Andre Guedes 6e71586c37 i2c: qmsi: Add support for default configuration ... This patch extends the i2c shim driver so it supports the 'default configuration' infrastructure which enables the user to specify a default configuration for the I2C device. The default configuration is set during driver initialization. This patch also changes Quark SE and D2000 Kconfig.defconfig files so the i2c default configuration is set to '0x12' which means standard bus speed, 7-bit addressing and master mode. This is the same value used when DW driver is selected, by the way. Change-Id: I06e0dc3c29e8da2f3317db5bef285177f2e92c9a Signed-off-by: Andre Guedes <andre.guedes@intel.com>		2016-03-31 13:18:26 +00:00
..
Kconfig	i2c: remove orphan kconfig I2C_STATUS_DELAY	2016-03-30 13:39:09 +00:00
Kconfig.atmel_sam3	i2c/atmel_sam3: rename *_INT_PRIORITY to *_IRQ_PRI	2016-03-28 15:59:04 -07:00
Kconfig.dw	i2c/dw: remove kconfigs that are SoC specific	2016-03-31 01:11:23 +00:00
Kconfig.qmsi	i2c: qmsi: Add support for default configuration	2016-03-31 13:18:26 +00:00
Kconfig.quark_se_ss	i2c/quark_se_ss: Remove base address kconfig options	2016-03-28 16:09:15 -07:00
Makefile	i2c: adds driver for Atmel SAM3	2016-02-08 21:45:07 -05:00
i2c_atmel_sam3.c	i2c/atmel_sam3: rename *_INT_PRIORITY to *_IRQ_PRI	2016-03-28 15:59:04 -07:00
i2c_atmel_sam3.h	i2c: adds driver for Atmel SAM3	2016-02-08 21:45:07 -05:00
i2c_dw.c	i2c/dw: remove kconfigs that are SoC specific	2016-03-31 01:11:23 +00:00
i2c_dw.h	struct packing	2016-02-10 16:21:26 +00:00
i2c_dw_registers.h	struct packing	2016-02-10 16:21:26 +00:00
i2c_qmsi.c	i2c: qmsi: Add support for default configuration	2016-03-31 13:18:26 +00:00
i2c_quark_se_ss.c	i2c/quark_se_ss: Remove base address kconfig options	2016-03-28 16:09:15 -07:00
i2c_quark_se_ss.h	c++: Add extern "C" { } block to header files	2016-02-05 20:25:22 -05:00
i2c_quark_se_ss_registers.h	i2c/i2c_quark_se_ss: extends to do multi-byte read requests	2016-02-05 20:25:16 -05:00