188 lines
4.8 KiB
Plaintext
188 lines
4.8 KiB
Plaintext
# Kconfig.cc1200 - TI CC1200 configuration options
|
|
#
|
|
|
|
menuconfig IEEE802154_CC1200
|
|
bool "TI CC1200 Driver support"
|
|
depends on NETWORKING
|
|
select NET_L2_IEEE802154_SUB_GHZ
|
|
default n
|
|
|
|
if IEEE802154_CC1200
|
|
|
|
config IEEE802154_CC1200_DRV_NAME
|
|
string "TI CC1200 Driver's name"
|
|
default "cc1200"
|
|
help
|
|
This option sets the driver name
|
|
|
|
config IEEE802154_CC1200_SPI_DRV_NAME
|
|
string "SPI driver's name to use to access CC1200"
|
|
default ""
|
|
help
|
|
This option is mandatory to set which SPI controller to use in order
|
|
to actually control the CC1200 chip.
|
|
|
|
config IEEE802154_CC1200_SPI_FREQ
|
|
int "SPI system frequency"
|
|
default 0
|
|
help
|
|
This option sets the SPI controller's frequency. Beware this value
|
|
depends on the SPI controller being used and also on the system
|
|
clock.
|
|
|
|
config IEEE802154_CC1200_SPI_SLAVE
|
|
int "SPI slave linked to CC1200"
|
|
default 0
|
|
help
|
|
This option sets the SPI slave number SPI controller has to switch
|
|
to when dealing with CC1200 chip.
|
|
|
|
config IEEE802154_CC1200_GPIO_SPI_CS
|
|
bool "Manage SPI CS through a GPIO pin"
|
|
default n
|
|
help
|
|
This option is useful if one needs to manage SPI CS through a GPIO
|
|
pin to by-pass the SPI controller's CS logic.
|
|
|
|
config IEEE802154_CC1200_GPIO_SPI_CS_DRV_NAME
|
|
string "GPIO driver's name to use to drive SPI CS through"
|
|
default ""
|
|
depends on IEEE802154_CC1200_GPIO_SPI_CS
|
|
help
|
|
This option is mandatory to set which GPIO controller to use in order
|
|
to actually emulate the SPI CS.
|
|
|
|
config IEEE802154_CC1200_GPIO_SPI_CS_PIN
|
|
int "GPIO PIN to use to drive SPI CS through"
|
|
default 0
|
|
depends on IEEE802154_CC1200_GPIO_SPI_CS
|
|
help
|
|
This option is mandatory to set which GPIO pin to use in order
|
|
to actually emulate the SPI CS.
|
|
|
|
config IEEE802154_CC1200_RX_STACK_SIZE
|
|
int "Driver's internal RX thread stack size"
|
|
default 800
|
|
help
|
|
This option sets the driver's stack size for its internal RX thread.
|
|
The default value should be sufficient, but in case it proves to be
|
|
a too little one, this option makes it easy to play with the size.
|
|
|
|
config IEEE802154_CC1200_INIT_PRIO
|
|
int "CC1200 initialization priority"
|
|
default 80
|
|
help
|
|
Set the initialization priority number. Do not mess with it unless
|
|
you know what you are doing. Beware cc1200 requires gpio and spi to
|
|
be ready first (and sometime gpio should be the very first as spi
|
|
might need it too). And of course it has to start before the net stack.
|
|
|
|
config IEEE802154_CC1200_RANDOM_MAC
|
|
bool "Random MAC address"
|
|
default y
|
|
help
|
|
Generate a random MAC address dynamically.
|
|
|
|
if ! IEEE802154_CC1200_RANDOM_MAC
|
|
|
|
config IEEE802154_CC1200_MAC4
|
|
hex "MAC Address Byte 4"
|
|
default 0
|
|
range 0 ff
|
|
help
|
|
This is the byte 4 of the MAC address.
|
|
|
|
config IEEE802154_CC1200_MAC5
|
|
hex "MAC Address Byte 5"
|
|
default 0
|
|
range 0 ff
|
|
help
|
|
This is the byte 5 of the MAC address.
|
|
|
|
config IEEE802154_CC1200_MAC6
|
|
hex "MAC Address Byte 6"
|
|
default 0
|
|
range 0 ff
|
|
help
|
|
This is the byte 6 of the MAC address.
|
|
|
|
config IEEE802154_CC1200_MAC7
|
|
hex "MAC Address Byte 7"
|
|
default 0
|
|
range 0 ff
|
|
help
|
|
This is the byte 7 of the MAC address.
|
|
|
|
endif # IEEE802154_CC1200_RANDOM_MAC
|
|
|
|
config IEEE802154_CC1200_XOSC
|
|
int "Value of the Crystal oscillator in kHz"
|
|
default 40000
|
|
help
|
|
This sets the XOSC value, it must be between 38400 and 40000.
|
|
This value should follow what has been set in the RF settings via
|
|
SmartRF tool. Do not touch this unless you know what you are doing.
|
|
|
|
config IEEE802154_CC1200_RF_PRESET
|
|
bool "Use TI CC1200 RF pre-sets"
|
|
default y
|
|
|
|
choice
|
|
prompt "TI CC1200 RF preset"
|
|
default IEEE802154_CC1200_RF_SET_0
|
|
depends on IEEE802154_CC1200_RF_PRESET
|
|
help
|
|
Set the RF preset you want to use.
|
|
|
|
config IEEE802154_CC1200_RF_SET_0
|
|
bool "868MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI"
|
|
|
|
config IEEE802154_CC1200_RF_SET_1
|
|
bool "920MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ARIB"
|
|
|
|
config IEEE802154_CC1200_RF_SET_2
|
|
bool "434MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI"
|
|
|
|
endchoice
|
|
|
|
config IEEE802154_CC1200_CCA_THRESHOLD
|
|
int "Value in dbm of the CCA threshold"
|
|
default -91
|
|
help
|
|
Set the CCA threshold. See datasheet's AGC_CS_THR register for
|
|
more information. Do not touch this unless you know what you are doing.
|
|
|
|
config IEEE802154_CC1200_RSSI_OFFSET
|
|
int "Value in dbm of the RSSI offset"
|
|
default -81
|
|
help
|
|
Set the gain adjustment. See datasheet's AGC_GAIN_ADJUST register for
|
|
more information. Do not touch this unless you know what you are doing.
|
|
|
|
# Do no touch below settings unless you know what you are doing
|
|
config IEEE802154_CC1200_SETTLING_CFG
|
|
hex
|
|
default 0x03
|
|
|
|
config IEEE802154_CC1200_PKTCFG0
|
|
hex
|
|
default 0x20
|
|
|
|
config IEEE802154_CC1200_PKTCFG1
|
|
hex
|
|
default 0x03
|
|
|
|
config IEEE802154_CC1200_PKTCFG2
|
|
hex
|
|
default 0x00
|
|
|
|
config IEEE802154_CC1200_RFEND_CFG1
|
|
hex
|
|
default 0x3F
|
|
|
|
config IEEE802154_CC1200_RFEND_CFG0
|
|
hex
|
|
default 0x00
|
|
|
|
endif # IEEE802154_CC1200
|