zephyr

History

Michal Smola a44e3e146d samples: pwm: Add overlay for frdm_mcxc242 board Add Devicetree overlay for samples basic/blinky_pwm and drivers/led/pwm for frdm_mcxc242 board to set appropriate tpm clock source and to enable pwmleds. Signed-off-by: Michal Smola <michal.smola@nxp.com>		2024-09-19 18:27:11 +01:00
..
boards	…
src	…
CMakeLists.txt	…
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. zephyr:code-sample:: led-pwm
   :name: LED PWM
   :relevant-api: led_interface

   Control PWM LEDs using the LED API.

Overview
********

This sample allows to test the led-pwm driver. The first "pwm-leds" compatible
device instance found in DT is used. For each LEDs attached to this device
(child nodes) the same test pattern (described below) is executed. The LED API
functions are used to control the LEDs.

Test pattern
============

For each PWM LEDs (one after the other):

- Turning on
- Turning off
- Increasing brightness gradually
- Blinking on: 0.1 sec, off: 0.1 sec
- Blinking on: 1 sec, off: 1 sec
- Turning off

Building and Running
********************

This sample can be built and executed on all the boards with PWM LEDs connected.
The LEDs must be correctly described in the DTS: the compatible property of the
device node must match "pwm-leds". And for each LED, a child node must be
defined and the PWM configuration must be provided through a "pwms" phandle's
node.