zephyr

History

Mariusz Skamra 8f5ba0be88 Bluetooth: Add common Kconfig option to disable LE Data Length Update This adds common option to disable support for LE Data Length Update procedure in controller and host. This will reduce flash usage by compiling out le_data_len_change event handler that will never be called if controller has been compiled with BT_CTLR_DATA_LENGTH option disabled. Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>		2018-11-21 12:26:27 -05:00
..
src	boards: bbc_microbit: Move button data into dts from board.h	2018-11-01 15:58:51 -05:00
CMakeLists.txt	samples, tests: Use semi-accurate project names	2018-10-27 21:31:25 -04:00
README.rst	…
microbit_gatt.conf	Bluetooth: Add common Kconfig option to disable LE Data Length Update	2018-11-21 12:26:27 -05:00
prj.conf	Bluetooth: Add common Kconfig option to disable LE Data Length Update	2018-11-21 12:26:27 -05:00
prj_bbc_microbit.conf	Bluetooth: Add common Kconfig option to disable LE Data Length Update	2018-11-21 12:26:27 -05:00
prj_nrf51_blenano.conf	Bluetooth: Add common Kconfig option to disable LE Data Length Update	2018-11-21 12:26:27 -05:00
sample.yaml	…

README.rst

.. _ble_mesh:

Bluetooth: Mesh
###############

Overview
********

This sample demonstrates Bluetooth Mesh functionality. It has several
standard Mesh models, and supports provisioning over both the
Advertising and the GATT Provisioning Bearers (i.e. PB-ADV and PB-GATT).
The application also needs a functioning serial console, since that's
used for the Out-of-Band provisioning procedure.

Requirements
************

* A board with Bluetooth LE support, or
* QEMU with BlueZ running on the host

Building and Running
********************

This sample can be found under :file:`samples/bluetooth/mesh` in the
Zephyr tree.

See :ref:`bluetooth setup section <bluetooth_setup>` for details on how
to run the sample inside QEMU.

For other boards, build and flash the application as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/bluetooth/mesh
   :board: <board>
   :goals: flash
   :compact:

Refer to your :ref:`board's documentation <boards>` for alternative
flash instructions if your board doesn't support the ``flash`` target.