zephyr/drivers/input/input_npcx_kbd.c

243 lines
7.0 KiB
C

/*
* Copyright (c) 2019 Intel Corporation
* Copyright (c) 2022 Nuvoton Technology Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nuvoton_npcx_kbd
#include "soc_miwu.h"
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/input/input_kbd_matrix.h>
#include <zephyr/kernel.h>
#include <zephyr/logging/log.h>
#include <zephyr/sys/util.h>
#include <zephyr/toolchain.h>
#include <soc.h>
LOG_MODULE_REGISTER(input_npcx_kbd, CONFIG_INPUT_LOG_LEVEL);
#define ROW_SIZE DT_INST_PROP(0, row_size)
/* Driver config */
struct npcx_kbd_config {
struct input_kbd_matrix_common_config common;
/* Keyboard scan controller base address */
struct kbs_reg *base;
/* Clock configuration */
struct npcx_clk_cfg clk_cfg;
/* Pinmux configuration */
const struct pinctrl_dev_config *pcfg;
/* Keyboard scan input (KSI) wake-up irq */
int irq;
/* Size of keyboard inputs-wui mapping array */
int wui_size;
/* Mapping table between keyboard inputs and wui */
struct npcx_wui wui_maps[];
};
struct npcx_kbd_data {
struct input_kbd_matrix_common_data common;
struct miwu_callback ksi_callback[ROW_SIZE];
};
INPUT_KBD_STRUCT_CHECK(struct npcx_kbd_config, struct npcx_kbd_data);
/* Keyboard scan local functions */
static void npcx_kbd_ksi_isr(const struct device *dev, struct npcx_wui *wui)
{
ARG_UNUSED(wui);
input_kbd_matrix_poll_start(dev);
}
static void npcx_kbd_set_detect_mode(const struct device *dev, bool enabled)
{
const struct npcx_kbd_config *const config = dev->config;
const struct input_kbd_matrix_common_config *common = &config->common;
if (enabled) {
for (int i = 0; i < common->row_size; i++) {
npcx_miwu_irq_get_and_clear_pending(&config->wui_maps[i]);
}
irq_enable(config->irq);
} else {
irq_disable(config->irq);
}
}
static void npcx_kbd_drive_column(const struct device *dev, int col)
{
const struct npcx_kbd_config *config = dev->config;
const struct input_kbd_matrix_common_config *common = &config->common;
struct kbs_reg *const inst = config->base;
uint32_t mask;
if (col >= common->col_size) {
LOG_ERR("invalid column: %d", col);
return;
}
if (col == INPUT_KBD_MATRIX_COLUMN_DRIVE_NONE) {
/* Drive all lines to high: key detection is disabled */
mask = ~0;
} else if (col == INPUT_KBD_MATRIX_COLUMN_DRIVE_ALL) {
/* Drive all lines to low for detection any key press */
mask = ~BIT_MASK(common->col_size);
} else {
/*
* Drive one line to low for determining which key's state
* changed.
*/
mask = ~BIT(col);
}
LOG_DBG("Drive col mask: %x", mask);
inst->KBSOUT0 = (mask & 0xFFFF);
inst->KBSOUT1 = ((mask >> 16) & 0x03);
}
static kbd_row_t npcx_kbd_read_row(const struct device *dev)
{
const struct npcx_kbd_config *config = dev->config;
const struct input_kbd_matrix_common_config *common = &config->common;
struct kbs_reg *const inst = config->base;
kbd_row_t val;
val = inst->KBSIN;
/* 1 means key pressed, otherwise means key released. */
val = ~val & BIT_MASK(common->row_size);
return val;
}
static void npcx_kbd_init_ksi_wui_callback(const struct device *dev,
struct miwu_callback *callback,
const struct npcx_wui *wui,
miwu_dev_callback_handler_t handler)
{
/* KSI signal which has no wake-up input source */
if (wui->table == NPCX_MIWU_TABLE_NONE) {
return;
}
/* Install callback function */
npcx_miwu_init_dev_callback(callback, wui, handler, dev);
npcx_miwu_manage_callback(callback, 1);
/* Configure MIWU setting and enable its interrupt */
npcx_miwu_interrupt_configure(wui, NPCX_MIWU_MODE_EDGE, NPCX_MIWU_TRIG_LOW);
npcx_miwu_irq_enable(wui);
}
static int npcx_kbd_init(const struct device *dev)
{
const struct device *clk_dev = DEVICE_DT_GET(NPCX_CLK_CTRL_NODE);
const struct npcx_kbd_config *const config = dev->config;
const struct input_kbd_matrix_common_config *common = &config->common;
struct npcx_kbd_data *const data = dev->data;
struct kbs_reg *const inst = config->base;
int ret;
if (!device_is_ready(clk_dev)) {
LOG_ERR("%s device not ready", clk_dev->name);
return -ENODEV;
}
/* Turn on KBSCAN controller device clock */
ret = clock_control_on(clk_dev, (clock_control_subsys_t)&config->clk_cfg);
if (ret < 0) {
LOG_ERR("Turn on KBSCAN clock fail %d", ret);
return -EIO;
}
/* Pull-up KBSIN0-7 internally */
inst->KBSINPU = 0xFF;
/*
* Keyboard Scan Control Register
*
* [6:7] - KBHDRV KBSOUTn signals output buffers are open-drain.
* [3] - KBSINC Auto-increment of Buffer Data register is disabled
* [2] - KBSIEN Interrupt of Auto-Scan is disabled
* [1] - KBSMODE Key detection mechanism is implemented by firmware
* [0] - START Write 0 to this field is not affected
*/
inst->KBSCTL = 0x00;
/*
* Select quasi-bidirectional buffers for KSO pins. It reduces the
* low-to-high transition time. This feature only supports in npcx7.
*/
if (IS_ENABLED(CONFIG_INPUT_NPCX_KBD_KSO_HIGH_DRIVE)) {
SET_FIELD(inst->KBSCTL, NPCX_KBSCTL_KBHDRV_FIELD, 0x01);
}
/* Drive all column lines to low for detection any key press */
npcx_kbd_drive_column(dev, INPUT_KBD_MATRIX_COLUMN_DRIVE_NONE);
if (common->row_size != ROW_SIZE) {
LOG_ERR("Unexpected ROW_SIZE: %d != %d", common->row_size, ROW_SIZE);
return -EINVAL;
}
/* Configure wake-up input and callback for keyboard input signal */
for (int i = 0; i < common->row_size; i++) {
npcx_kbd_init_ksi_wui_callback(
dev, &data->ksi_callback[i], &config->wui_maps[i],
npcx_kbd_ksi_isr);
}
/* Configure pin-mux for keyboard scan device */
ret = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
if (ret < 0) {
LOG_ERR("keyboard scan pinctrl setup failed (%d)", ret);
return ret;
}
return input_kbd_matrix_common_init(dev);
}
PINCTRL_DT_INST_DEFINE(0);
INPUT_KBD_MATRIX_DT_INST_DEFINE(0);
static const struct input_kbd_matrix_api npcx_kbd_api = {
.drive_column = npcx_kbd_drive_column,
.read_row = npcx_kbd_read_row,
.set_detect_mode = npcx_kbd_set_detect_mode,
};
static const struct npcx_kbd_config npcx_kbd_cfg_0 = {
.common = INPUT_KBD_MATRIX_DT_INST_COMMON_CONFIG_INIT(0, &npcx_kbd_api),
.base = (struct kbs_reg *)DT_INST_REG_ADDR(0),
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(0),
.clk_cfg = NPCX_DT_CLK_CFG_ITEM(0),
.irq = DT_INST_IRQN(0),
.wui_size = NPCX_DT_WUI_ITEMS_LEN(0),
.wui_maps = NPCX_DT_WUI_ITEMS_LIST(0),
};
static struct npcx_kbd_data npcx_kbd_data_0;
PM_DEVICE_DT_INST_DEFINE(0, input_kbd_matrix_pm_action);
DEVICE_DT_INST_DEFINE(0, npcx_kbd_init, PM_DEVICE_DT_INST_GET(0),
&npcx_kbd_data_0, &npcx_kbd_cfg_0,
POST_KERNEL, CONFIG_INPUT_INIT_PRIORITY, NULL);
BUILD_ASSERT(!IS_ENABLED(CONFIG_PM_DEVICE_SYSTEM_MANAGED) ||
IS_ENABLED(CONFIG_PM_DEVICE_RUNTIME),
"CONFIG_PM_DEVICE_RUNTIME must be enabled when using CONFIG_PM_DEVICE_SYSTEM_MANAGED");
BUILD_ASSERT(DT_NUM_INST_STATUS_OKAY(DT_DRV_COMPAT) == 1,
"only one nuvoton,npcx-kbd compatible node can be supported");
BUILD_ASSERT(IN_RANGE(DT_INST_PROP(0, row_size), 1, 8), "invalid row-size");
BUILD_ASSERT(IN_RANGE(DT_INST_PROP(0, col_size), 1, 18), "invalid col-size");