169 lines
4.8 KiB
C
169 lines
4.8 KiB
C
/*
|
|
* Copyright (c) 2018 Cypress
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
/** @file
|
|
* @brief UART driver for Cypress PSoC6 MCU family.
|
|
*
|
|
* Note:
|
|
* - Error handling is not implemented.
|
|
* - The driver works only in polling mode, interrupt mode is not implemented.
|
|
*/
|
|
#include <device.h>
|
|
#include <errno.h>
|
|
#include <init.h>
|
|
#include <misc/__assert.h>
|
|
#include <soc.h>
|
|
#include <uart.h>
|
|
|
|
#include "cy_syslib.h"
|
|
#include "cy_sysclk.h"
|
|
#include "cy_gpio.h"
|
|
#include "cy_scb_uart.h"
|
|
|
|
/*
|
|
* Verify Kconfig configuration
|
|
*/
|
|
|
|
struct cypress_psoc6_config {
|
|
CySCB_Type *base;
|
|
GPIO_PRT_Type *port;
|
|
u32_t rx_num;
|
|
u32_t tx_num;
|
|
en_hsiom_sel_t rx_val;
|
|
en_hsiom_sel_t tx_val;
|
|
en_clk_dst_t scb_clock;
|
|
};
|
|
|
|
/* Populate configuration structure */
|
|
static const cy_stc_scb_uart_config_t uartConfig = {
|
|
.uartMode = CY_SCB_UART_STANDARD,
|
|
.enableMutliProcessorMode = false,
|
|
.smartCardRetryOnNack = false,
|
|
.irdaInvertRx = false,
|
|
.irdaEnableLowPowerReceiver = false,
|
|
|
|
.oversample = DT_UART_PSOC6_CONFIG_OVERSAMPLE,
|
|
|
|
.enableMsbFirst = false,
|
|
.dataWidth = DT_UART_PSOC6_CONFIG_DATAWIDTH,
|
|
.parity = CY_SCB_UART_PARITY_NONE,
|
|
.stopBits = CY_SCB_UART_STOP_BITS_1,
|
|
.enableInputFilter = false,
|
|
.breakWidth = DT_UART_PSOC6_CONFIG_BREAKWIDTH,
|
|
.dropOnFrameError = false,
|
|
.dropOnParityError = false,
|
|
|
|
.receiverAddress = 0UL,
|
|
.receiverAddressMask = 0UL,
|
|
.acceptAddrInFifo = false,
|
|
|
|
.enableCts = false,
|
|
.ctsPolarity = CY_SCB_UART_ACTIVE_LOW,
|
|
.rtsRxFifoLevel = 0UL,
|
|
.rtsPolarity = CY_SCB_UART_ACTIVE_LOW,
|
|
|
|
.rxFifoTriggerLevel = 0UL,
|
|
.rxFifoIntEnableMask = 0UL,
|
|
.txFifoTriggerLevel = 0UL,
|
|
.txFifoIntEnableMask = 0UL,
|
|
};
|
|
|
|
/**
|
|
* Function Name: uart_psoc6_init()
|
|
*
|
|
* Peforms hardware initialization: debug UART.
|
|
*
|
|
*/
|
|
static int uart_psoc6_init(struct device *dev)
|
|
{
|
|
const struct cypress_psoc6_config *config = dev->config->config_info;
|
|
|
|
/* Connect SCB5 UART function to pins */
|
|
Cy_GPIO_SetHSIOM(config->port, config->rx_num, config->rx_val);
|
|
Cy_GPIO_SetHSIOM(config->port, config->tx_num, config->tx_val);
|
|
|
|
/* Configure pins for UART operation */
|
|
Cy_GPIO_SetDrivemode(config->port, config->rx_num, CY_GPIO_DM_HIGHZ);
|
|
Cy_GPIO_SetDrivemode(config->port, config->tx_num,
|
|
CY_GPIO_DM_STRONG_IN_OFF);
|
|
|
|
/* Connect assigned divider to be a clock source for UART */
|
|
Cy_SysClk_PeriphAssignDivider(config->scb_clock,
|
|
DT_UART_PSOC6_UART_CLK_DIV_TYPE,
|
|
DT_UART_PSOC6_UART_CLK_DIV_NUMBER);
|
|
|
|
Cy_SysClk_PeriphSetDivider(DT_UART_PSOC6_UART_CLK_DIV_TYPE,
|
|
DT_UART_PSOC6_UART_CLK_DIV_NUMBER,
|
|
DT_UART_PSOC6_UART_CLK_DIV_VAL);
|
|
Cy_SysClk_PeriphEnableDivider(DT_UART_PSOC6_UART_CLK_DIV_TYPE,
|
|
DT_UART_PSOC6_UART_CLK_DIV_NUMBER);
|
|
|
|
/* Configure UART to operate */
|
|
(void) Cy_SCB_UART_Init(config->base, &uartConfig, NULL);
|
|
Cy_SCB_UART_Enable(config->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uart_psoc6_poll_in(struct device *dev, unsigned char *c)
|
|
{
|
|
const struct cypress_psoc6_config *config = dev->config->config_info;
|
|
u32_t rec;
|
|
|
|
rec = Cy_SCB_UART_Get(config->base);
|
|
*c = (unsigned char)(rec & 0xff);
|
|
|
|
return ((rec == CY_SCB_UART_RX_NO_DATA) ? -1 : 0);
|
|
}
|
|
|
|
static void uart_psoc6_poll_out(struct device *dev, unsigned char c)
|
|
{
|
|
const struct cypress_psoc6_config *config = dev->config->config_info;
|
|
|
|
while (Cy_SCB_UART_Put(config->base, (uint32_t)c) != 1UL) {
|
|
}
|
|
}
|
|
|
|
static const struct uart_driver_api uart_psoc6_driver_api = {
|
|
.poll_in = uart_psoc6_poll_in,
|
|
.poll_out = uart_psoc6_poll_out,
|
|
};
|
|
|
|
#ifdef CONFIG_UART_PSOC6_UART_5
|
|
static const struct cypress_psoc6_config cypress_psoc6_uart5_config = {
|
|
.base = DT_UART_PSOC6_UART_5_BASE_ADDRESS,
|
|
.port = DT_UART_PSOC6_UART_5_PORT,
|
|
.rx_num = DT_UART_PSOC6_UART_5_RX_NUM,
|
|
.tx_num = DT_UART_PSOC6_UART_5_TX_NUM,
|
|
.rx_val = DT_UART_PSOC6_UART_5_RX_VAL,
|
|
.tx_val = DT_UART_PSOC6_UART_5_TX_VAL,
|
|
.scb_clock = DT_UART_PSOC6_UART_5_CLOCK,
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(uart_5, DT_UART_PSOC6_UART_5_NAME,
|
|
uart_psoc6_init, NULL,
|
|
&cypress_psoc6_uart5_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
(void *)&uart_psoc6_driver_api);
|
|
#endif /* CONFIG_UART_PSOC6_UART_5 */
|
|
|
|
#ifdef CONFIG_UART_PSOC6_UART_6
|
|
static const struct cypress_psoc6_config cypress_psoc6_uart6_config = {
|
|
.base = DT_UART_PSOC6_UART_6_BASE_ADDRESS,
|
|
.port = DT_UART_PSOC6_UART_6_PORT,
|
|
.rx_num = DT_UART_PSOC6_UART_6_RX_NUM,
|
|
.tx_num = DT_UART_PSOC6_UART_6_TX_NUM,
|
|
.rx_val = DT_UART_PSOC6_UART_6_RX_VAL,
|
|
.tx_val = DT_UART_PSOC6_UART_6_TX_VAL,
|
|
.scb_clock = DT_UART_PSOC6_UART_6_CLOCK,
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(uart_6, DT_UART_PSOC6_UART_6_NAME,
|
|
uart_psoc6_init, NULL,
|
|
&cypress_psoc6_uart6_config,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
(void *)&uart_psoc6_driver_api);
|
|
#endif /* CONFIG_UART_PSOC6_UART_6 */
|