450 lines
13 KiB
C
450 lines
13 KiB
C
/*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Copyright (c) 2023 Nuvoton Technology Corporation.
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT nuvoton_numaker_uart
|
|
|
|
#include <string.h>
|
|
#include <zephyr/drivers/uart.h>
|
|
#include <zephyr/drivers/reset.h>
|
|
#include <zephyr/irq.h>
|
|
#include <zephyr/logging/log.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <zephyr/drivers/clock_control/clock_control_numaker.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <NuMicro.h>
|
|
|
|
LOG_MODULE_REGISTER(numaker_uart, LOG_LEVEL_ERR);
|
|
|
|
struct uart_numaker_config {
|
|
UART_T *uart;
|
|
const struct reset_dt_spec reset;
|
|
uint32_t clk_modidx;
|
|
uint32_t clk_src;
|
|
uint32_t clk_div;
|
|
const struct device *clk_dev;
|
|
uint32_t irq_n;
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
void (*irq_config_func)(const struct device *dev);
|
|
#endif
|
|
const struct pinctrl_dev_config *pincfg;
|
|
};
|
|
|
|
struct uart_numaker_data {
|
|
const struct device *clock;
|
|
struct uart_config ucfg;
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
uart_irq_callback_user_data_t user_cb;
|
|
void *user_data;
|
|
#endif
|
|
};
|
|
|
|
static int uart_numaker_poll_in(const struct device *dev, unsigned char *c)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
uint32_t count;
|
|
|
|
count = UART_Read(config->uart, c, 1);
|
|
if (!count) {
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uart_numaker_poll_out(const struct device *dev, unsigned char c)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
|
|
UART_Write(config->uart, &c, 1);
|
|
}
|
|
|
|
static int uart_numaker_err_check(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
uint32_t flags = uart->FIFOSTS;
|
|
int err = 0;
|
|
|
|
if (flags & UART_FIFOSTS_RXOVIF_Msk) {
|
|
err |= UART_ERROR_OVERRUN;
|
|
}
|
|
|
|
if (flags & UART_FIFOSTS_PEF_Msk) {
|
|
err |= UART_ERROR_PARITY;
|
|
}
|
|
|
|
if (flags & UART_FIFOSTS_FEF_Msk) {
|
|
err |= UART_ERROR_FRAMING;
|
|
}
|
|
|
|
if (flags & UART_FIFOSTS_BIF_Msk) {
|
|
err |= UART_BREAK;
|
|
}
|
|
|
|
if (flags & (UART_FIFOSTS_BIF_Msk | UART_FIFOSTS_FEF_Msk | UART_FIFOSTS_PEF_Msk |
|
|
UART_FIFOSTS_RXOVIF_Msk)) {
|
|
uart->FIFOSTS = (UART_FIFOSTS_BIF_Msk | UART_FIFOSTS_FEF_Msk |
|
|
UART_FIFOSTS_PEF_Msk | UART_FIFOSTS_RXOVIF_Msk);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static inline int32_t uart_numaker_convert_stopbit(enum uart_config_stop_bits sb)
|
|
{
|
|
switch (sb) {
|
|
case UART_CFG_STOP_BITS_1:
|
|
return UART_STOP_BIT_1;
|
|
case UART_CFG_STOP_BITS_1_5:
|
|
return UART_STOP_BIT_1_5;
|
|
case UART_CFG_STOP_BITS_2:
|
|
return UART_STOP_BIT_2;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
};
|
|
|
|
static inline int32_t uart_numaker_convert_datalen(enum uart_config_data_bits db)
|
|
{
|
|
switch (db) {
|
|
case UART_CFG_DATA_BITS_5:
|
|
return UART_WORD_LEN_5;
|
|
case UART_CFG_DATA_BITS_6:
|
|
return UART_WORD_LEN_6;
|
|
case UART_CFG_DATA_BITS_7:
|
|
return UART_WORD_LEN_7;
|
|
case UART_CFG_DATA_BITS_8:
|
|
return UART_WORD_LEN_8;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
}
|
|
|
|
static inline uint32_t uart_numaker_convert_parity(enum uart_config_parity parity)
|
|
{
|
|
switch (parity) {
|
|
case UART_CFG_PARITY_ODD:
|
|
return UART_PARITY_ODD;
|
|
case UART_CFG_PARITY_EVEN:
|
|
return UART_PARITY_EVEN;
|
|
case UART_CFG_PARITY_MARK:
|
|
return UART_PARITY_MARK;
|
|
case UART_CFG_PARITY_SPACE:
|
|
return UART_PARITY_SPACE;
|
|
case UART_CFG_PARITY_NONE:
|
|
default:
|
|
return UART_PARITY_NONE;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_UART_USE_RUNTIME_CONFIGURE
|
|
static int uart_numaker_configure(const struct device *dev, const struct uart_config *cfg)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
struct uart_numaker_data *pData = dev->data;
|
|
int32_t databits, stopbits;
|
|
uint32_t parity;
|
|
|
|
databits = uart_numaker_convert_datalen(cfg->data_bits);
|
|
if (databits < 0) {
|
|
return databits;
|
|
}
|
|
|
|
stopbits = uart_numaker_convert_stopbit(cfg->stop_bits);
|
|
if (stopbits < 0) {
|
|
return stopbits;
|
|
}
|
|
|
|
if (cfg->flow_ctrl == UART_CFG_FLOW_CTRL_NONE) {
|
|
UART_DisableFlowCtrl(config->uart);
|
|
} else if (cfg->flow_ctrl == UART_CFG_FLOW_CTRL_RTS_CTS) {
|
|
UART_EnableFlowCtrl(config->uart);
|
|
} else {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
parity = uart_numaker_convert_parity(cfg->parity);
|
|
|
|
UART_SetLineConfig(config->uart, cfg->baudrate, databits, parity, stopbits);
|
|
|
|
memcpy(&pData->ucfg, cfg, sizeof(*cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uart_numaker_config_get(const struct device *dev, struct uart_config *cfg)
|
|
{
|
|
struct uart_numaker_data *pData = dev->data;
|
|
|
|
memcpy(cfg, &pData->ucfg, sizeof(*cfg));
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_UART_USE_RUNTIME_CONFIGURE */
|
|
|
|
static int uart_numaker_init(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
struct uart_numaker_data *pData = dev->data;
|
|
int err = 0;
|
|
|
|
SYS_UnlockReg();
|
|
|
|
struct numaker_scc_subsys scc_subsys;
|
|
|
|
memset(&scc_subsys, 0x00, sizeof(scc_subsys));
|
|
scc_subsys.subsys_id = NUMAKER_SCC_SUBSYS_ID_PCC;
|
|
scc_subsys.pcc.clk_modidx = config->clk_modidx;
|
|
scc_subsys.pcc.clk_src = config->clk_src;
|
|
scc_subsys.pcc.clk_div = config->clk_div;
|
|
|
|
/* Equivalent to CLK_EnableModuleClock(clk_modidx) */
|
|
err = clock_control_on(config->clk_dev, (clock_control_subsys_t)&scc_subsys);
|
|
if (err != 0) {
|
|
goto move_exit;
|
|
}
|
|
/* Equivalent to CLK_SetModuleClock(clk_modidx, clk_src, clk_div) */
|
|
err = clock_control_configure(config->clk_dev, (clock_control_subsys_t)&scc_subsys, NULL);
|
|
if (err != 0) {
|
|
goto move_exit;
|
|
}
|
|
|
|
/*
|
|
* Set pinctrl for UART0 RXD and TXD
|
|
* Set multi-function pins for UART0 RXD and TXD
|
|
*/
|
|
err = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
|
|
if (err != 0) {
|
|
goto move_exit;
|
|
}
|
|
|
|
/* Same as BSP's SYS_ResetModule(id_rst) */
|
|
if (!device_is_ready(config->reset.dev)) {
|
|
LOG_ERR("reset controller not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Reset UART to default state */
|
|
reset_line_toggle_dt(&config->reset);
|
|
|
|
UART_Open(config->uart, pData->ucfg.baudrate);
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
config->irq_config_func(dev);
|
|
#endif
|
|
|
|
move_exit:
|
|
SYS_LockReg();
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
static int uart_numaker_fifo_fill(const struct device *dev, const uint8_t *tx_data, int size)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
int tx_bytes = 0;
|
|
|
|
/* Check TX FIFO not full, then fill */
|
|
while (((size - tx_bytes) > 0) && (!(uart->FIFOSTS & UART_FIFOSTS_TXFULL_Msk))) {
|
|
/* Fill one byte into TX FIFO */
|
|
uart->DAT = tx_data[tx_bytes++];
|
|
}
|
|
|
|
return tx_bytes;
|
|
}
|
|
|
|
static int uart_numaker_fifo_read(const struct device *dev, uint8_t *rx_data, const int size)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
int rx_bytes = 0;
|
|
|
|
/* Check RX FIFO not empty, then read */
|
|
while (((size - rx_bytes) > 0) && (!(uart->FIFOSTS & UART_FIFOSTS_RXEMPTY_Msk))) {
|
|
/* Read one byte from UART RX FIFO */
|
|
rx_data[rx_bytes++] = (uint8_t)uart->DAT;
|
|
}
|
|
|
|
return rx_bytes;
|
|
}
|
|
|
|
static void uart_numaker_irq_tx_enable(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
UART_EnableInt(uart, UART_INTEN_THREIEN_Msk);
|
|
}
|
|
|
|
static void uart_numaker_irq_tx_disable(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
UART_DisableInt(uart, UART_INTEN_THREIEN_Msk);
|
|
}
|
|
|
|
static int uart_numaker_irq_tx_ready(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
return ((!UART_IS_TX_FULL(uart)) && (uart->INTEN & UART_INTEN_THREIEN_Msk));
|
|
}
|
|
|
|
static int uart_numaker_irq_tx_complete(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
return (uart->INTSTS & UART_INTSTS_THREINT_Msk);
|
|
}
|
|
|
|
static void uart_numaker_irq_rx_enable(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
UART_EnableInt(uart, UART_INTEN_RDAIEN_Msk);
|
|
}
|
|
|
|
static void uart_numaker_irq_rx_disable(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
UART_DisableInt(uart, UART_INTEN_RDAIEN_Msk);
|
|
}
|
|
|
|
static int uart_numaker_irq_rx_ready(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
return ((!UART_GET_RX_EMPTY(uart)) && (uart->INTEN & UART_INTEN_RDAIEN_Msk));
|
|
}
|
|
|
|
static void uart_numaker_irq_err_enable(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
UART_EnableInt(uart, UART_INTEN_BUFERRIEN_Msk | UART_INTEN_SWBEIEN_Msk);
|
|
}
|
|
|
|
static void uart_numaker_irq_err_disable(const struct device *dev)
|
|
{
|
|
const struct uart_numaker_config *config = dev->config;
|
|
UART_T *uart = config->uart;
|
|
|
|
UART_DisableInt(uart, UART_INTEN_BUFERRIEN_Msk | UART_INTEN_SWBEIEN_Msk);
|
|
}
|
|
|
|
static int uart_numaker_irq_is_pending(const struct device *dev)
|
|
{
|
|
|
|
return (uart_numaker_irq_tx_ready(dev) || (uart_numaker_irq_rx_ready(dev)));
|
|
}
|
|
|
|
static int uart_numaker_irq_update(const struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
/* nothing to be done */
|
|
return 1;
|
|
}
|
|
|
|
static void uart_numaker_irq_callback_set(const struct device *dev,
|
|
uart_irq_callback_user_data_t cb, void *cb_data)
|
|
{
|
|
struct uart_numaker_data *pData = dev->data;
|
|
|
|
pData->user_cb = cb;
|
|
pData->user_data = cb_data;
|
|
}
|
|
|
|
static void uart_numaker_isr(const struct device *dev)
|
|
{
|
|
struct uart_numaker_data *pData = dev->data;
|
|
|
|
if (pData->user_cb) {
|
|
pData->user_cb(dev, pData->user_data);
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
|
|
|
|
static const struct uart_driver_api uart_numaker_driver_api = {
|
|
.poll_in = uart_numaker_poll_in,
|
|
.poll_out = uart_numaker_poll_out,
|
|
.err_check = uart_numaker_err_check,
|
|
#ifdef CONFIG_UART_USE_RUNTIME_CONFIGURE
|
|
.configure = uart_numaker_configure,
|
|
.config_get = uart_numaker_config_get,
|
|
#endif
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
.fifo_fill = uart_numaker_fifo_fill,
|
|
.fifo_read = uart_numaker_fifo_read,
|
|
.irq_tx_enable = uart_numaker_irq_tx_enable,
|
|
.irq_tx_disable = uart_numaker_irq_tx_disable,
|
|
.irq_tx_ready = uart_numaker_irq_tx_ready,
|
|
.irq_tx_complete = uart_numaker_irq_tx_complete,
|
|
.irq_rx_enable = uart_numaker_irq_rx_enable,
|
|
.irq_rx_disable = uart_numaker_irq_rx_disable,
|
|
.irq_rx_ready = uart_numaker_irq_rx_ready,
|
|
.irq_err_enable = uart_numaker_irq_err_enable,
|
|
.irq_err_disable = uart_numaker_irq_err_disable,
|
|
.irq_is_pending = uart_numaker_irq_is_pending,
|
|
.irq_update = uart_numaker_irq_update,
|
|
.irq_callback_set = uart_numaker_irq_callback_set,
|
|
#endif
|
|
};
|
|
|
|
#define CLOCK_CTRL_INIT(n) .clk_dev = DEVICE_DT_GET(DT_PARENT(DT_INST_CLOCKS_CTLR(n))),
|
|
|
|
#define PINCTRL_DEFINE(n) PINCTRL_DT_INST_DEFINE(n);
|
|
#define PINCTRL_INIT(n) .pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n),
|
|
|
|
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
|
|
#define NUMAKER_UART_IRQ_CONFIG_FUNC(n) \
|
|
static void uart_numaker_irq_config_##n(const struct device *dev) \
|
|
{ \
|
|
IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), uart_numaker_isr, \
|
|
DEVICE_DT_INST_GET(n), 0); \
|
|
irq_enable(DT_INST_IRQN(n)); \
|
|
}
|
|
#define IRQ_FUNC_INIT(n) .irq_config_func = uart_numaker_irq_config_##n
|
|
#else
|
|
#define NUMAKER_UART_IRQ_CONFIG_FUNC(n)
|
|
#define IRQ_FUNC_INIT(n)
|
|
#endif
|
|
|
|
#define NUMAKER_UART_INIT(inst) \
|
|
PINCTRL_DEFINE(inst) \
|
|
NUMAKER_UART_IRQ_CONFIG_FUNC(inst) \
|
|
\
|
|
static const struct uart_numaker_config uart_numaker_cfg_##inst = { \
|
|
.uart = (UART_T *)DT_INST_REG_ADDR(inst), \
|
|
.reset = RESET_DT_SPEC_INST_GET(inst), \
|
|
.clk_modidx = DT_INST_CLOCKS_CELL(inst, clock_module_index), \
|
|
.clk_src = DT_INST_CLOCKS_CELL(inst, clock_source), \
|
|
.clk_div = DT_INST_CLOCKS_CELL(inst, clock_divider), \
|
|
CLOCK_CTRL_INIT(inst).irq_n = DT_INST_IRQN(inst), \
|
|
PINCTRL_INIT(inst) IRQ_FUNC_INIT(inst)}; \
|
|
\
|
|
static struct uart_numaker_data uart_numaker_data_##inst = { \
|
|
.ucfg = \
|
|
{ \
|
|
.baudrate = DT_INST_PROP(inst, current_speed), \
|
|
}, \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(inst, uart_numaker_init, NULL, &uart_numaker_data_##inst, \
|
|
&uart_numaker_cfg_##inst, PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY, \
|
|
&uart_numaker_driver_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(NUMAKER_UART_INIT)
|