zephyr/dts/arm/st/l4/stm32l451.dtsi

181 lines
4.2 KiB
Plaintext

/*
* Copyright (c) 2023 SILA Embedded Solutions GmbH
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <st/l4/stm32l4.dtsi>
/ {
soc {
compatible = "st,stm32l451", "st,stm32l4", "simple-bus";
clocks {
clk_hsi48: clk-hsi48 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <DT_FREQ_M(48)>;
status = "disabled";
};
};
pinctrl: pin-controller@48000000 {
gpiod: gpio@48000c00 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48000c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000008>;
};
gpioe: gpio@48001000 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48001000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000010>;
};
};
rng: rng@50060800 {
clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00040000>,
<&rcc STM32_SRC_HSI48 CLK48_SEL(0)>;
};
i2c2: i2c@40005800 {
compatible = "st,stm32-i2c-v2";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40005800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00400000>;
interrupts = <33 0>, <34 0>;
interrupt-names = "event", "error";
status = "disabled";
};
i2c4: i2c@40008400 {
compatible = "st,stm32-i2c-v2";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40008400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1_2 0x00000002>;
interrupts = <83 0>, <84 0>;
interrupt-names = "event", "error";
status = "disabled";
};
spi2: spi@40003800 {
compatible = "st,stm32-spi-fifo", "st,stm32-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40003800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00004000>;
interrupts = <36 5>;
status = "disabled";
};
spi3: spi@40003c00 {
compatible = "st,stm32-spi-fifo", "st,stm32-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40003c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00008000>;
interrupts = <51 5>;
status = "disabled";
};
usart3: serial@40004800 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>;
resets = <&rctl STM32_RESET(APB1L, 18U)>;
interrupts = <39 0>;
status = "disabled";
};
uart4: serial@40004c00 {
compatible = "st,stm32-uart";
reg = <0x40004c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>;
resets = <&rctl STM32_RESET(APB1L, 19U)>;
interrupts = <52 0>;
status = "disabled";
};
timers3: timers@40000400 {
compatible = "st,stm32-timers";
reg = <0x40000400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000002>;
resets = <&rctl STM32_RESET(APB1L, 1U)>;
interrupts = <29 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
counter {
compatible = "st,stm32-counter";
status = "disabled";
};
};
dac1: dac@40007400 {
compatible = "st,stm32-dac";
reg = <0x40007400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x20000000>;
status = "disabled";
#io-channel-cells = <1>;
};
can1: can@40006400 {
compatible = "st,stm32-bxcan";
reg = <0x40006400 0x400>;
interrupts = <19 0>, <20 0>, <21 0>, <22 0>;
interrupt-names = "TX", "RX0", "RX1", "SCE";
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x02000000>; //RCC_APB1ENR1_CAN1EN
status = "disabled";
};
sdmmc1: sdmmc@40012800 {
compatible = "st,stm32-sdmmc";
reg = <0x40012800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000400>,
<&rcc STM32_SRC_HSI48 CLK48_SEL(0)>;
resets = <&rctl STM32_RESET(APB2, 10U)>;
interrupts = <49 0>;
status = "disabled";
};
rtc@40002800 {
bbram: backup_regs {
compatible = "st,stm32-bbram";
st,backup-regs = <32>;
status = "disabled";
};
};
};
smbus2: smbus2 {
compatible = "st,stm32-smbus";
#address-cells = <1>;
#size-cells = <0>;
i2c = <&i2c2>;
status = "disabled";
};
smbus4: smbus4 {
compatible = "st,stm32-smbus";
#address-cells = <1>;
#size-cells = <0>;
i2c = <&i2c4>;
status = "disabled";
};
};