zephyr/drivers/watchdog/wdt_wwdt_numaker.c

302 lines
7.3 KiB
C

/*
* Copyright (c) 2024 Nuvoton Technology Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nuvoton_numaker_wwdt
#include <zephyr/kernel.h>
#include <zephyr/drivers/reset.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/clock_control/clock_control_numaker.h>
#include <zephyr/drivers/watchdog.h>
#include <zephyr/logging/log.h>
#include <soc.h>
#include <NuMicro.h>
LOG_MODULE_REGISTER(wwdt_numaker, CONFIG_WDT_LOG_LEVEL);
#define NUMAKER_PRESCALER_MAX 15U
#define NUMAKER_COUNTER_MAX 0x3eU
#define NUMAKER_COUNTER_MIN 0x01U
/* Device config */
struct wwdt_numaker_config {
/* wdt base address */
WWDT_T *wwdt_base;
uint32_t clk_modidx;
uint32_t clk_src;
uint32_t clk_div;
const struct device *clk_dev;
};
struct wwdt_numaker_data {
wdt_callback_t cb;
bool timeout_valid;
/* watchdog timeout in milliseconds */
uint32_t timeout;
uint32_t prescaler;
uint32_t counter;
};
static int m_wwdt_numaker_clk_get_rate(const struct wwdt_numaker_config *cfg, uint32_t *rate)
{
if (cfg->clk_src == CLK_CLKSEL1_WWDTSEL_LIRC) {
*rate = __LIRC / (cfg->clk_div + 1);
} else {
/* clock source is from HCLK, CLK_CLKSEL1_WWDTSEL_HCLK_DIV2048 */
SystemCoreClockUpdate();
*rate = CLK_GetHCLKFreq() / 2048 / (cfg->clk_div + 1);
}
return 0;
}
/* Convert watchdog clock to nearest ms (rounded up) */
static uint32_t m_wwdt_numaker_calc_ms(const struct device *dev, uint32_t pow2)
{
const struct wwdt_numaker_config *cfg = dev->config;
uint32_t clk_freq;
uint32_t prescale_clks;
uint32_t period_ms;
m_wwdt_numaker_clk_get_rate(cfg, &clk_freq);
prescale_clks = (1 << pow2) * 64;
period_ms = DIV_ROUND_UP(prescale_clks * MSEC_PER_SEC, clk_freq);
return period_ms;
}
static int m_wwdt_numaker_calc_window(const struct device *dev,
const struct wdt_window *win,
uint32_t *timeout,
uint32_t *prescaler,
uint32_t *counter)
{
uint32_t pow2;
uint32_t gap;
/* Find nearest period value (rounded up) */
for (pow2 = 0U; pow2 <= NUMAKER_PRESCALER_MAX; pow2++) {
*timeout = m_wwdt_numaker_calc_ms(dev, pow2);
if (*timeout >= win->max) {
*prescaler = pow2 << WWDT_CTL_PSCSEL_Pos;
if (win->min == 0U) {
*counter = NUMAKER_COUNTER_MAX;
} else {
gap = DIV_ROUND_UP(win->min
* NUMAKER_COUNTER_MAX,
*timeout);
*counter = NUMAKER_COUNTER_MAX - gap;
if (*counter < NUMAKER_COUNTER_MIN) {
*counter = NUMAKER_COUNTER_MIN;
}
}
return 0;
}
}
return -EINVAL;
}
static int wwdt_numaker_install_timeout(const struct device *dev,
const struct wdt_timeout_cfg *cfg)
{
struct wwdt_numaker_data *data = dev->data;
const struct wwdt_numaker_config *config = dev->config;
uint32_t timeout;
uint32_t prescaler;
uint32_t counter;
LOG_DBG("");
/* Validate watchdog already running */
if (config->wwdt_base->CTL & WWDT_CTL_WWDTEN_Msk) {
LOG_ERR("watchdog is busy");
return -EBUSY;
}
if (cfg->window.max == 0U) {
LOG_ERR("window.max should be non-zero");
return -EINVAL;
}
if (m_wwdt_numaker_calc_window(dev, &cfg->window, &timeout, &prescaler, &counter) != 0) {
LOG_ERR("window.max is out of range");
return -EINVAL;
}
LOG_DBG("counter=%d", counter);
data->timeout = timeout;
data->prescaler = prescaler;
data->counter = counter;
data->cb = cfg->callback;
data->timeout_valid = true;
return 0;
}
static int wwdt_numaker_disable(const struct device *dev)
{
struct wwdt_numaker_data *data = dev->data;
const struct wwdt_numaker_config *cfg = dev->config;
WWDT_T *wwdt_base = cfg->wwdt_base;
LOG_DBG("");
/* stop counting */
wwdt_base->CTL &= ~WWDT_CTL_WWDTEN_Msk;
/* disable interrupt enable bit */
wwdt_base->CTL &= ~WWDT_CTL_INTEN_Msk;
/* disable interrupt */
irq_disable(DT_INST_IRQN(0));
data->timeout_valid = false;
return 0;
}
static int wwdt_numaker_setup(const struct device *dev, uint8_t options)
{
struct wwdt_numaker_data *data = dev->data;
const struct wwdt_numaker_config *cfg = dev->config;
WWDT_T *wwdt_base = cfg->wwdt_base;
uint32_t dbg_mask = 0U;
LOG_DBG("");
irq_disable(DT_INST_IRQN(0));
/* Validate watchdog already running */
if (wwdt_base->CTL & WWDT_CTL_WWDTEN_Msk) {
LOG_ERR("watchdog is busy");
return -EBUSY;
}
if (!data->timeout_valid) {
LOG_ERR("No valid timeout installed");
return -EINVAL;
}
if (options & WDT_OPT_PAUSE_IN_SLEEP) {
LOG_ERR("WDT_OPT_PAUSE_IN_SLEEP is not supported");
return -ENOTSUP;
}
if (options & WDT_OPT_PAUSE_HALTED_BY_DBG) {
dbg_mask = WWDT_CTL_ICEDEBUG_Msk;
}
/* Clear WWDT Reset & Compared Match Interrupt System Flag */
wwdt_base->STATUS = WWDT_STATUS_WWDTRF_Msk |
WWDT_STATUS_WWDTIF_Msk;
/* Open WWDT and start counting */
wwdt_base->CTL = data->prescaler |
(data->counter << WWDT_CTL_CMPDAT_Pos) |
WWDT_CTL_INTEN_Msk |
WWDT_CTL_WWDTEN_Msk |
dbg_mask;
irq_enable(DT_INST_IRQN(0));
return 0;
}
static int wwdt_numaker_feed(const struct device *dev, int channel_id)
{
const struct wwdt_numaker_config *cfg = dev->config;
WWDT_T *wwdt_base = cfg->wwdt_base;
LOG_DBG("CNT=%d, CTL=0x%x", wwdt_base->CNT, wwdt_base->CTL);
ARG_UNUSED(channel_id);
/* Reload WWDT Counter */
wwdt_base->RLDCNT = WWDT_RELOAD_WORD;
return 0;
}
static void wwdt_numaker_isr(const struct device *dev)
{
struct wwdt_numaker_data *data = dev->data;
const struct wwdt_numaker_config *cfg = dev->config;
WWDT_T *wwdt_base = cfg->wwdt_base;
LOG_DBG("CNT=%d", wwdt_base->CNT);
if (wwdt_base->STATUS & WWDT_STATUS_WWDTIF_Msk) {
/* Clear WWDT Compared Match Interrupt Flag */
wwdt_base->STATUS = WWDT_STATUS_WWDTIF_Msk;
if (data->cb != NULL) {
data->cb(dev, 0);
}
}
}
static const struct wdt_driver_api wwdt_numaker_api = {
.setup = wwdt_numaker_setup,
.disable = wwdt_numaker_disable,
.install_timeout = wwdt_numaker_install_timeout,
.feed = wwdt_numaker_feed,
};
static int wwdt_numaker_init(const struct device *dev)
{
const struct wwdt_numaker_config *cfg = dev->config;
struct numaker_scc_subsys scc_subsys;
int err;
SYS_UnlockReg();
irq_disable(DT_INST_IRQN(0));
/* CLK controller */
memset(&scc_subsys, 0x00, sizeof(scc_subsys));
scc_subsys.subsys_id = NUMAKER_SCC_SUBSYS_ID_PCC;
scc_subsys.pcc.clk_modidx = cfg->clk_modidx;
scc_subsys.pcc.clk_src = cfg->clk_src;
scc_subsys.pcc.clk_div = cfg->clk_div;
/* Equivalent to CLK_EnableModuleClock() */
err = clock_control_on(cfg->clk_dev, (clock_control_subsys_t)&scc_subsys);
if (err != 0) {
goto done;
}
/* Equivalent to CLK_SetModuleClock() */
err = clock_control_configure(cfg->clk_dev, (clock_control_subsys_t)&scc_subsys, NULL);
if (err != 0) {
goto done;
}
/* Enable NVIC */
IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority),
wwdt_numaker_isr, DEVICE_DT_INST_GET(0), 0);
irq_enable(DT_INST_IRQN(0));
done:
SYS_LockReg();
return err;
}
/* Set config based on DTS */
static struct wwdt_numaker_config wwdt_numaker_cfg_inst = {
.wwdt_base = (WWDT_T *)DT_INST_REG_ADDR(0),
.clk_modidx = DT_INST_CLOCKS_CELL(0, clock_module_index),
.clk_src = DT_INST_CLOCKS_CELL(0, clock_source),
.clk_div = DT_INST_CLOCKS_CELL(0, clock_divider),
.clk_dev = DEVICE_DT_GET(DT_PARENT(DT_INST_CLOCKS_CTLR(0))),
};
static struct wwdt_numaker_data wwdt_numaker_data_inst;
DEVICE_DT_INST_DEFINE(0, wwdt_numaker_init, NULL,
&wwdt_numaker_data_inst, &wwdt_numaker_cfg_inst,
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
&wwdt_numaker_api);