194 lines
4.7 KiB
C
194 lines
4.7 KiB
C
/*
|
|
* Copyright (c) 2021 Piotr Mienkowski
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
/** @file
|
|
* @brief DAC driver for Atmel SAM MCU family.
|
|
*
|
|
* Remarks:
|
|
* Only SAME70, SAMV71 series devices are currently supported. Please submit a
|
|
* patch.
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT atmel_sam_dac
|
|
|
|
#include <errno.h>
|
|
#include <zephyr/sys/__assert.h>
|
|
#include <soc.h>
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/dac.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <zephyr/drivers/clock_control/atmel_sam_pmc.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/logging/log.h>
|
|
#include <zephyr/irq.h>
|
|
LOG_MODULE_REGISTER(dac_sam, CONFIG_DAC_LOG_LEVEL);
|
|
|
|
BUILD_ASSERT(IS_ENABLED(CONFIG_SOC_SERIES_SAME70) ||
|
|
IS_ENABLED(CONFIG_SOC_SERIES_SAMV71),
|
|
"Only SAME70, SAMV71 series devices are currently supported.");
|
|
|
|
#define DAC_CHANNEL_NO 2
|
|
|
|
/* Device constant configuration parameters */
|
|
struct dac_sam_dev_cfg {
|
|
Dacc *regs;
|
|
const struct atmel_sam_pmc_config clock_cfg;
|
|
const struct pinctrl_dev_config *pcfg;
|
|
void (*irq_config)(void);
|
|
uint8_t irq_id;
|
|
uint8_t prescaler;
|
|
};
|
|
|
|
struct dac_channel {
|
|
struct k_sem sem;
|
|
};
|
|
|
|
/* Device run time data */
|
|
struct dac_sam_dev_data {
|
|
struct dac_channel dac_channels[DAC_CHANNEL_NO];
|
|
};
|
|
|
|
static void dac_sam_isr(const struct device *dev)
|
|
{
|
|
const struct dac_sam_dev_cfg *const dev_cfg = dev->config;
|
|
struct dac_sam_dev_data *const dev_data = dev->data;
|
|
Dacc *const dac = dev_cfg->regs;
|
|
uint32_t int_stat;
|
|
|
|
/* Retrieve interrupt status */
|
|
int_stat = dac->DACC_ISR & dac->DACC_IMR;
|
|
|
|
if ((int_stat & DACC_ISR_TXRDY0) != 0) {
|
|
/* Disable Transmit Ready Interrupt */
|
|
dac->DACC_IDR = DACC_IDR_TXRDY0;
|
|
k_sem_give(&dev_data->dac_channels[0].sem);
|
|
}
|
|
if ((int_stat & DACC_ISR_TXRDY1) != 0) {
|
|
/* Disable Transmit Ready Interrupt */
|
|
dac->DACC_IDR = DACC_IDR_TXRDY1;
|
|
k_sem_give(&dev_data->dac_channels[1].sem);
|
|
}
|
|
}
|
|
|
|
static int dac_sam_channel_setup(const struct device *dev,
|
|
const struct dac_channel_cfg *channel_cfg)
|
|
{
|
|
const struct dac_sam_dev_cfg *const dev_cfg = dev->config;
|
|
Dacc *const dac = dev_cfg->regs;
|
|
|
|
if (channel_cfg->channel_id >= DAC_CHANNEL_NO) {
|
|
return -EINVAL;
|
|
}
|
|
if (channel_cfg->resolution != 12) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (channel_cfg->internal) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/* Enable Channel */
|
|
dac->DACC_CHER = DACC_CHER_CH0 << channel_cfg->channel_id;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dac_sam_write_value(const struct device *dev, uint8_t channel,
|
|
uint32_t value)
|
|
{
|
|
struct dac_sam_dev_data *const dev_data = dev->data;
|
|
const struct dac_sam_dev_cfg *const dev_cfg = dev->config;
|
|
Dacc *const dac = dev_cfg->regs;
|
|
|
|
if (channel >= DAC_CHANNEL_NO) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dac->DACC_IMR & (DACC_IMR_TXRDY0 << channel)) {
|
|
/* Attempting to send data on channel that's already in use */
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (value >= BIT(12)) {
|
|
LOG_ERR("value %d out of range", value);
|
|
return -EINVAL;
|
|
}
|
|
|
|
k_sem_take(&dev_data->dac_channels[channel].sem, K_FOREVER);
|
|
|
|
/* Trigger conversion */
|
|
dac->DACC_CDR[channel] = DACC_CDR_DATA0(value);
|
|
|
|
/* Enable Transmit Ready Interrupt */
|
|
dac->DACC_IER = DACC_IER_TXRDY0 << channel;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dac_sam_init(const struct device *dev)
|
|
{
|
|
const struct dac_sam_dev_cfg *const dev_cfg = dev->config;
|
|
struct dac_sam_dev_data *const dev_data = dev->data;
|
|
Dacc *const dac = dev_cfg->regs;
|
|
int retval;
|
|
|
|
/* Configure interrupts */
|
|
dev_cfg->irq_config();
|
|
|
|
/* Initialize semaphores */
|
|
for (int i = 0; i < ARRAY_SIZE(dev_data->dac_channels); i++) {
|
|
k_sem_init(&dev_data->dac_channels[i].sem, 1, 1);
|
|
}
|
|
|
|
/* Enable DAC clock in PMC */
|
|
(void)clock_control_on(SAM_DT_PMC_CONTROLLER,
|
|
(clock_control_subsys_t)&dev_cfg->clock_cfg);
|
|
|
|
retval = pinctrl_apply_state(dev_cfg->pcfg, PINCTRL_STATE_DEFAULT);
|
|
if (retval < 0) {
|
|
return retval;
|
|
}
|
|
|
|
/* Set Mode Register */
|
|
dac->DACC_MR = DACC_MR_PRESCALER(dev_cfg->prescaler);
|
|
|
|
/* Enable module's IRQ */
|
|
irq_enable(dev_cfg->irq_id);
|
|
|
|
LOG_INF("Device %s initialized", dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dac_driver_api dac_sam_driver_api = {
|
|
.channel_setup = dac_sam_channel_setup,
|
|
.write_value = dac_sam_write_value,
|
|
};
|
|
|
|
/* DACC */
|
|
|
|
static void dacc_irq_config(void)
|
|
{
|
|
IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), dac_sam_isr,
|
|
DEVICE_DT_INST_GET(0), 0);
|
|
}
|
|
|
|
PINCTRL_DT_INST_DEFINE(0);
|
|
|
|
static const struct dac_sam_dev_cfg dacc_sam_config = {
|
|
.regs = (Dacc *)DT_INST_REG_ADDR(0),
|
|
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(0),
|
|
.irq_id = DT_INST_IRQN(0),
|
|
.irq_config = dacc_irq_config,
|
|
.clock_cfg = SAM_DT_INST_CLOCK_PMC_CFG(0),
|
|
.prescaler = DT_INST_PROP(0, prescaler),
|
|
};
|
|
|
|
static struct dac_sam_dev_data dacc_sam_data;
|
|
|
|
DEVICE_DT_INST_DEFINE(0, dac_sam_init, NULL, &dacc_sam_data, &dacc_sam_config,
|
|
POST_KERNEL, CONFIG_DAC_INIT_PRIORITY,
|
|
&dac_sam_driver_api);
|