72 lines
1.7 KiB
ReStructuredText
72 lines
1.7 KiB
ReStructuredText
.. _npm1300_ek_sample:
|
|
|
|
nPM1300 EK sample
|
|
#################
|
|
|
|
Overview
|
|
********
|
|
|
|
This sample is provided for evaluation of the :ref:`npm1300_ek`.
|
|
The sample provides a shell interface to support the features of the
|
|
nPM1300 PMIC, including:
|
|
|
|
- Regulators (BUCK1/2, LDO1/2)
|
|
- GPIO
|
|
|
|
Requirements
|
|
************
|
|
|
|
The shield needs to be wired to a host board supporting the Arduino connector.
|
|
|
|
Examples and images to follow
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
The sample is designed so that it can run on any platform. For example, when
|
|
building for the nRF52 DK, the following command can be used:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/shields/npm1300_ek
|
|
:board: nrf52dk/nrf52832
|
|
:goals: build
|
|
:compact:
|
|
|
|
Note that this sample automatically sets ``SHIELD`` to ``npm1300_ek``. Once
|
|
flashed, you should boot into the shell interface. The ``regulator`` command is
|
|
provided to test the PMIC. Below you can find details for each subcommand.
|
|
|
|
Regulators
|
|
==========
|
|
|
|
The ``regulator`` shell interface provides several subcommand to test
|
|
the regulators embedded in the PMIC. Below you can find some command examples.
|
|
|
|
.. code-block:: bash
|
|
|
|
# list all the supported voltages by BUCK1
|
|
regulator vlist BUCK1
|
|
1.000 V
|
|
1.100 V
|
|
...
|
|
|
|
.. code-block:: bash
|
|
|
|
# enable BUCK2
|
|
regulator enable BUCK2
|
|
# disable BUCK2
|
|
regulator disable BUCK2
|
|
|
|
.. code-block:: bash
|
|
|
|
# set BUCK2 voltage to exactly 2V
|
|
regulator vset BUCK2 2V
|
|
# obtain the actual BUCK1 configured voltage
|
|
regulator vget BUCK1
|
|
1.800 V
|
|
# set BUCK1 voltage to a value between 2.35V and 2.45V
|
|
regulator set BUCK1 2.35V 2.45V
|
|
# obtain the actual BUCK1 configured voltage
|
|
regulator get BUCK1
|
|
2.400 V
|