defined(CONFIG_SOC_SERIES_STM32F0X)
|
|
/*
|
|
* STM32F0/3 I2C's independent clock source supports only
|
|
* HSI and SYSCLK, not APB1. We force I2C clock source to SYSCLK.
|
|
* I2C2 on STM32F0 uses APB1 clock as I2C clock source
|
|
*/
|
|
|
|
switch ((uint32_t)cfg->i2c) {
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c1), okay)
|
|
case DT_REG_ADDR(DT_NODELABEL(i2c1)):
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C1_CLKSOURCE_SYSCLK);
|
|
break;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SOC_SERIES_STM32F3X) && \
|
|
DT_NODE_HAS_STATUS(DT_NODELABEL(i2c2), okay)
|
|
case DT_REG_ADDR(DT_NODELABEL(i2c2)):
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C2_CLKSOURCE_SYSCLK);
|
|
break;
|
|
#endif
|
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c3), okay)
|
|
case DT_REG_ADDR(DT_NODELABEL(i2c3)):
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C3_CLKSOURCE_SYSCLK);
|
|
break;
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_SOC_SERIES_STM32F3X) || CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
#if defined(CONFIG_SOC_SERIES_STM32F1X)
|
|
/*
|
|
* Force i2c reset for STM32F1 series.
|
|
* So that they can enter master mode properly.
|
|
* Issue described in ES096 2.14.7
|
|
*/
|
|
I2C_TypeDef * i2c = cfg->i2c;
|
|
|
|
LL_I2C_EnableReset(i2c);
|
|
LL_I2C_DisableReset(i2c);
|
|
#endif
|
|
|
|
bitrate_cfg = i2c_map_dt_bitrate(cfg->bitrate);
|
|
|
|
ret = i2c_stm32_runtime_configure(dev, I2C_MODE_MASTER | bitrate_cfg);
|
|
if (ret < 0) {
|
|
LOG_ERR("i2c: failure initializing");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Macros for I2C instance declaration */
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
|
|
#ifdef CONFIG_I2C_STM32_COMBINED_INTERRUPT
|
|
#define STM32_I2C_IRQ_CONNECT_AND_ENABLE(name) \
|
|
do { \
|
|
IRQ_CONNECT(DT_IRQN(DT_NODELABEL(name)), \
|
|
DT_IRQ(DT_NODELABEL(name), priority), \
|
|
stm32_i2c_combined_isr, \
|
|
DEVICE_DT_GET(DT_NODELABEL(name)), 0); \
|
|
irq_enable(DT_IRQN(DT_NODELABEL(name))); \
|
|
} while (0)
|
|
#else
|
|
#define STM32_I2C_IRQ_CONNECT_AND_ENABLE(name) \
|
|
do { \
|
|
IRQ_CONNECT(DT_IRQ_BY_NAME(DT_NODELABEL(name), event, irq),\
|
|
DT_IRQ_BY_NAME(DT_NODELABEL(name), event, \
|
|
priority),\
|
|
stm32_i2c_event_isr, \
|
|
DEVICE_DT_GET(DT_NODELABEL(name)), 0); \
|
|
irq_enable(DT_IRQ_BY_NAME(DT_NODELABEL(name), event, irq));\
|
|
\
|
|
IRQ_CONNECT(DT_IRQ_BY_NAME(DT_NODELABEL(name), error, irq),\
|
|
DT_IRQ_BY_NAME(DT_NODELABEL(name), error, \
|
|
priority),\
|
|
stm32_i2c_error_isr, \
|
|
DEVICE_DT_GET(DT_NODELABEL(name)), 0); \
|
|
irq_enable(DT_IRQ_BY_NAME(DT_NODELABEL(name), error, irq));\
|
|
} while (0)
|
|
#endif /* CONFIG_I2C_STM32_COMBINED_INTERRUPT */
|
|
|
|
#define STM32_I2C_IRQ_HANDLER_DECL(name) \
|
|
static void i2c_stm32_irq_config_func_##name(const struct device *dev)
|
|
#define STM32_I2C_IRQ_HANDLER_FUNCTION(name) \
|
|
.irq_config_func = i2c_stm32_irq_config_func_##name,
|
|
#define STM32_I2C_IRQ_HANDLER(name) \
|
|
static void i2c_stm32_irq_config_func_##name(const struct device *dev) \
|
|
{ \
|
|
STM32_I2C_IRQ_CONNECT_AND_ENABLE(name); \
|
|
}
|
|
#else
|
|
|
|
#define STM32_I2C_IRQ_HANDLER_DECL(name)
|
|
#define STM32_I2C_IRQ_HANDLER_FUNCTION(name)
|
|
#define STM32_I2C_IRQ_HANDLER(name)
|
|
|
|
#endif /* CONFIG_I2C_STM32_INTERRUPT */
|
|
|
|
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32_i2c_v2)
|
|
#define DEFINE_TIMINGS(name) \
|
|
static const uint32_t i2c_timings_##name[] = \
|
|
DT_PROP_OR(DT_NODELABEL(name), timings, {});
|
|
#define USE_TIMINGS(name) \
|
|
.timings = (const struct i2c_config_timing *) i2c_timings_##name, \
|
|
.n_timings = ARRAY_SIZE(i2c_timings_##name),
|
|
#else /* V2 */
|
|
#define DEFINE_TIMINGS(name)
|
|
#define USE_TIMINGS(name)
|
|
#endif /* V2 */
|
|
|
|
#define STM32_I2C_INIT(name) \
|
|
STM32_I2C_IRQ_HANDLER_DECL(name); \
|
|
\
|
|
DEFINE_TIMINGS(name) \
|
|
\
|
|
static const struct soc_gpio_pinctrl i2c_pins_##name[] = \
|
|
ST_STM32_DT_PINCTRL(name, 0); \
|
|
\
|
|
static const struct i2c_stm32_config i2c_stm32_cfg_##name = { \
|
|
.i2c = (I2C_TypeDef *)DT_REG_ADDR(DT_NODELABEL(name)), \
|
|
.pclken = { \
|
|
.enr = DT_CLOCKS_CELL(DT_NODELABEL(name), bits), \
|
|
.bus = DT_CLOCKS_CELL(DT_NODELABEL(name), bus), \
|
|
}, \
|
|
STM32_I2C_IRQ_HANDLER_FUNCTION(name) \
|
|
.bitrate = DT_PROP(DT_NODELABEL(name), clock_frequency), \
|
|
.pinctrl_list = i2c_pins_##name, \
|
|
.pinctrl_list_size = ARRAY_SIZE(i2c_pins_##name), \
|
|
USE_TIMINGS(name) \
|
|
}; \
|
|
\
|
|
static struct i2c_stm32_data i2c_stm32_dev_data_##name; \
|
|
\
|
|
DEVICE_DT_DEFINE(DT_NODELABEL(name), &i2c_stm32_init, \
|
|
NULL, &i2c_stm32_dev_data_##name, \
|
|
&i2c_stm32_cfg_##name, \
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
|
|
&api_funcs); \
|
|
\
|
|
STM32_I2C_IRQ_HANDLER(name)
|
|
|
|
/* I2C instances declaration */
|
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c1), okay)
|
|
STM32_I2C_INIT(i2c1);
|
|
#endif
|
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c2), okay)
|
|
STM32_I2C_INIT(i2c2);
|
|
#endif
|
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c3), okay)
|
|
STM32_I2C_INIT(i2c3);
|
|
#endif
|
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c4), okay)
|
|
STM32_I2C_INIT(i2c4);
|
|
#endif
|
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c5), okay)
|
|
STM32_I2C_INIT(i2c5);
|
|
#endif
|