zephyr

History

Radoslaw Koppel d1a93c1426 drivers: sensor: Const sensor trigger data in trigger handler This commit adds const modifier in second argument for sensor trigger handler. There is no reason to modify this data and this change would allow to store trigger configuration also in FLASH. Fixes: #38929 Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>		2021-10-27 15:09:35 -04:00
..
src	drivers: sensor: Const sensor trigger data in trigger handler	2021-10-27 15:09:35 -04:00
CMakeLists.txt	…
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _x-nucleo-iks01a2-std-sample:

X-NUCLEO-IKS01A2: shield Standard (Mode 1) sample
#################################################

Overview
********
This sample enables all sensors of a X-NUCLEO-IKS01A2 shield, and then
periodically reads and displays data from the shield sensors:

- HTS221: Ambient temperature and relative humidity
- LPS22HB: Atmospheric pressure and ambient temperature
- LSM6DSL: 3-Axis Acceleration and 3-Axis Angular Velocity
- LSM303AGR 3-Axis Acceleration and 3-axis Magnetic field intensity

Requirements
************

This sample communicates over I2C with the X-NUCLEO-IKS01A2 shield
stacked on a board with an Arduino connector. The board's I2C must be
configured for the I2C Arduino connector (both for pin muxing
and devicetree). See for example the :ref:`nucleo_f401re_board` board
source code:

- :zephyr_file:`boards/arm/nucleo_f401re/nucleo_f401re.dts`
- :zephyr_file:`boards/arm/nucleo_f401re/pinmux.c`

Please note that this sample can't be used with boards already supporting
one of the sensors available on the shield (such as disco_l475_iot1) as zephyr
does not yet support sensors multiple instances.

References
**********

-X-NUCLEO-IKS01A2: http://www.st.com/en/ecosystems/x-nucleo-iks01a2.html

Building and Running
********************

This sample runs with X-NUCLEO-IKS01A2 stacked on any board with a matching
Arduino connector. For this example, we use a :ref:`nucleo_f401re_board` board.

.. zephyr-app-commands::
   :zephyr-app: samples/shields/x_nucleo_iks01a2/standard
   :board: nucleo_f401re
   :goals: build
   :compact:

Sample Output
=============

 .. code-block:: console

    X-NUCLEO-IKS01A2 sensor dashboard

    HTS221: Temperature: 26.3 C
    HTS221: Relative Humidity: 44.5%
    LPS22HB: Pressure:99.220 kpa
    LPS22HB: Temperature: 26.1 C
    LSM6DSL: Accel (m.s-2): x: -0.0, y: -0.1, z: 10.0
    LSM6DSL: Gyro (dps): x: 0.028, y: -0.025, z: 0.014
    LSM303AGR: Accel (m.s-2): x: 0.3, y: -0.1, z: 9.7
    LSM303AGR: Magn (gauss): x: -0.221, y: -0.042, z: -0.458

    <updated endlessly every 2 seconds>