Jakub Rzeszutko 197740bdfe drivers: uart: nrf: fixing interrupt driven API ... 1. API function: uart_nrfx_irq_tx_enable is expected to enable and trigger TXDRDY interrupt. Due to HW limiation before first byte has been sent TXDRDY interrupt will not be triggered so it must be forced by the software. 2. Common function: uart_nrfx_irq_tx_ready_complete is used for two API entries: irq_tx_ready, irq_tx_complete because Nordic hardware does not distinguish between them. This function returns 1 when driver is ready to accept data and 0 otherwise. 3. Removed Hungarian prefixes. Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>		2018-07-02 10:56:57 +02:00
..
CMakeLists.txt	riscv32: riscv-privilege: Microsemi Mi-V support	2018-06-20 11:57:07 -04:00
Kconfig	riscv32: riscv-privilege: Microsemi Mi-V support	2018-06-20 11:57:07 -04:00
Kconfig.altera_jtag	…
Kconfig.cc32xx	…
Kconfig.cmsdk_apb	…
Kconfig.esp32	…
Kconfig.fe310	…
Kconfig.gecko	…
Kconfig.imx	serial: Add imx uart driver shim	2018-04-11 08:27:05 +02:00
Kconfig.mcux	…
Kconfig.mcux_lpc_usart	…
Kconfig.mcux_lpsci	…
Kconfig.mcux_lpuart	…
Kconfig.miv	riscv32: riscv-privilege: Microsemi Mi-V support	2018-06-20 11:57:07 -04:00
Kconfig.msp432p4xx	…
Kconfig.nrfx	drivers: serial: simplify Kconfig.nrfx by using HAS_HW_NRF_UART0	2018-06-19 20:02:51 +02:00
Kconfig.ns16550	drivers/serial: Add port 2 instance in ns16550 driver	2018-05-18 20:18:50 +03:00
Kconfig.nsim	serial: nsim: Fix impossible-to-enable CONFIG_UART_NSIM	2018-05-24 13:09:28 -04:00
Kconfig.qmsi	drivers/uart: Use dts to set uart priorities for QMSI driver	2018-05-18 20:18:50 +03:00
Kconfig.riscv_qemu	…
Kconfig.sam0	…
Kconfig.stellaris	…
Kconfig.stm32	drivers: serial: stm32: add LPUART support for L0/L4 series	2018-05-25 11:54:42 -05:00
Kconfig.uart_sam	serial: sam: add support for interrupt driven serial	2018-02-21 11:26:20 -06:00
Kconfig.usart_sam	driver: usart: Added support for interrupt driver USART on SAM E70.	2018-03-10 11:42:25 -06:00
uart_altera_jtag_hal.c	…
uart_cc32xx.c	…
uart_cmsdk_apb.c	…
uart_esp32.c	…
uart_fe310.c	drivers: serial: uart_fe310: Match Kconfig defines in comment	2018-05-25 08:04:16 -05:00
uart_gecko.c	…
uart_handlers.c	drivers: serial: Fix syntax error	2018-06-29 10:18:48 +02:00
uart_imx.c	serial: Add imx uart driver shim	2018-04-11 08:27:05 +02:00
uart_mcux.c	…
uart_mcux_lpsci.c	…
uart_mcux_lpuart.c	…
uart_miv.c	riscv32: riscv-privilege: Microsemi Mi-V support	2018-06-20 11:57:07 -04:00
uart_msp432p4xx.c	…
uart_nrfx_uart.c	drivers: uart: nrf: fixing interrupt driven API	2018-07-02 10:56:57 +02:00
uart_ns16550.c	dts: xtensa: Fix build error due to dts changes for ns16550 driver.	2018-05-22 08:51:59 -04:00
uart_ns16550.h	…
uart_nsim.c	…
uart_qmsi.c	drivers/uart: Use dts to set uart priorities for QMSI driver	2018-05-18 20:18:50 +03:00
uart_riscv_qemu.c	…
uart_sam.c	serial: sam: add support for interrupt driven serial	2018-02-21 11:26:20 -06:00
uart_sam0.c	…
uart_stellaris.c	…
uart_stm32.c	drivers/serial: stm32: Put LPUART code under LPUART Kconfig symbol	2018-06-18 15:21:54 -04:00
uart_stm32.h	drivers: serial: stm32: remove HAL driver legacy	2018-05-25 11:54:42 -05:00
usart_mcux_lpc.c	ext: mcux: Reorganize imported drivers into soc family subfolders	2018-04-24 07:55:48 -05:00
usart_sam.c	driver: usart: Added support for interrupt driver USART on SAM E70.	2018-03-10 11:42:25 -06:00