zephyr/dts/arm/nxp/nxp_kw41z.dtsi

259 lines
5.4 KiB
Plaintext

/*
* Copyright 2020 NXP
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <mem.h>
#include <arm/armv6-m.dtsi>
#include <dt-bindings/clock/kinetis_sim.h>
#include <dt-bindings/clock/kinetis_mcg.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/i2c/i2c.h>
/ {
chosen {
zephyr,entropy = &trng;
zephyr,flash-controller = &ftfa;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-m0+";
reg = <0>;
};
};
sram0: memory@20000000 {
compatible = "mmio-sram";
reg = <0x20000000 DT_SIZE_K(128)>;
};
soc {
mcg: clock-controller@40064000 {
compatible = "nxp,kinetis-mcg";
reg = <0x40064000 0x13>;
label = "MCG";
#clock-cells = <1>;
};
osc: clock-controller@40065000 {
compatible = "nxp,kw41z-osc";
reg = <0x40065000 0x4>;
enable-external-reference;
};
rtc: rtc@4003d000 {
compatible = "nxp,kinetis-rtc";
reg = <0x4003d000 0x20>;
interrupts = <20 0>;
clock-frequency = <32768>;
label = "RTC_0";
prescaler = <32768>;
};
sim: sim@40047000 {
compatible = "nxp,kinetis-sim";
reg = <0x40047000 0x1060>;
label = "SIM";
#clock-cells = <3>;
core_clk {
compatible = "fixed-factor-clock";
clocks = <&mcg KINETIS_MCG_OUT_CLK>;
clock-div = <1>;
#clock-cells = <0>;
};
flash_clk {
compatible = "fixed-factor-clock";
clocks = <&mcg KINETIS_MCG_OUT_CLK>;
clock-div = <2>;
#clock-cells = <0>;
};
};
ftfa: flash-controller@40020000 {
compatible = "nxp,kinetis-ftfa";
label = "FLASH_CTRL";
reg = <0x40020000 0x2c>;
interrupts = <5 0>;
#address-cells = <1>;
#size-cells = <1>;
flash0: flash@0 {
compatible = "soc-nv-flash";
label = "MCUX_FLASH";
reg = <0 DT_SIZE_K(512)>;
erase-block-size = <2048>;
write-block-size = <4>;
};
};
i2c0: i2c@40066000 {
compatible = "nxp,kinetis-i2c";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40066000 0x1000>;
interrupts = <8 0>;
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 6>;
label = "I2C_0";
status = "disabled";
};
i2c1: i2c@40067000 {
compatible = "nxp,kinetis-i2c";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40067000 0x1000>;
interrupts = <9 0>;
clocks = <&sim KINETIS_SIM_CORESYS_CLK 0x1034 7>;
label = "I2C_1";
status = "disabled";
};
lpuart0: lpuart@40054000 {
compatible = "nxp,kinetis-lpuart";
reg = <0x40054000 0x18>;
interrupts = <12 0>;
clocks = <&sim KINETIS_SIM_CORESYS_CLK 0x1038 20>;
label = "UART_0";
status = "disabled";
};
porta: pinmux@40049000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x40049000 0xa4>;
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 9>;
};
portb: pinmux@4004a000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x4004a000 0xa4>;
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 10>;
};
portc: pinmux@4004b000 {
compatible = "nxp,kinetis-pinmux";
reg = <0x4004b000 0xa4>;
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 11>;
};
gpioa: gpio@400ff000 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff000 0x40>;
interrupts = <30 2>;
label = "GPIO_0";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&porta>;
};
gpiob: gpio@400ff040 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff040 0x40>;
label = "GPIO_1";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&portb>;
};
gpioc: gpio@400ff080 {
compatible = "nxp,kinetis-gpio";
status = "disabled";
reg = <0x400ff080 0x40>;
interrupts = <31 2>;
label = "GPIO_2";
gpio-controller;
#gpio-cells = <2>;
nxp,kinetis-port = <&portc>;
};
spi0: spi@4002c000 {
compatible = "nxp,kinetis-dspi";
reg = <0x4002c000 0x9C>;
interrupts = <10 3>;
label = "SPI_0";
clocks = <&sim KINETIS_SIM_BUS_CLK 0x103C 12>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@4002d000 {
compatible = "nxp,kinetis-dspi";
reg = <0x4002d000 0x9C>;
interrupts = <29 3>;
label = "SPI_1";
clocks = <&sim KINETIS_SIM_BUS_CLK 0x103C 13>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
tpm0: pwm@40038000 {
compatible = "nxp,kinetis-tpm";
reg = <0x40038000 0x88>;
interrupts = <0x84 0>;
/* channel information needed - fixme */
label = "PWM_0";
clocks = <&sim KINETIS_SIM_BUS_CLK 0x103C 24>;
status = "disabled";
#pwm-cells = <3>;
};
tpm1: pwm@40039000 {
compatible = "nxp,kinetis-tpm";
reg = <0x40039000 0x88>;
interrupts = <0x88 0>;
/* channel information needed - fixme */
label = "PWM_1";
clocks = <&sim KINETIS_SIM_BUS_CLK 0x103C 25>;
status = "disabled";
#pwm-cells = <3>;
};
tpm2: pwm@4003a000 {
compatible = "nxp,kinetis-tpm";
reg = <0x4003a000 0x88>;
interrupts = <0x8C 0>;
/* channel information needed - fixme */
label = "PWM_2";
clocks = <&sim KINETIS_SIM_BUS_CLK 0x103C 26>;
status = "disabled";
#pwm-cells = <3>;
};
adc0: adc@4003b000{
compatible = "nxp,kinetis-adc16";
reg = <0x4003b000 0x70>;
interrupts = <15 0>;
label = "ADC_0";
status = "disabled";
#io-channel-cells = <1>;
};
trng: random@40029000 {
compatible = "nxp,kinetis-trng";
reg = <0x40029000 0x1000>;
status = "okay";
interrupts = <13 0>;
label = "TRNG";
};
};
};
&nvic {
arm,num-irq-priority-bits = <2>;
};