157 lines
3.7 KiB
C
157 lines
3.7 KiB
C
/*
|
|
* Copyright (c) 2017 Linaro Ltd.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT arm_versatile_i2c
|
|
|
|
/**
|
|
* @file
|
|
* @brief Driver for ARM's SBCon 2-wire serial bus interface
|
|
*
|
|
* SBCon is a simple device which allows directly setting and getting the
|
|
* hardware state of two-bit serial interfaces like I2C.
|
|
*/
|
|
|
|
#include <zephyr/device.h>
|
|
#include <errno.h>
|
|
#include <zephyr/drivers/i2c.h>
|
|
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(i2c_sbcon, CONFIG_I2C_LOG_LEVEL);
|
|
|
|
#include "i2c-priv.h"
|
|
#include "i2c_bitbang.h"
|
|
|
|
/* SBCon hardware registers layout */
|
|
struct sbcon {
|
|
union {
|
|
volatile uint32_t SB_CONTROLS; /* Write to set pins high */
|
|
volatile uint32_t SB_CONTROL; /* Read for state of pins */
|
|
};
|
|
volatile uint32_t SB_CONTROLC; /* Write to set pins low */
|
|
};
|
|
|
|
/* Bits values for SCL and SDA lines in struct sbcon registers */
|
|
#define SCL BIT(0)
|
|
#define SDA BIT(1)
|
|
|
|
/* Driver config */
|
|
struct i2c_sbcon_config {
|
|
struct sbcon *sbcon; /* Address of hardware registers */
|
|
uint32_t bitrate; /* I2C bus speed in Hz */
|
|
};
|
|
|
|
/* Driver instance data */
|
|
struct i2c_sbcon_context {
|
|
struct i2c_bitbang bitbang; /* Bit-bang library data */
|
|
};
|
|
|
|
static void i2c_sbcon_set_scl(void *io_context, int state)
|
|
{
|
|
struct sbcon *sbcon = io_context;
|
|
|
|
if (state) {
|
|
sbcon->SB_CONTROLS = SCL;
|
|
} else {
|
|
sbcon->SB_CONTROLC = SCL;
|
|
}
|
|
}
|
|
|
|
static void i2c_sbcon_set_sda(void *io_context, int state)
|
|
{
|
|
struct sbcon *sbcon = io_context;
|
|
|
|
if (state) {
|
|
sbcon->SB_CONTROLS = SDA;
|
|
} else {
|
|
sbcon->SB_CONTROLC = SDA;
|
|
}
|
|
}
|
|
|
|
static int i2c_sbcon_get_sda(void *io_context)
|
|
{
|
|
struct sbcon *sbcon = io_context;
|
|
|
|
return sbcon->SB_CONTROL & SDA;
|
|
}
|
|
|
|
static const struct i2c_bitbang_io io_fns = {
|
|
.set_scl = &i2c_sbcon_set_scl,
|
|
.set_sda = &i2c_sbcon_set_sda,
|
|
.get_sda = &i2c_sbcon_get_sda,
|
|
};
|
|
|
|
static int i2c_sbcon_configure(const struct device *dev, uint32_t dev_config)
|
|
{
|
|
struct i2c_sbcon_context *context = dev->data;
|
|
|
|
return i2c_bitbang_configure(&context->bitbang, dev_config);
|
|
}
|
|
|
|
static int i2c_sbcon_get_config(const struct device *dev, uint32_t *config)
|
|
{
|
|
struct i2c_sbcon_context *context = dev->data;
|
|
|
|
return i2c_bitbang_get_config(&context->bitbang, config);
|
|
}
|
|
|
|
static int i2c_sbcon_transfer(const struct device *dev, struct i2c_msg *msgs,
|
|
uint8_t num_msgs, uint16_t slave_address)
|
|
{
|
|
struct i2c_sbcon_context *context = dev->data;
|
|
|
|
return i2c_bitbang_transfer(&context->bitbang, msgs, num_msgs,
|
|
slave_address);
|
|
}
|
|
|
|
static int i2c_sbcon_recover_bus(const struct device *dev)
|
|
{
|
|
struct i2c_sbcon_context *context = dev->data;
|
|
|
|
return i2c_bitbang_recover_bus(&context->bitbang);
|
|
}
|
|
|
|
static const struct i2c_driver_api api = {
|
|
.configure = i2c_sbcon_configure,
|
|
.get_config = i2c_sbcon_get_config,
|
|
.transfer = i2c_sbcon_transfer,
|
|
.recover_bus = i2c_sbcon_recover_bus,
|
|
};
|
|
|
|
static int i2c_sbcon_init(const struct device *dev)
|
|
{
|
|
struct i2c_sbcon_context *context = dev->data;
|
|
const struct i2c_sbcon_config *config = dev->config;
|
|
int ret;
|
|
|
|
i2c_bitbang_init(&context->bitbang, &io_fns, config->sbcon);
|
|
|
|
ret = i2c_bitbang_configure(&context->bitbang,
|
|
I2C_MODE_CONTROLLER | i2c_map_dt_bitrate(config->bitrate));
|
|
if (ret != 0) {
|
|
LOG_ERR("failed to configure I2C bitbang: %d", ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define DEFINE_I2C_SBCON(_num) \
|
|
\
|
|
static struct i2c_sbcon_context i2c_sbcon_dev_data_##_num; \
|
|
\
|
|
static const struct i2c_sbcon_config i2c_sbcon_dev_cfg_##_num = { \
|
|
.sbcon = (void *)DT_INST_REG_ADDR(_num), \
|
|
.bitrate = DT_INST_PROP(_num, clock_frequency), \
|
|
}; \
|
|
\
|
|
I2C_DEVICE_DT_INST_DEFINE(_num, \
|
|
i2c_sbcon_init, \
|
|
NULL, \
|
|
&i2c_sbcon_dev_data_##_num, \
|
|
&i2c_sbcon_dev_cfg_##_num, \
|
|
PRE_KERNEL_2, CONFIG_I2C_INIT_PRIORITY, &api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(DEFINE_I2C_SBCON)
|