248 lines
8.6 KiB
Plaintext
248 lines
8.6 KiB
Plaintext
# Copyright 2020 Espressif Systems (Shanghai) PTE LTD
|
|
|
|
menuconfig WIFI_ESP32
|
|
bool "ESP32 SoC WiFi support"
|
|
default y
|
|
depends on DT_HAS_ESPRESSIF_ESP32_WIFI_ENABLED
|
|
depends on !SMP
|
|
select THREAD_CUSTOM_DATA
|
|
select NET_L2_WIFI_MGMT
|
|
select WIFI_USE_NATIVE_NETWORKING
|
|
select MBEDTLS
|
|
select MBEDTLS_ENTROPY_ENABLED
|
|
select MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
|
|
select MBEDTLS_ECP_ALL_ENABLED
|
|
select MBEDTLS_ECDH_C
|
|
select MBEDTLS_ECDSA_C
|
|
select MBEDTLS_ECP_C
|
|
help
|
|
Enable ESP32 SoC WiFi support. Only supported in single
|
|
core mode because the network stack is not aware of SMP
|
|
stuff.
|
|
|
|
if WIFI_ESP32
|
|
|
|
config ESP32_WIFI_STA_AUTO_DHCPV4
|
|
bool "Automatically starts DHCP4 negotiation"
|
|
depends on NET_DHCPV4
|
|
depends on NET_IPV4
|
|
help
|
|
WiFi driver will automatically initiate DHCPV4 negotiation when connected.
|
|
|
|
config ESP32_WIFI_STA_RECONNECT
|
|
bool "WiFi connection retry"
|
|
help
|
|
Set auto WiFI reconnection when disconnected.
|
|
|
|
config ESP32_WIFI_EVENT_TASK_STACK_SIZE
|
|
int "Event Task Stack Size"
|
|
default 4096
|
|
|
|
config ESP32_WIFI_EVENT_TASK_PRIO
|
|
int "Event Task Priority"
|
|
default 4
|
|
|
|
config ESP32_WIFI_STATIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi static RX buffers"
|
|
range 2 25
|
|
default 10
|
|
help
|
|
Set the number of WiFi static RX buffers. Each buffer takes approximately
|
|
1.6KB of RAM. The static rx buffers are allocated when esp_wifi_init is
|
|
called, they are not freed until esp_wifi_deinit is called.
|
|
|
|
WiFi hardware use these buffers to receive all 802.11 frames. A higher
|
|
number may allow higher throughput but increases memory use.
|
|
If ESP32_WIFI_AMPDU_RX_ENABLED is enabled, this value is recommended to
|
|
set equal or bigger than ESP32_WIFI_RX_BA_WIN in order to achieve better
|
|
throughput and compatibility with both stations and APs.
|
|
|
|
config ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic RX buffers"
|
|
range 0 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic RX buffers, 0 means unlimited RX buffers
|
|
will be allocated (provided sufficient free RAM). The size of each dynamic
|
|
RX buffer depends on the size of the received data frame.
|
|
|
|
For each received data frame, the WiFi driver makes a copy to an RX buffer
|
|
and then delivers it to the high layer TCP/IP stack. The dynamic RX buffer
|
|
is freed after the higher layer has successfully received the data frame.
|
|
|
|
For some applications, WiFi data frames may be received faster than the
|
|
application can process them. In these cases we may run out of memory if
|
|
RX buffer number is unlimited (0). If a dynamic RX buffer limit is set,
|
|
it should be at least the number of static RX buffers.
|
|
|
|
choice ESP32_WIFI_TX_BUFFER
|
|
prompt "Type of WiFi TX buffers"
|
|
default ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
help
|
|
Select type of WiFi TX buffers:
|
|
|
|
If "Static" is selected, WiFi TX buffers are allocated when WiFi is
|
|
initialized and released when WiFi is de-initialized. The size of each
|
|
static TX buffer is fixed to about 1.6KB.
|
|
|
|
If "Dynamic" is selected, each WiFi TX buffer is allocated as needed
|
|
when a data frame is delivered to the Wifi driver from the TCP/IP stack.
|
|
The buffer is freed after the data frame has been sent by the WiFi driver.
|
|
The size of each dynamic TX buffer depends on the length of each data
|
|
frame sent by the TCP/IP layer.
|
|
|
|
If PSRAM is enabled, "Static" should be selected to guarantee enough
|
|
WiFi TX buffers. If PSRAM is disabled, "Dynamic" should be selected
|
|
to improve the utilization of RAM.
|
|
|
|
config ESP32_WIFI_STATIC_TX_BUFFER
|
|
bool "Static"
|
|
config ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
bool "Dynamic"
|
|
endchoice
|
|
|
|
config ESP32_WIFI_TX_BUFFER_TYPE
|
|
int
|
|
default 0 if ESP32_WIFI_STATIC_TX_BUFFER
|
|
default 1 if ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
|
|
config ESP32_WIFI_STATIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi static TX buffers"
|
|
depends on ESP32_WIFI_STATIC_TX_BUFFER
|
|
range 1 64
|
|
default 16
|
|
help
|
|
Set the number of WiFi static TX buffers. Each buffer takes approximately
|
|
1.6KB of RAM. The static RX buffers are allocated when esp_wifi_init() is
|
|
called, they are not released until esp_wifi_deinit() is called.
|
|
|
|
For each transmitted data frame from the higher layer TCP/IP stack,
|
|
the WiFi driver makes a copy of it in a TX buffer. For some applications
|
|
especially UDP applications, the upper layer can deliver frames faster
|
|
than WiFi layer can transmit.
|
|
In these cases, we may run out of TX buffers.
|
|
|
|
config ESP32_WIFI_CACHE_TX_BUFFER_NUM
|
|
int "Max number of WiFi cache TX buffers"
|
|
range 16 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi cache TX buffer number.
|
|
|
|
For each TX packet from uplayer, such as LWIP etc, WiFi driver needs to
|
|
allocate a static TX buffer and makes a copy of uplayer packet. If WiFi
|
|
driver fails to allocate the static TX buffer, it caches the uplayer
|
|
packets to a dedicated buffer queue, this option is used to configure the
|
|
size of the cached TX queue.
|
|
|
|
config ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic TX buffers"
|
|
depends on ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
range 1 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic TX buffers. The size of each
|
|
dynamic TXbuffer is not fixed, it depends on the size of each
|
|
transmitted data frame.
|
|
|
|
For each transmitted frame from the higher layer TCP/IP stack,
|
|
the WiFi driver makes a copy of it in a TX buffer. For some applications,
|
|
especially UDP applications, the upper layer can deliver frames faster
|
|
than WiFi layer can transmit. In these cases, we may run out of TX
|
|
buffers.
|
|
|
|
config ESP32_WIFI_CSI_ENABLED
|
|
bool "WiFi CSI(Channel State Information)"
|
|
help
|
|
Select this option to enable CSI(Channel State Information) feature.
|
|
CSI takes about CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM KB of RAM.
|
|
If CSI is not used, it is better to disable this feature in order
|
|
to save memory.
|
|
|
|
config ESP32_WIFI_AMPDU_TX_ENABLED
|
|
bool "WiFi AMPDU TX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU TX feature. It improves transmission
|
|
error checking and overall network performance with the cost of processing
|
|
speed. Helpful when the device is operating in crowded wireless area.
|
|
|
|
config ESP32_WIFI_TX_BA_WIN
|
|
int "WiFi AMPDU TX BA window size"
|
|
depends on ESP32_WIFI_AMPDU_TX_ENABLED
|
|
range 2 32
|
|
default 6
|
|
help
|
|
Set the size of WiFi Block Ack TX window. Generally a bigger value means
|
|
higher throughput but more memory. Most of time we should NOT change the
|
|
default value unless special reason, e.g. test the maximum
|
|
UDP TX throughput with iperf etc. For iperf test in shieldbox,
|
|
the recommended value is 9~12.
|
|
|
|
config ESP32_WIFI_AMPDU_RX_ENABLED
|
|
bool "WiFi AMPDU RX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU RX feature. It improves transmission
|
|
error checking and overall network performance with the cost of processing
|
|
speed. Helpful when the device is operating in crowded wireless area.
|
|
|
|
config ESP32_WIFI_RX_BA_WIN
|
|
int "WiFi AMPDU RX BA window size"
|
|
depends on ESP32_WIFI_AMPDU_RX_ENABLED
|
|
range 2 32
|
|
default 6
|
|
help
|
|
Set the size of WiFi Block Ack RX window. Generally a bigger value means
|
|
higher throughput and better compatibility but more memory. Most of time
|
|
we should NOT change the default value unless special reason,
|
|
e.g. test the maximum UDP RX throughput with iperf etc. For iperf test in
|
|
shieldbox, the recommended value is 9~12. If PSRAM is used and WiFi memory
|
|
is preferred to be allocated in PSRAM first, the default and minimum value
|
|
should be 16 to achieve better throughput and compatibility with both
|
|
stations and APs.
|
|
|
|
choice ESP32_WIFI_TASK_CORE_ID
|
|
prompt "WiFi Task Core ID"
|
|
default ESP32_WIFI_TASK_PINNED_TO_CORE_0
|
|
help
|
|
Pinned WiFi task to core 0 (core 1 not supported yet)
|
|
|
|
config ESP32_WIFI_TASK_PINNED_TO_CORE_0
|
|
bool "Core 0"
|
|
endchoice
|
|
|
|
config ESP32_WIFI_SW_COEXIST_ENABLE
|
|
bool
|
|
help
|
|
Software controls WiFi/Bluetooth coexistence. Not supported yet.
|
|
|
|
config ESP32_WIFI_IRAM_OPT
|
|
bool "WiFi IRAM speed optimization"
|
|
help
|
|
Select this option to place frequently called Wi-Fi library functions in IRAM.
|
|
When this option is disabled, more than 10Kbytes of IRAM memory will be saved
|
|
but Wi-Fi throughput will be reduced.
|
|
|
|
config ESP32_WIFI_RX_IRAM_OPT
|
|
bool "WiFi RX IRAM speed optimization"
|
|
help
|
|
Select this option to place frequently called Wi-Fi library RX functions in IRAM.
|
|
When this option is disabled, more than 17Kbytes of IRAM memory will be saved
|
|
but Wi-Fi performance will be reduced.
|
|
|
|
config ESP32_WIFI_NET_ALLOC_SPIRAM
|
|
bool "Allocate memory of WiFi and NET in SPIRAM"
|
|
depends on ESP_SPIRAM
|
|
help
|
|
Allocate memory of WiFi and NET stack in SPIRAM, increasing available RAM memory space
|
|
for application stack.
|
|
|
|
config ESP_WIFI_SOFTAP_SUPPORT
|
|
bool
|
|
default y
|
|
help
|
|
Hidden option to enable Wi-Fi SoftAP functions in WPA supplicant and RF libraries.
|
|
|
|
endif # WIFI_ESP32
|