547 lines
14 KiB
C
547 lines
14 KiB
C
/*
|
|
* Copyright (c) 2018 Linaro Limited
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <kernel.h>
|
|
#include <arch/cpu.h>
|
|
#include <init.h>
|
|
#include <device.h>
|
|
#include <soc.h>
|
|
#include <drivers/uart.h>
|
|
|
|
#if defined(CONFIG_SHARED_IRQ)
|
|
#include <shared_irq.h>
|
|
#endif
|
|
|
|
/*
|
|
* UART PL011 register map structure
|
|
*/
|
|
struct pl011_regs {
|
|
u32_t dr; /* data register */
|
|
union {
|
|
u32_t rsr;
|
|
u32_t ecr;
|
|
};
|
|
u32_t reserved_0[4];
|
|
u32_t fr; /* flags register */
|
|
u32_t reserved_1;
|
|
u32_t ilpr;
|
|
u32_t ibrd;
|
|
u32_t fbrd;
|
|
u32_t lcr_h;
|
|
u32_t cr;
|
|
u32_t ifls;
|
|
u32_t imsc;
|
|
u32_t ris;
|
|
u32_t mis;
|
|
u32_t icr;
|
|
u32_t dmacr;
|
|
};
|
|
|
|
/* Device data structure */
|
|
struct pl011_data {
|
|
u32_t baud_rate; /* Baud rate */
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
uart_irq_callback_user_data_t irq_cb;
|
|
void *irq_cb_data;
|
|
#if defined(CONFIG_UART_PL011_SHARED_IRQ)
|
|
char *shared_irq_dev_name;
|
|
#endif
|
|
#endif
|
|
};
|
|
|
|
#define PL011_BIT_MASK(x, y) (((2 << x) - 1) << y)
|
|
|
|
/* PL011 Uart Flags Register */
|
|
#define PL011_FR_CTS BIT(0) /* clear to send - inverted */
|
|
#define PL011_FR_DSR BIT(1) /* data set ready - inverted */
|
|
#define PL011_FR_DCD BIT(2) /* data carrier detect - inverted */
|
|
#define PL011_FR_BUSY BIT(3) /* busy transmitting data */
|
|
#define PL011_FR_RXFE BIT(4) /* receive FIFO empty */
|
|
#define PL011_FR_TXFF BIT(5) /* transmit FIFO full */
|
|
#define PL011_FR_RXFF BIT(6) /* receive FIFO full */
|
|
#define PL011_FR_TXFE BIT(7) /* transmit FIFO empty */
|
|
#define PL011_FR_RI BIT(8) /* ring indicator - inverted */
|
|
|
|
/* PL011 Integer baud rate register */
|
|
#define PL011_IBRD_BAUD_DIVINT_MASK 0xff /* 16 bits of divider */
|
|
|
|
/* PL011 Fractional baud rate register */
|
|
#define PL011_FBRD_BAUD_DIVFRAC 0x3f
|
|
#define PL011_FBRD_WIDTH 6u
|
|
|
|
/* PL011 Receive status register / error clear register */
|
|
#define PL011_RSR_ECR_FE BIT(0) /* framing error */
|
|
#define PL011_RSR_ECR_PE BIT(1) /* parity erorr */
|
|
#define PL011_RSR_ECR_BE BIT(2) /* break error */
|
|
#define PL011_RSR_ECR_OE BIT(3) /* overrun error */
|
|
|
|
#define PL011_RSR_ERROR_MASK (PL011_RSR_ECR_FE | PL011_RSR_ECR_PE | \
|
|
PL011_RSR_ECR_BE | PL011_RSR_ECR_OE)
|
|
|
|
/* PL011 Line Control Register */
|
|
#define PL011_LCRH_BRK BIT(0) /* send break */
|
|
#define PL011_LCRH_PEN BIT(1) /* enable parity */
|
|
#define PL011_LCRH_EPS BIT(2) /* select even parity */
|
|
#define PL011_LCRH_STP2 BIT(3) /* select two stop bits */
|
|
#define PL011_LCRH_FEN BIT(4) /* enable FIFOs */
|
|
#define PL011_LCRH_WLEN_SHIFT 5 /* word length */
|
|
#define PL011_LCRH_WLEN_WIDTH 2
|
|
#define PL011_LCRH_SPS BIT(7) /* stick parity bit */
|
|
|
|
#define PL011_LCRH_WLEN_SIZE(x) (x - 5)
|
|
|
|
#define PL011_LCRH_FORMAT_MASK (PL011_LCRH_PEN | PL011_LCRH_EPS | \
|
|
PL011_LCRH_SPS | \
|
|
PL011_BIT_MASK(PL011_LCRH_WLEN_WIDTH, PL011_LCRH_WLEN_SHIFT))
|
|
|
|
#define PL011_LCRH_PARTIY_EVEN (PL011_LCRH_PEN | PL011_LCRH_EPS)
|
|
#define PL011_LCRH_PARITY_ODD (PL011_LCRH_PEN)
|
|
#define PL011_LCRH_PARITY_NONE (0)
|
|
|
|
/* PL011 Control Register */
|
|
#define PL011_CR_UARTEN BIT(0) /* enable uart operations */
|
|
#define PL011_CR_SIREN BIT(1) /* enable IrDA SIR */
|
|
#define PL011_CR_SIRLP BIT(2) /* IrDA SIR low power mode */
|
|
#define PL011_CR_LBE BIT(7) /* loop back enable */
|
|
#define PL011_CR_TXE BIT(8) /* transmit enable */
|
|
#define PL011_CR_RXE BIT(9) /* receive enable */
|
|
#define PL011_CR_DTR BIT(10) /* data transmit ready */
|
|
#define PL011_CR_RTS BIT(11) /* request to send */
|
|
#define PL011_CR_Out1 BIT(12)
|
|
#define PL011_CR_Out2 BIT(13)
|
|
#define PL011_CR_RTSEn BIT(14) /* RTS hw flow control enable */
|
|
#define PL011_CR_CTSEn BIT(15) /* CTS hw flow control enable */
|
|
|
|
/* PL011 Interrupt Fifo Level Select Register */
|
|
#define PL011_IFLS_TXIFLSEL_SHIFT 0 /* bits 2:0 */
|
|
#define PL011_IFLS_TXIFLSEL_WIDTH 3
|
|
#define PL011_IFLS_RXIFLSEL_SHIFT 3 /* bits 5:3 */
|
|
#define PL011_IFLS_RXIFLSEL_WIDTH 3
|
|
|
|
/* PL011 Interrupt Mask Set/Clear Register */
|
|
#define PL011_IMSC_RIMIM BIT(0) /* RTR modem interrupt mask */
|
|
#define PL011_IMSC_CTSMIM BIT(1) /* CTS modem interrupt mask */
|
|
#define PL011_IMSC_DCDMIM BIT(2) /* DCD modem interrupt mask */
|
|
#define PL011_IMSC_DSRMIM BIT(3) /* DSR modem interrupt mask */
|
|
#define PL011_IMSC_RXIM BIT(4) /* receive interrupt mask */
|
|
#define PL011_IMSC_TXIM BIT(5) /* transmit interrupt mask */
|
|
#define PL011_IMSC_RTIM BIT(6) /* receive timeout interrupt mask */
|
|
#define PL011_IMSC_FEIM BIT(7) /* framine error interrupt mask */
|
|
#define PL011_IMSC_PEIM BIT(8) /* parity error interrupt mask */
|
|
#define PL011_IMSC_BEIM BIT(9) /* break error interrupt mask */
|
|
#define PL011_IMSC_OEIM BIT(10) /* overrun error interrutpt mask */
|
|
|
|
#define PL011_IMSC_ERROR_MASK (PL011_IMSC_FEIM | \
|
|
PL011_IMSC_PEIM | PL011_IMSC_BEIM | \
|
|
PL011_IMSC_OEIM)
|
|
|
|
#define PL011_IMSC_MASK_ALL (PL011_IMSC_OEIM | PL011_IMSC_BEIM | \
|
|
PL011_IMSC_PEIM | PL011_IMSC_FEIM | \
|
|
PL011_IMSC_RIMIM | PL011_IMSC_CTSMIM | \
|
|
PL011_IMSC_DCDMIM | PL011_IMSC_DSRMIM | \
|
|
PL011_IMSC_RXIM | PL011_IMSC_TXIM | \
|
|
PL011_IMSC_RTIM)
|
|
|
|
#define DEV_CFG(dev) \
|
|
((const struct uart_device_config * const)(dev)->config->config_info)
|
|
#define DEV_DATA(dev) \
|
|
((struct pl011_data *)(dev)->driver_data)
|
|
#define PL011_REGS(dev) \
|
|
((volatile struct pl011_regs *)(DEV_CFG(dev))->base)
|
|
|
|
static void pl011_enable(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->cr |= PL011_CR_UARTEN;
|
|
}
|
|
|
|
static void pl011_disable(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->cr &= ~PL011_CR_UARTEN;
|
|
}
|
|
|
|
static void pl011_enable_fifo(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->lcr_h |= PL011_LCRH_FEN;
|
|
}
|
|
|
|
static void pl011_disable_fifo(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->lcr_h &= ~PL011_LCRH_FEN;
|
|
}
|
|
|
|
static int pl011_set_baudrate(struct device *dev,
|
|
u32_t clk, u32_t baudrate)
|
|
{
|
|
/* Avoiding float calculations, bauddiv is left shifted by 6 */
|
|
u64_t bauddiv = (((u64_t)clk) << PL011_FBRD_WIDTH)
|
|
/ (baudrate * 16U);
|
|
|
|
/* Valid bauddiv value
|
|
* uart_clk (min) >= 16 x baud_rate (max)
|
|
* uart_clk (max) <= 16 x 65535 x baud_rate (min)
|
|
*/
|
|
if ((bauddiv < (1u << PL011_FBRD_WIDTH))
|
|
|| (bauddiv > (65535u << PL011_FBRD_WIDTH))) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
PL011_REGS(dev)->ibrd = bauddiv >> PL011_FBRD_WIDTH;
|
|
PL011_REGS(dev)->fbrd = bauddiv & ((1u << PL011_FBRD_WIDTH) - 1u);
|
|
|
|
__DMB();
|
|
|
|
/* In order to internally update the contents of ibrd or fbrd, a
|
|
* lcr_h write must always be performed at the end
|
|
* ARM DDI 0183F, Pg 3-13
|
|
*/
|
|
PL011_REGS(dev)->lcr_h = PL011_REGS(dev)->lcr_h;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool pl011_is_readable(struct device *dev)
|
|
{
|
|
if ((PL011_REGS(dev)->cr & PL011_CR_UARTEN) &&
|
|
(PL011_REGS(dev)->cr & PL011_CR_RXE) &&
|
|
((PL011_REGS(dev)->fr & PL011_FR_RXFE) == 0U)) {
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int pl011_poll_in(struct device *dev, unsigned char *c)
|
|
{
|
|
if (!pl011_is_readable(dev)) {
|
|
return -1;
|
|
}
|
|
|
|
/* got a character */
|
|
*c = (unsigned char)PL011_REGS(dev)->dr;
|
|
|
|
return PL011_REGS(dev)->rsr & PL011_RSR_ERROR_MASK;
|
|
}
|
|
|
|
static void pl011_poll_out(struct device *dev,
|
|
unsigned char c)
|
|
{
|
|
/* Wait for space in FIFO */
|
|
while (PL011_REGS(dev)->fr & PL011_FR_TXFF) {
|
|
; /* Wait */
|
|
}
|
|
|
|
/* Send a character */
|
|
PL011_REGS(dev)->dr = (u32_t)c;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static int pl011_fifo_fill(struct device *dev,
|
|
const u8_t *tx_data, int len)
|
|
{
|
|
u8_t num_tx = 0U;
|
|
|
|
while (!(PL011_REGS(dev)->fr & PL011_FR_TXFF) &&
|
|
(len - num_tx > 0)) {
|
|
PL011_REGS(dev)->dr = tx_data[num_tx++];
|
|
}
|
|
return num_tx;
|
|
}
|
|
|
|
static int pl011_fifo_read(struct device *dev,
|
|
u8_t *rx_data, const int len)
|
|
{
|
|
u8_t num_rx = 0U;
|
|
|
|
while ((len - num_rx > 0) &&
|
|
!(PL011_REGS(dev)->fr & PL011_FR_RXFE)) {
|
|
rx_data[num_rx++] = PL011_REGS(dev)->dr;
|
|
}
|
|
|
|
return num_rx;
|
|
}
|
|
|
|
static void pl011_irq_tx_enable(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->imsc |= PL011_IMSC_TXIM;
|
|
}
|
|
|
|
static void pl011_irq_tx_disable(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->imsc &= ~PL011_IMSC_TXIM;
|
|
}
|
|
|
|
static int pl011_irq_tx_complete(struct device *dev)
|
|
{
|
|
/* check for TX FIFO empty */
|
|
return PL011_REGS(dev)->fr & PL011_FR_TXFE;
|
|
}
|
|
|
|
static int pl011_irq_tx_ready(struct device *dev)
|
|
{
|
|
return ((PL011_REGS(dev)->cr & PL011_CR_TXE) &&
|
|
(PL011_REGS(dev)->imsc & PL011_IMSC_TXIM) &&
|
|
pl011_irq_tx_complete(dev));
|
|
}
|
|
|
|
static void pl011_irq_rx_enable(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->imsc |= PL011_IMSC_RXIM |
|
|
PL011_IMSC_RTIM;
|
|
}
|
|
|
|
static void pl011_irq_rx_disable(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->imsc &= ~(PL011_IMSC_RXIM |
|
|
PL011_IMSC_RTIM);
|
|
}
|
|
|
|
static int pl011_irq_rx_ready(struct device *dev)
|
|
{
|
|
return ((PL011_REGS(dev)->cr & PL011_CR_RXE) &&
|
|
(PL011_REGS(dev)->imsc & PL011_IMSC_RXIM) &&
|
|
(!(PL011_REGS(dev)->fr & PL011_FR_RXFE)));
|
|
}
|
|
|
|
static void pl011_irq_err_enable(struct device *dev)
|
|
{
|
|
/* enable framing, parity, break, and overrun */
|
|
PL011_REGS(dev)->imsc |= PL011_IMSC_ERROR_MASK;
|
|
}
|
|
|
|
static void pl011_irq_err_disable(struct device *dev)
|
|
{
|
|
PL011_REGS(dev)->imsc &= ~PL011_IMSC_ERROR_MASK;
|
|
}
|
|
|
|
static int pl011_irq_is_pending(struct device *dev)
|
|
{
|
|
return pl011_irq_rx_ready(dev) || pl011_irq_tx_ready(dev);
|
|
}
|
|
|
|
static int pl011_irq_update(struct device *dev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void pl011_irq_callback_set(struct device *dev,
|
|
uart_irq_callback_user_data_t cb,
|
|
void *cb_data)
|
|
{
|
|
DEV_DATA(dev)->irq_cb = cb;
|
|
DEV_DATA(dev)->irq_cb_data = cb_data;
|
|
}
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
static const struct uart_driver_api pl011_driver_api = {
|
|
.poll_in = pl011_poll_in,
|
|
.poll_out = pl011_poll_out,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.fifo_fill = pl011_fifo_fill,
|
|
.fifo_read = pl011_fifo_read,
|
|
.irq_tx_enable = pl011_irq_tx_enable,
|
|
.irq_tx_disable = pl011_irq_tx_disable,
|
|
.irq_tx_ready = pl011_irq_tx_ready,
|
|
.irq_rx_enable = pl011_irq_rx_enable,
|
|
.irq_rx_disable = pl011_irq_rx_disable,
|
|
.irq_tx_complete = pl011_irq_tx_complete,
|
|
.irq_rx_ready = pl011_irq_rx_ready,
|
|
.irq_err_enable = pl011_irq_err_enable,
|
|
.irq_err_disable = pl011_irq_err_disable,
|
|
.irq_is_pending = pl011_irq_is_pending,
|
|
.irq_update = pl011_irq_update,
|
|
.irq_callback_set = pl011_irq_callback_set,
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
};
|
|
|
|
static int pl011_init(struct device *dev)
|
|
{
|
|
int ret;
|
|
u32_t lcrh;
|
|
|
|
/* disable the uart */
|
|
pl011_disable(dev);
|
|
pl011_disable_fifo(dev);
|
|
|
|
/* Set baud rate */
|
|
ret = pl011_set_baudrate(dev, DEV_CFG(dev)->sys_clk_freq,
|
|
DEV_DATA(dev)->baud_rate);
|
|
if (ret != 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* Setting the default character format */
|
|
lcrh = PL011_REGS(dev)->lcr_h & ~(PL011_LCRH_FORMAT_MASK);
|
|
lcrh &= ~(BIT(0) | BIT(7));
|
|
lcrh |= PL011_LCRH_WLEN_SIZE(8) << PL011_LCRH_WLEN_SHIFT;
|
|
PL011_REGS(dev)->lcr_h = lcrh;
|
|
|
|
/* Enabling the FIFOs */
|
|
pl011_enable_fifo(dev);
|
|
|
|
/* initialize all IRQs as masked */
|
|
PL011_REGS(dev)->imsc = 0U;
|
|
PL011_REGS(dev)->icr = PL011_IMSC_MASK_ALL;
|
|
|
|
PL011_REGS(dev)->dmacr = 0U;
|
|
__ISB();
|
|
PL011_REGS(dev)->cr &= ~(BIT(14) | BIT(15) | BIT(1));
|
|
PL011_REGS(dev)->cr |= PL011_CR_RXE | PL011_CR_TXE;
|
|
__ISB();
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
DEV_CFG(dev)->irq_config_func(dev);
|
|
#endif
|
|
pl011_enable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
void pl011_isr(void *arg)
|
|
{
|
|
struct device *dev = arg;
|
|
struct pl011_data *data = DEV_DATA(dev);
|
|
|
|
/* Verify if the callback has been registered */
|
|
if (data->irq_cb) {
|
|
data->irq_cb(data->irq_cb_data);
|
|
}
|
|
}
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
|
|
#ifdef CONFIG_UART_PL011_PORT0
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void pl011_irq_config_func_0(struct device *dev);
|
|
#endif
|
|
|
|
static struct uart_device_config pl011_cfg_port_0 = {
|
|
.base = (u8_t *)DT_PL011_PORT0_BASE_ADDRESS,
|
|
.sys_clk_freq = DT_PL011_PORT0_CLOCK_FREQUENCY,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = pl011_irq_config_func_0,
|
|
#endif
|
|
};
|
|
|
|
static struct pl011_data pl011_data_port_0 = {
|
|
.baud_rate = DT_PL011_PORT0_BAUD_RATE,
|
|
#if defined(CONFIG_UART_PL011_SHARED_IRQ)
|
|
.shared_irq_dev_name = DT_INST_0_SHARED_IRQ_LABEL,
|
|
#endif
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(pl011_port_0,
|
|
DT_PL011_PORT0_NAME,
|
|
&pl011_init,
|
|
&pl011_data_port_0,
|
|
&pl011_cfg_port_0, PRE_KERNEL_1,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&pl011_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void pl011_irq_config_func_0(struct device *dev)
|
|
{
|
|
#if defined(CONFIG_UART_PL011_PORT0_SHARED_IRQ)
|
|
struct device *shared_irq_dev;
|
|
|
|
shared_irq_dev = device_get_binding(DEV_DATA(dev)->shared_irq_dev_name);
|
|
__ASSERT(shared_irq_dev != NULL, "Failed to get shared irq");
|
|
shared_irq_isr_register(shared_irq_dev, (isr_t)pl011_isr, dev);
|
|
shared_irq_enable(shared_irq_dev, dev);
|
|
#else
|
|
IRQ_CONNECT(DT_PL011_PORT0_IRQ_TX,
|
|
DT_PL011_PORT0_IRQ_PRI,
|
|
pl011_isr,
|
|
DEVICE_GET(pl011_port_0),
|
|
0);
|
|
irq_enable(DT_PL011_PORT0_IRQ_TX);
|
|
|
|
IRQ_CONNECT(DT_PL011_PORT0_IRQ_RX,
|
|
DT_PL011_PORT0_IRQ_PRI,
|
|
pl011_isr,
|
|
DEVICE_GET(pl011_port_0),
|
|
0);
|
|
irq_enable(DT_PL011_PORT0_IRQ_RX);
|
|
|
|
IRQ_CONNECT(DT_PL011_PORT0_IRQ_RXTIM,
|
|
DT_PL011_PORT0_IRQ_PRI,
|
|
pl011_isr,
|
|
DEVICE_GET(pl011_port_0),
|
|
0);
|
|
irq_enable(DT_PL011_PORT0_IRQ_RXTIM);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_PL011_PORT0 */
|
|
|
|
#ifdef CONFIG_UART_PL011_PORT1
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void pl011_irq_config_func_1(struct device *dev);
|
|
#endif
|
|
|
|
static struct uart_device_config pl011_cfg_port_1 = {
|
|
.base = (u8_t *)DT_PL011_PORT1_BASE_ADDRESS,
|
|
.sys_clk_freq = DT_PL011_PORT1_CLOCK_FREQUENCY,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.irq_config_func = pl011_irq_config_func_1,
|
|
#endif
|
|
};
|
|
|
|
static struct pl011_data pl011_data_port_1 = {
|
|
.baud_rate = DT_PL011_PORT1_BAUD_RATE,
|
|
#if defined(CONFIG_UART_PL011_SHARED_IRQ)
|
|
.shared_irq_dev_name = DT_INST_1_SHARED_IRQ_LABEL,
|
|
#endif
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(pl011_port_1,
|
|
DT_PL011_PORT1_NAME,
|
|
&pl011_init,
|
|
&pl011_data_port_1,
|
|
&pl011_cfg_port_1, PRE_KERNEL_1,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&pl011_driver_api);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void pl011_irq_config_func_1(struct device *dev)
|
|
{
|
|
#if defined(CONFIG_UART_PL011_PORT1_SHARED_IRQ)
|
|
struct device *shared_irq_dev;
|
|
|
|
shared_irq_dev = device_get_binding(DEV_DATA(dev)->shared_irq_dev_name);
|
|
__ASSERT(shared_irq_dev != NULL, "Failed to get shared irq");
|
|
shared_irq_isr_register(shared_irq_dev, (isr_t)pl011_isr, dev);
|
|
shared_irq_enable(shared_irq_dev, dev);
|
|
#else
|
|
IRQ_CONNECT(DT_PL011_PORT1_IRQ_TX,
|
|
DT_PL011_PORT1_IRQ_PRI,
|
|
pl011_isr,
|
|
DEVICE_GET(pl011_port_1),
|
|
0);
|
|
irq_enable(DT_PL011_PORT1_IRQ_TX);
|
|
|
|
IRQ_CONNECT(DT_PL011_PORT1_IRQ_RX,
|
|
DT_PL011_PORT1_IRQ_PRI,
|
|
pl011_isr,
|
|
DEVICE_GET(pl011_port_1),
|
|
0);
|
|
irq_enable(DT_PL011_PORT1_IRQ_RX);
|
|
|
|
IRQ_CONNECT(DT_PL011_PORT1_IRQ_RXTIM,
|
|
DT_PL011_PORT1_IRQ_PRI,
|
|
pl011_isr,
|
|
DEVICE_GET(pl011_port_1),
|
|
0);
|
|
irq_enable(DT_PL011_PORT1_IRQ_RXTIM);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_UART_PL011_PORT1 */
|