248 lines
6.3 KiB
C
248 lines
6.3 KiB
C
/*
|
|
* Copyright (c) 2022 Espressif Systems (Shanghai) Co., Ltd.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT espressif_esp32_rtc_timer
|
|
|
|
/*
|
|
* Include esp-idf headers first to avoid
|
|
* redefining BIT() macro
|
|
*/
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#include "soc/rtc.h"
|
|
#include <esp_rom_sys.h>
|
|
#include <hal/rtc_cntl_ll.h>
|
|
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/counter.h>
|
|
#include <zephyr/spinlock.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <zephyr/drivers/clock_control/esp32_clock_control.h>
|
|
|
|
#if defined(CONFIG_SOC_SERIES_ESP32C2) || defined(CONFIG_SOC_SERIES_ESP32C3)
|
|
#include <zephyr/drivers/interrupt_controller/intc_esp32c3.h>
|
|
#else
|
|
#include <zephyr/drivers/interrupt_controller/intc_esp32.h>
|
|
#endif
|
|
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(esp32_counter_rtc, CONFIG_COUNTER_LOG_LEVEL);
|
|
|
|
#if defined(CONFIG_SOC_SERIES_ESP32C2) || defined(CONFIG_SOC_SERIES_ESP32C3)
|
|
#define ESP32_COUNTER_RTC_ISR_HANDLER isr_handler_t
|
|
#else
|
|
#define ESP32_COUNTER_RTC_ISR_HANDLER intr_handler_t
|
|
#endif
|
|
|
|
static void counter_esp32_isr(void *arg);
|
|
|
|
struct counter_esp32_config {
|
|
struct counter_config_info counter_info;
|
|
int irq_source;
|
|
int irq_priority;
|
|
int irq_flags;
|
|
const struct device *clock_dev;
|
|
};
|
|
|
|
struct counter_esp32_data {
|
|
struct counter_alarm_cfg alarm_cfg;
|
|
uint32_t ticks;
|
|
uint32_t clk_src_freq;
|
|
};
|
|
|
|
static int counter_esp32_init(const struct device *dev)
|
|
{
|
|
const struct counter_esp32_config *cfg = dev->config;
|
|
struct counter_esp32_data *data = dev->data;
|
|
|
|
/* RTC_SLOW_CLK is the default clk source */
|
|
clock_control_get_rate(cfg->clock_dev,
|
|
(clock_control_subsys_t)ESP32_CLOCK_CONTROL_SUBSYS_RTC_SLOW,
|
|
&data->clk_src_freq);
|
|
|
|
int ret = esp_intr_alloc(cfg->irq_source,
|
|
ESP_PRIO_TO_FLAGS(cfg->irq_priority) |
|
|
ESP_INT_FLAGS_CHECK(cfg->irq_flags),
|
|
(ESP32_COUNTER_RTC_ISR_HANDLER)counter_esp32_isr,
|
|
(void *)dev,
|
|
NULL);
|
|
|
|
if (ret != 0) {
|
|
LOG_ERR("could not allocate interrupt (err %d)", ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int counter_esp32_start(const struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
/* RTC main timer runs after power-on reset */
|
|
return 0;
|
|
}
|
|
|
|
static int counter_esp32_stop(const struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
/*
|
|
* Any reset/sleep mode, except for the power-up
|
|
* reset, will not stop or reset the RTC timer
|
|
* ESP32 TRM v4.6 sec. 31.3.11
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static int counter_esp32_get_value(const struct device *dev, uint32_t *ticks)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
*ticks = (uint32_t) rtc_cntl_ll_get_rtc_time();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int counter_esp32_set_alarm(const struct device *dev, uint8_t chan_id,
|
|
const struct counter_alarm_cfg *alarm_cfg)
|
|
{
|
|
ARG_UNUSED(chan_id);
|
|
struct counter_esp32_data *data = dev->data;
|
|
uint32_t now;
|
|
uint32_t ticks = 0;
|
|
|
|
#if defined(CONFIG_SOC_SERIES_ESP32) || defined(CONFIG_SOC_SERIES_ESP32C2) || \
|
|
defined(CONFIG_SOC_SERIES_ESP32C3)
|
|
/* In ESP32/C3 Series the min possible value is 30 us*/
|
|
if (counter_ticks_to_us(dev, alarm_cfg->ticks) < 30) {
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
data->alarm_cfg.callback = alarm_cfg->callback;
|
|
data->alarm_cfg.user_data = alarm_cfg->user_data;
|
|
|
|
counter_esp32_get_value(dev, &now);
|
|
|
|
ticks = (alarm_cfg->flags & COUNTER_ALARM_CFG_ABSOLUTE) ? alarm_cfg->ticks
|
|
: now + alarm_cfg->ticks;
|
|
|
|
rtc_cntl_ll_set_wakeup_timer(ticks);
|
|
|
|
/* RTC main timer set alarm value */
|
|
CLEAR_PERI_REG_MASK(RTC_CNTL_SLP_TIMER1_REG, 0xffffffff);
|
|
|
|
/* RTC main timer set alarm enable */
|
|
SET_PERI_REG_MASK(RTC_CNTL_SLP_TIMER1_REG, RTC_CNTL_MAIN_TIMER_ALARM_EN);
|
|
|
|
/* RTC main timer interrupt enable */
|
|
SET_PERI_REG_MASK(RTC_CNTL_INT_ENA_REG, RTC_CNTL_MAIN_TIMER_INT_ENA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int counter_esp32_cancel_alarm(const struct device *dev, uint8_t chan_id)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
ARG_UNUSED(chan_id);
|
|
|
|
/* RTC main timer set alarm disable */
|
|
CLEAR_PERI_REG_MASK(RTC_CNTL_SLP_TIMER1_REG, RTC_CNTL_MAIN_TIMER_ALARM_EN);
|
|
|
|
/* RTC main timer interrupt disable */
|
|
SET_PERI_REG_MASK(RTC_CNTL_INT_CLR_REG, RTC_CNTL_MAIN_TIMER_INT_CLR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int counter_esp32_set_top_value(const struct device *dev,
|
|
const struct counter_top_cfg *cfg)
|
|
{
|
|
const struct counter_esp32_config *config = dev->config;
|
|
|
|
if (cfg->ticks != config->counter_info.max_top_value) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t counter_esp32_get_pending_int(const struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
uint32_t rc = READ_PERI_REG(RTC_CNTL_INT_ST_REG) & RTC_CNTL_MAIN_TIMER_INT_ST;
|
|
|
|
return (rc >> RTC_CNTL_MAIN_TIMER_INT_ST_S);
|
|
}
|
|
|
|
/*
|
|
* Espressif's RTC Timer is actually 48-bits in resolution
|
|
* However, the top value returned is limited to UINT32_MAX
|
|
* as per the counter API.
|
|
*/
|
|
static uint32_t counter_esp32_get_top_value(const struct device *dev)
|
|
{
|
|
const struct counter_esp32_config *cfg = dev->config;
|
|
|
|
return cfg->counter_info.max_top_value;
|
|
}
|
|
|
|
static uint32_t counter_esp32_get_freq(const struct device *dev)
|
|
{
|
|
struct counter_esp32_data *data = dev->data;
|
|
|
|
return data->clk_src_freq;
|
|
}
|
|
|
|
static struct counter_esp32_data counter_data;
|
|
|
|
static const struct counter_esp32_config counter_config = {
|
|
.counter_info = {
|
|
.max_top_value = UINT32_MAX,
|
|
.flags = COUNTER_CONFIG_INFO_COUNT_UP,
|
|
.channels = 1
|
|
},
|
|
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(0)),
|
|
.irq_source = DT_INST_IRQ_BY_IDX(0, 0, irq),
|
|
.irq_priority = DT_INST_IRQ_BY_IDX(0, 0, priority),
|
|
.irq_flags = DT_INST_IRQ_BY_IDX(0, 0, flags)
|
|
};
|
|
|
|
static const struct counter_driver_api rtc_timer_esp32_api = {
|
|
.start = counter_esp32_start,
|
|
.stop = counter_esp32_stop,
|
|
.get_value = counter_esp32_get_value,
|
|
.set_alarm = counter_esp32_set_alarm,
|
|
.cancel_alarm = counter_esp32_cancel_alarm,
|
|
.set_top_value = counter_esp32_set_top_value,
|
|
.get_pending_int = counter_esp32_get_pending_int,
|
|
.get_top_value = counter_esp32_get_top_value,
|
|
.get_freq = counter_esp32_get_freq,
|
|
};
|
|
|
|
static void counter_esp32_isr(void *arg)
|
|
{
|
|
const struct device *dev = (const struct device *)arg;
|
|
struct counter_esp32_data *data = dev->data;
|
|
uint32_t now;
|
|
|
|
counter_esp32_cancel_alarm(dev, 0);
|
|
counter_esp32_get_value(dev, &now);
|
|
|
|
if (data->alarm_cfg.callback) {
|
|
data->alarm_cfg.callback(dev, 0, now, data->alarm_cfg.user_data);
|
|
}
|
|
}
|
|
|
|
DEVICE_DT_INST_DEFINE(0,
|
|
&counter_esp32_init,
|
|
NULL,
|
|
&counter_data,
|
|
&counter_config,
|
|
POST_KERNEL,
|
|
CONFIG_COUNTER_INIT_PRIORITY,
|
|
&rtc_timer_esp32_api);
|