366 lines
9.4 KiB
C
366 lines
9.4 KiB
C
/*
|
|
* Copyright (c) 2017, Linaro Ltd
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
/* See www.ti.com/lit/pdf/slau356f, Chapter 22, for MSP432P4XX UART info. */
|
|
|
|
/* include driverlib/gpio.h (from the msp432p4xx SDK) before Z's uart.h so
|
|
* that the definition of BIT is not overridden */
|
|
#include <driverlib/gpio.h>
|
|
|
|
#include <uart.h>
|
|
|
|
/* Driverlib includes */
|
|
#include <driverlib/rom.h>
|
|
#include <driverlib/rom_map.h>
|
|
#include <driverlib/uart.h>
|
|
|
|
struct uart_msp432p4xx_dev_data_t {
|
|
/* UART config structure */
|
|
eUSCI_UART_Config uartConfig;
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
uart_irq_callback_user_data_t cb; /**< Callback function pointer */
|
|
void *cb_data; /**< Callback function arg */
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
};
|
|
|
|
#define DEV_CFG(dev) \
|
|
((const struct uart_device_config * const)(dev)->config->config_info)
|
|
#define DEV_DATA(dev) \
|
|
((struct uart_msp432p4xx_dev_data_t * const)(dev)->driver_data)
|
|
|
|
static struct device DEVICE_NAME_GET(uart_msp432p4xx_0);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static void uart_msp432p4xx_isr(void *arg);
|
|
#endif
|
|
|
|
static const struct uart_device_config uart_msp432p4xx_dev_cfg_0 = {
|
|
.base = (void *)DT_UART_MSP432P4XX_BASE_ADDRESS,
|
|
.sys_clk_freq = CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC,
|
|
};
|
|
|
|
static struct uart_msp432p4xx_dev_data_t uart_msp432p4xx_dev_data_0 = {
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.cb = NULL,
|
|
#endif
|
|
};
|
|
|
|
static int baudrate_set(eUSCI_UART_Config *config, uint32_t baudrate)
|
|
{
|
|
u16_t prescalar;
|
|
u8_t first_mod_reg, second_mod_reg;
|
|
|
|
switch (baudrate) {
|
|
case 1200:
|
|
prescalar = 2500U;
|
|
first_mod_reg = 0U;
|
|
second_mod_reg = 0U;
|
|
break;
|
|
case 2400:
|
|
prescalar = 1250U;
|
|
first_mod_reg = 0U;
|
|
second_mod_reg = 0U;
|
|
break;
|
|
case 4800:
|
|
prescalar = 625U;
|
|
first_mod_reg = 0U;
|
|
second_mod_reg = 0U;
|
|
break;
|
|
case 9600:
|
|
prescalar = 312U;
|
|
first_mod_reg = 8U;
|
|
second_mod_reg = 0U;
|
|
break;
|
|
case 19200:
|
|
prescalar = 156U;
|
|
first_mod_reg = 4U;
|
|
second_mod_reg = 0U;
|
|
break;
|
|
case 38400:
|
|
prescalar = 78U;
|
|
first_mod_reg = 2U;
|
|
second_mod_reg = 0U;
|
|
break;
|
|
case 57600:
|
|
prescalar = 52U;
|
|
first_mod_reg = 1U;
|
|
second_mod_reg = 37U;
|
|
break;
|
|
case 115200:
|
|
prescalar = 26U;
|
|
first_mod_reg = 0U;
|
|
second_mod_reg = 111U;
|
|
break;
|
|
case 230400:
|
|
prescalar = 13U;
|
|
first_mod_reg = 0U;
|
|
second_mod_reg = 37U;
|
|
break;
|
|
case 460800:
|
|
prescalar = 6U;
|
|
first_mod_reg = 8U;
|
|
second_mod_reg = 32U;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
config->clockPrescalar = prescalar;
|
|
config->firstModReg = first_mod_reg;
|
|
config->secondModReg = second_mod_reg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uart_msp432p4xx_init(struct device *dev)
|
|
{
|
|
int err;
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
eUSCI_UART_Config UartConfig;
|
|
|
|
/* Select P1.2 and P1.3 in UART mode */
|
|
MAP_GPIO_setAsPeripheralModuleFunctionInputPin(GPIO_PORT_P1,
|
|
(GPIO_PIN2 | GPIO_PIN3), GPIO_PRIMARY_MODULE_FUNCTION);
|
|
|
|
UartConfig.selectClockSource = EUSCI_A_UART_CLOCKSOURCE_SMCLK;
|
|
UartConfig.parity = EUSCI_A_UART_NO_PARITY;
|
|
UartConfig.msborLsbFirst = EUSCI_A_UART_LSB_FIRST;
|
|
UartConfig.numberofStopBits = EUSCI_A_UART_ONE_STOP_BIT;
|
|
UartConfig.uartMode = EUSCI_A_UART_MODE;
|
|
UartConfig.overSampling = EUSCI_A_UART_OVERSAMPLING_BAUDRATE_GENERATION;
|
|
|
|
/* Baud rate settings calculated for 48MHz */
|
|
err = baudrate_set(&UartConfig, DT_UART_MSP432P4XX_BAUD_RATE);
|
|
if (err) {
|
|
return err;
|
|
}
|
|
/* Configure UART Module */
|
|
MAP_UART_initModule((unsigned long)config->base, &UartConfig);
|
|
|
|
/* Enable UART module */
|
|
MAP_UART_enableModule((unsigned long)config->base);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
IRQ_CONNECT(DT_TI_MSP432P4XX_UART_40001000_IRQ_0,
|
|
DT_TI_MSP432P4XX_UART_40001000_IRQ_0_PRIORITY,
|
|
uart_msp432p4xx_isr, DEVICE_GET(uart_msp432p4xx_0),
|
|
0);
|
|
irq_enable(DT_TI_MSP432P4XX_UART_40001000_IRQ_0);
|
|
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int uart_msp432p4xx_poll_in(struct device *dev, unsigned char *c)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
|
|
*c = MAP_UART_receiveData((unsigned long)config->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uart_msp432p4xx_poll_out(struct device *dev,
|
|
unsigned char c)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
|
|
MAP_UART_transmitData((unsigned long)config->base, c);
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static int uart_msp432p4xx_fifo_fill(struct device *dev,
|
|
const u8_t *tx_data, int size)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
unsigned int num_tx = 0U;
|
|
|
|
while ((size - num_tx) > 0) {
|
|
MAP_UART_transmitData((unsigned long)config->base,
|
|
tx_data[num_tx]);
|
|
if (MAP_UART_getInterruptStatus((unsigned long)config->base,
|
|
EUSCI_A_UART_TRANSMIT_COMPLETE_INTERRUPT_FLAG)) {
|
|
num_tx++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (int)num_tx;
|
|
}
|
|
|
|
static int uart_msp432p4xx_fifo_read(struct device *dev, u8_t *rx_data,
|
|
const int size)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
unsigned int num_rx = 0U;
|
|
|
|
while (((size - num_rx) > 0) &&
|
|
MAP_UART_getInterruptStatus((unsigned long)config->base,
|
|
EUSCI_A_UART_RECEIVE_INTERRUPT_FLAG)) {
|
|
|
|
rx_data[num_rx++] =
|
|
MAP_UART_receiveData((unsigned long)config->base);
|
|
}
|
|
|
|
return num_rx;
|
|
}
|
|
|
|
static void uart_msp432p4xx_irq_tx_enable(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
|
|
MAP_UART_enableInterrupt((unsigned long)config->base,
|
|
EUSCI_A_UART_TRANSMIT_INTERRUPT);
|
|
}
|
|
|
|
static void uart_msp432p4xx_irq_tx_disable(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
|
|
MAP_UART_disableInterrupt((unsigned long)config->base,
|
|
EUSCI_A_UART_TRANSMIT_INTERRUPT);
|
|
}
|
|
|
|
static int uart_msp432p4xx_irq_tx_ready(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
unsigned int int_status;
|
|
|
|
int_status = MAP_UART_getInterruptStatus((unsigned long)config->base,
|
|
EUSCI_A_UART_TRANSMIT_INTERRUPT_FLAG);
|
|
|
|
return (int_status & EUSCI_A_IE_TXIE);
|
|
}
|
|
|
|
static void uart_msp432p4xx_irq_rx_enable(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
|
|
MAP_UART_enableInterrupt((unsigned long)config->base,
|
|
EUSCI_A_UART_RECEIVE_INTERRUPT);
|
|
}
|
|
|
|
static void uart_msp432p4xx_irq_rx_disable(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
|
|
MAP_UART_disableInterrupt((unsigned long)config->base,
|
|
EUSCI_A_UART_RECEIVE_INTERRUPT);
|
|
}
|
|
|
|
static int uart_msp432p4xx_irq_tx_complete(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
|
|
return MAP_UART_getInterruptStatus((unsigned long)config->base,
|
|
EUSCI_A_UART_TRANSMIT_COMPLETE_INTERRUPT_FLAG);
|
|
}
|
|
|
|
static int uart_msp432p4xx_irq_rx_ready(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
unsigned int int_status;
|
|
|
|
int_status = MAP_UART_getInterruptStatus((unsigned long)config->base,
|
|
EUSCI_A_UART_RECEIVE_INTERRUPT_FLAG);
|
|
|
|
return (int_status & EUSCI_A_IE_RXIE);
|
|
}
|
|
|
|
static void uart_msp432p4xx_irq_err_enable(struct device *dev)
|
|
{
|
|
/* Not yet used in zephyr */
|
|
}
|
|
|
|
static void uart_msp432p4xx_irq_err_disable(struct device *dev)
|
|
{
|
|
/* Not yet used in zephyr */
|
|
}
|
|
|
|
static int uart_msp432p4xx_irq_is_pending(struct device *dev)
|
|
{
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
unsigned int int_status;
|
|
|
|
int_status = MAP_UART_getEnabledInterruptStatus(
|
|
(unsigned long)config->base);
|
|
|
|
return (int_status & (EUSCI_A_IE_TXIE | EUSCI_A_IE_RXIE));
|
|
}
|
|
|
|
static int uart_msp432p4xx_irq_update(struct device *dev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static void uart_msp432p4xx_irq_callback_set(struct device *dev,
|
|
uart_irq_callback_user_data_t cb,
|
|
void *cb_data)
|
|
{
|
|
struct uart_msp432p4xx_dev_data_t * const dev_data = DEV_DATA(dev);
|
|
|
|
dev_data->cb = cb;
|
|
dev_data->cb_data = cb_data;
|
|
}
|
|
|
|
/**
|
|
* @brief Interrupt service routine.
|
|
*
|
|
* This simply calls the callback function, if one exists.
|
|
*
|
|
* @param arg Argument to ISR.
|
|
*
|
|
* @return N/A
|
|
*/
|
|
static void uart_msp432p4xx_isr(void *arg)
|
|
{
|
|
struct device *dev = arg;
|
|
const struct uart_device_config *config = DEV_CFG(dev);
|
|
struct uart_msp432p4xx_dev_data_t * const dev_data = DEV_DATA(dev);
|
|
unsigned int int_status;
|
|
|
|
int_status = MAP_UART_getEnabledInterruptStatus(
|
|
(unsigned long)config->base);
|
|
|
|
if (dev_data->cb) {
|
|
dev_data->cb(dev_data->cb_data);
|
|
}
|
|
/*
|
|
* Clear interrupts only after cb called, as Zephyr UART clients expect
|
|
* to check interrupt status during the callback.
|
|
*/
|
|
MAP_UART_disableInterrupt((unsigned long)config->base, int_status);
|
|
}
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
static const struct uart_driver_api uart_msp432p4xx_driver_api = {
|
|
.poll_in = uart_msp432p4xx_poll_in,
|
|
.poll_out = uart_msp432p4xx_poll_out,
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.fifo_fill = uart_msp432p4xx_fifo_fill,
|
|
.fifo_read = uart_msp432p4xx_fifo_read,
|
|
.irq_tx_enable = uart_msp432p4xx_irq_tx_enable,
|
|
.irq_tx_disable = uart_msp432p4xx_irq_tx_disable,
|
|
.irq_tx_ready = uart_msp432p4xx_irq_tx_ready,
|
|
.irq_rx_enable = uart_msp432p4xx_irq_rx_enable,
|
|
.irq_rx_disable = uart_msp432p4xx_irq_rx_disable,
|
|
.irq_tx_complete = uart_msp432p4xx_irq_tx_complete,
|
|
.irq_rx_ready = uart_msp432p4xx_irq_rx_ready,
|
|
.irq_err_enable = uart_msp432p4xx_irq_err_enable,
|
|
.irq_err_disable = uart_msp432p4xx_irq_err_disable,
|
|
.irq_is_pending = uart_msp432p4xx_irq_is_pending,
|
|
.irq_update = uart_msp432p4xx_irq_update,
|
|
.irq_callback_set = uart_msp432p4xx_irq_callback_set,
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(uart_msp432p4xx_0, DT_UART_MSP432P4XX_NAME,
|
|
uart_msp432p4xx_init, &uart_msp432p4xx_dev_data_0,
|
|
&uart_msp432p4xx_dev_cfg_0,
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
(void *)&uart_msp432p4xx_driver_api);
|