206 lines
4.6 KiB
Plaintext
206 lines
4.6 KiB
Plaintext
# MAX30101 heart rate sensor
|
|
|
|
# Copyright (c) 2017, NXP
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
menuconfig MAX30101
|
|
bool "MAX30101 Pulse Oximeter and Heart Rate Sensor"
|
|
default y
|
|
depends on DT_HAS_MAXIM_MAX30101_ENABLED
|
|
depends on I2C
|
|
|
|
if MAX30101
|
|
|
|
config MAX30101_SMP_AVE
|
|
int "Sample averaging"
|
|
range 0 7
|
|
default 0
|
|
help
|
|
To reduce the amount of data throughput, adjacent samples (in each
|
|
individual channel) can be averaged and decimated on the chip by
|
|
setting this register. Set to 0 for no averaging.
|
|
0 = 1 sample (no averaging)
|
|
1 = 2 samples
|
|
2 = 4 samples
|
|
3 = 8 samples
|
|
4 = 16 samples
|
|
5 = 32 samples
|
|
6 = 32 samples
|
|
7 = 32 samples
|
|
|
|
config MAX30101_FIFO_ROLLOVER_EN
|
|
bool "FIFO rolls on full"
|
|
help
|
|
Controls the behavior of the FIFO when the FIFO becomes completely
|
|
filled with data. If set, the FIFO address rolls over to zero and the
|
|
FIFO continues to fill with new data. If not set, then the FIFO is
|
|
not updated until FIFO_DATA is read or the WRITE/READ pointer
|
|
positions are changed.
|
|
|
|
config MAX30101_FIFO_A_FULL
|
|
int "FIFO almost full value"
|
|
range 0 15
|
|
default 0
|
|
help
|
|
Set the trigger for the FIFO_A_FULL interrupt
|
|
|
|
choice MAX30101_MODE
|
|
prompt "Mode control"
|
|
default MAX30101_MULTI_LED_MODE
|
|
|
|
config MAX30101_HEART_RATE_MODE
|
|
bool "Heart rate mode"
|
|
help
|
|
Set to operate in heart rate only mode. The red LED channel is
|
|
active.
|
|
|
|
config MAX30101_SPO2_MODE
|
|
bool "SpO2 mode"
|
|
help
|
|
Set to operate in SpO2 mode. The red and IR LED channels are active.
|
|
|
|
config MAX30101_MULTI_LED_MODE
|
|
bool "Multi-LED mode"
|
|
help
|
|
Set to operate in multi-LED mode. The green, red, and/or IR LED
|
|
channels are active.
|
|
|
|
endchoice
|
|
|
|
config MAX30101_ADC_RGE
|
|
int "ADC range control"
|
|
range 0 3
|
|
default 2
|
|
help
|
|
Set the ADC's full-scale range.
|
|
0 = 7.81 pA/LSB
|
|
1 = 15.63 pA/LSB
|
|
2 = 31.25 pA/LSB
|
|
3 = 62.5 pA/LSB
|
|
|
|
config MAX30101_SR
|
|
int "ADC sample rate control"
|
|
range 0 7
|
|
default 0
|
|
help
|
|
Set the effective sampling rate with one sample consisting of one
|
|
pulse/conversion per active LED channel. In SpO2 mode, these means
|
|
one IR pulse/conversion and one red pulse/conversion per sample
|
|
period.
|
|
0 = 50 Hz
|
|
1 = 100 Hz
|
|
2 = 200 Hz
|
|
3 = 400 Hz
|
|
4 = 800 Hz
|
|
5 = 1000 Hz
|
|
6 = 1600 Hz
|
|
7 = 3200 Hz
|
|
|
|
config MAX30101_LED1_PA
|
|
hex "LED1 (red) pulse amplitude"
|
|
range 0 0xff
|
|
default 0xff
|
|
help
|
|
Set the pulse amplitude to control the LED1 (red) current. The actual
|
|
measured LED current for each part can vary significantly due to the
|
|
trimming methodology.
|
|
0x00 = 0.0 mA
|
|
0x01 = 0.2 mA
|
|
0x02 = 0.4 mA
|
|
0x0f = 3.1 mA
|
|
0xff = 50.0 mA
|
|
|
|
config MAX30101_LED2_PA
|
|
hex "LED2 (IR) pulse amplitude"
|
|
range 0 0xff
|
|
default 0x33
|
|
help
|
|
Set the pulse amplitude to control the LED2 (IR) current. The actual
|
|
measured LED current for each part can vary significantly due to the
|
|
trimming methodology.
|
|
0x00 = 0.0 mA
|
|
0x01 = 0.2 mA
|
|
0x02 = 0.4 mA
|
|
0x0f = 3.1 mA
|
|
0xff = 50.0 mA
|
|
|
|
config MAX30101_LED3_PA
|
|
hex "LED2 (green) pulse amplitude"
|
|
range 0 0xff
|
|
default 0xff
|
|
help
|
|
Set the pulse amplitude to control the LED3 (green) current. The
|
|
actual measured LED current for each part can vary significantly due
|
|
to the trimming methodology.
|
|
0x00 = 0.0 mA
|
|
0x01 = 0.2 mA
|
|
0x02 = 0.4 mA
|
|
0x0f = 3.1 mA
|
|
0xff = 50.0 mA
|
|
|
|
if MAX30101_MULTI_LED_MODE
|
|
|
|
config MAX30101_SLOT1
|
|
int "Slot 1"
|
|
range 0 7
|
|
default 3
|
|
help
|
|
Set which LED and pulse amplitude are active in time slot 1.
|
|
0: None (disabled)
|
|
1: LED1 (red), LED1_PA
|
|
2: LED2 (IR), LED2_PA
|
|
3: LED3 (green), LED3_PA
|
|
4: None (disabled)
|
|
5: LED1 (red), PILOT_PA
|
|
6: LED2 (IR), PILOT_PA
|
|
7: LED3 (green), PILOT_PA
|
|
|
|
config MAX30101_SLOT2
|
|
int "Slot 2"
|
|
range 0 7
|
|
default 0
|
|
help
|
|
Set which LED and pulse amplitude are active in time slot 2.
|
|
0: None (disabled)
|
|
1: LED1 (red), LED1_PA
|
|
2: LED2 (IR), LED2_PA
|
|
3: LED3 (green), LED3_PA
|
|
4: None (disabled)
|
|
5: LED1 (red), PILOT_PA
|
|
6: LED2 (IR), PILOT_PA
|
|
7: LED3 (green), PILOT_PA
|
|
|
|
config MAX30101_SLOT3
|
|
int "Slot 3"
|
|
range 0 7
|
|
default 0
|
|
help
|
|
Set which LED and pulse amplitude are active in time slot 3.
|
|
0: None (disabled)
|
|
1: LED1 (red), LED1_PA
|
|
2: LED2 (IR), LED2_PA
|
|
3: LED3 (green), LED3_PA
|
|
4: None (disabled)
|
|
5: LED1 (red), PILOT_PA
|
|
6: LED2 (IR), PILOT_PA
|
|
7: LED3 (green), PILOT_PA
|
|
|
|
config MAX30101_SLOT4
|
|
int "Slot 4"
|
|
range 0 7
|
|
default 0
|
|
help
|
|
Set which LED and pulse amplitude are active in time slot 4.
|
|
0: None (disabled)
|
|
1: LED1 (red), LED1_PA
|
|
2: LED2 (IR), LED2_PA
|
|
3: LED3 (green), LED3_PA
|
|
4: None (disabled)
|
|
5: LED1 (red), PILOT_PA
|
|
6: LED2 (IR), PILOT_PA
|
|
7: LED3 (green), PILOT_PA
|
|
|
|
endif # MAX30101_MULTI_LED_MODE
|
|
|
|
endif # MAX30101
|