56 lines
2.2 KiB
ReStructuredText
56 lines
2.2 KiB
ReStructuredText
.. _vlan_interface:
|
|
|
|
Virtual LAN (VLAN) Support
|
|
##########################
|
|
|
|
.. contents::
|
|
:local:
|
|
:depth: 2
|
|
|
|
Overview
|
|
********
|
|
|
|
`Virtual LAN <https://wikipedia.org/wiki/Virtual_LAN>`_ (VLAN) is a
|
|
partitioned and isolated computer network at the data link layer
|
|
(OSI layer 2). For ethernet network this refers to
|
|
`IEEE 802.1Q <https://en.wikipedia.org/wiki/IEEE_802.1Q>`_
|
|
|
|
In Zephyr, each individual VLAN is modeled as a virtual network interface.
|
|
This means that there is an ethernet network interface that corresponds to
|
|
a real physical ethernet port in the system. A virtual network interface is
|
|
created for each VLAN, and this virtual network interface connects to the
|
|
real network interface. This is similar to how Linux implements VLANs. The
|
|
*eth0* is the real network interface and *vlan0* is a virtual network interface
|
|
that is run on top of *eth0*.
|
|
|
|
VLAN support must be enabled at compile time by setting option
|
|
:option:`CONFIG_NET_VLAN` and :option:`CONFIG_NET_VLAN_COUNT` to reflect how
|
|
many network interfaces there will be in the system. For example, if there is
|
|
one network interface without VLAN support, and two with VLAN support, the
|
|
:option:`CONFIG_NET_VLAN_COUNT` option should be set to 3.
|
|
|
|
Even if VLAN is enabled in a :file:`prj.conf` file, the VLAN needs to be
|
|
activated at runtime by the application. The VLAN API provides a
|
|
:cpp:func:`net_eth_vlan_enable()` function to do that. The application needs
|
|
to give the network interface and desired VLAN tag as a parameter to that
|
|
function. The VLAN tagging for a given network interface can be disabled by a
|
|
:cpp:func:`net_eth_vlan_disable()` function. The application needs to configure
|
|
the VLAN network interface itself, such as setting the IP address, etc.
|
|
|
|
See also the :ref:`VLAN sample application <vlan-sample>` for API usage
|
|
example. The source code for that sample application can be found at
|
|
:zephyr_file:`samples/net/vlan`.
|
|
|
|
The net-shell module contains *net vlan add* and *net vlan del* commands
|
|
that can be used to enable or disable VLAN tags for a given network interface.
|
|
|
|
See the `IEEE 802.1Q spec`_ for more information about ethernet VLANs.
|
|
|
|
.. _IEEE 802.1Q spec: https://ieeexplore.ieee.org/document/6991462/
|
|
|
|
API Reference
|
|
*************
|
|
|
|
.. doxygengroup:: vlan_api
|
|
:project: Zephyr
|