519 lines
12 KiB
C
519 lines
12 KiB
C
/*
|
|
* Copyright (c) 2017 Vitor Massaru Iha <vitor@massaru.org>
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
/* Include esp-idf headers first to avoid redefining BIT() macro */
|
|
#include <esp_intr_alloc.h>
|
|
#include <soc/dport_reg.h>
|
|
#include <rom/gpio.h>
|
|
#include <soc/gpio_sig_map.h>
|
|
#include <soc/ledc_reg.h>
|
|
|
|
#include <soc.h>
|
|
#include <errno.h>
|
|
#include <board.h>
|
|
#include <pwm.h>
|
|
#include <kernel.h>
|
|
#include <gpio.h>
|
|
#include <string.h>
|
|
|
|
#define PWM_ESP32_HSCH_HPOINT(i) (LEDC_HSCH0_HPOINT_REG + (0x14 * i))
|
|
#define PWM_ESP32_HSCH_DUTY(i) (LEDC_HSCH0_DUTY_REG + (0x14 * i))
|
|
#define PWM_ESP32_HSCH_CONF0(i) (LEDC_HSCH0_CONF0_REG + (0x14 * i))
|
|
#define PWM_ESP32_HSCH_CONF1(i) (LEDC_HSCH0_CONF1_REG + (0x14 * i))
|
|
#define PWM_ESP32_HSTIMER(i) (LEDC_HSTIMER0_CONF_REG + (0x8 * i))
|
|
|
|
#define PWM_ESP32_LSCH_HPOINT(i) (LEDC_LSCH0_HPOINT_REG + (0x14 * i))
|
|
#define PWM_ESP32_LSCH_DUTY(i) (LEDC_LSCH0_DUTY_REG + (0x14 * i))
|
|
#define PWM_ESP32_LSCH_CONF0(i) (LEDC_LSCH0_CONF0_REG + (0x14 * i))
|
|
#define PWM_ESP32_LSCH_CONF1(i) (LEDC_LSCH0_CONF1_REG + (0x14 * i))
|
|
#define PWM_ESP32_LSTIMER(i) (LEDC_LSTIMER0_CONF_REG + (0x8 * i))
|
|
|
|
enum {
|
|
PWM_LED_ESP32_REF_TICK_FREQ,
|
|
PWM_LED_ESP32_APB_CLK_FREQ,
|
|
};
|
|
|
|
enum {
|
|
PWM_LED_ESP32_HIGH_SPEED,
|
|
PWM_LED_ESP32_LOW_SPEED
|
|
};
|
|
|
|
struct pwm_led_esp32_timer {
|
|
int freq;
|
|
u8_t bit_num;
|
|
} __attribute__ ((__packed__));
|
|
|
|
struct pwm_led_esp32_channel {
|
|
u8_t timer : 2;
|
|
u8_t gpio : 6;
|
|
};
|
|
|
|
union pwm_led_esp32_duty {
|
|
struct {
|
|
u32_t start: 1;
|
|
u32_t direction: 1;
|
|
u32_t num: 3;
|
|
u32_t cycle: 3;
|
|
u32_t scale: 3;
|
|
};
|
|
u32_t val;
|
|
};
|
|
|
|
struct pwm_led_esp32_config {
|
|
/* Speed mode
|
|
* 0: High speed mode
|
|
* 1: Low speed mode
|
|
*
|
|
* Timers
|
|
* 0 - 3: 4 timers
|
|
*/
|
|
|
|
struct pwm_led_esp32_channel ch_cfg[16];
|
|
|
|
struct pwm_led_esp32_timer timer_cfg[2][4];
|
|
};
|
|
|
|
/* TODO: Remove these functions after this PR:
|
|
* https://github.com/zephyrproject-rtos/zephyr/pull/5113
|
|
*/
|
|
static inline void set_mask32(u32_t v, u32_t mem_addr)
|
|
{
|
|
sys_write32(sys_read32(mem_addr) | v, mem_addr);
|
|
}
|
|
|
|
static inline void clear_mask32(u32_t v, u32_t mem_addr)
|
|
{
|
|
sys_write32(sys_read32(mem_addr) & ~v, mem_addr);
|
|
}
|
|
|
|
static const char *esp32_get_gpio_for_pin(int pin)
|
|
{
|
|
if (pin < 32) {
|
|
#if defined(CONFIG_GPIO_ESP32_0)
|
|
return CONFIG_GPIO_ESP32_0_NAME;
|
|
#else
|
|
return NULL;
|
|
#endif /* CONFIG_GPIO_ESP32_0 */
|
|
}
|
|
|
|
#if defined(CONFIG_GPIO_ESP32_1)
|
|
return CONFIG_GPIO_ESP32_1_NAME;
|
|
#else
|
|
return NULL;
|
|
#endif /* CONFIG_GPIO_ESP32_1 */
|
|
}
|
|
/* end Remove after PR 5113 */
|
|
|
|
static u8_t pwm_led_esp32_get_gpio_config(u8_t pin,
|
|
const struct pwm_led_esp32_channel *ch_cfg)
|
|
{
|
|
u8_t i;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
if (ch_cfg[i].gpio == pin) {
|
|
return i;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void pwm_led_esp32_low_speed_update(int speed_mode, int channel)
|
|
{
|
|
u32_t reg_addr;
|
|
|
|
if (speed_mode == PWM_LED_ESP32_LOW_SPEED) {
|
|
reg_addr = PWM_ESP32_LSCH_CONF0(channel);
|
|
sys_set_bit(reg_addr, LEDC_PARA_UP_LSCH0_S);
|
|
}
|
|
}
|
|
|
|
static void pwm_led_esp32_update_duty(int speed_mode, int channel)
|
|
{
|
|
u32_t conf0_addr;
|
|
u32_t conf1_addr;
|
|
|
|
if (speed_mode == PWM_LED_ESP32_HIGH_SPEED) {
|
|
conf0_addr = PWM_ESP32_HSCH_CONF0(channel);
|
|
conf1_addr = PWM_ESP32_HSCH_CONF1(channel);
|
|
} else {
|
|
conf0_addr = PWM_ESP32_LSCH_CONF0(channel);
|
|
conf1_addr = PWM_ESP32_LSCH_CONF1(channel);
|
|
}
|
|
|
|
sys_set_bit(conf0_addr, LEDC_SIG_OUT_EN_LSCH0_S);
|
|
sys_set_bit(conf1_addr, LEDC_DUTY_START_LSCH0_S);
|
|
|
|
pwm_led_esp32_low_speed_update(speed_mode, channel);
|
|
}
|
|
|
|
static void pwm_led_esp32_duty_config(int speed_mode,
|
|
int channel,
|
|
int duty_val,
|
|
union pwm_led_esp32_duty duty)
|
|
{
|
|
volatile u32_t hpoint_addr;
|
|
volatile u32_t duty_addr;
|
|
volatile u32_t conf1_addr;
|
|
volatile u32_t conf1_val;
|
|
|
|
if (speed_mode == PWM_LED_ESP32_HIGH_SPEED) {
|
|
hpoint_addr = PWM_ESP32_HSCH_HPOINT(channel);
|
|
duty_addr = PWM_ESP32_HSCH_DUTY(channel);
|
|
conf1_addr = PWM_ESP32_HSCH_CONF1(channel);
|
|
|
|
} else {
|
|
hpoint_addr = PWM_ESP32_LSCH_HPOINT(channel);
|
|
duty_addr = PWM_ESP32_LSCH_DUTY(channel);
|
|
conf1_addr = PWM_ESP32_LSCH_CONF1(channel);
|
|
}
|
|
|
|
sys_write32(0, hpoint_addr);
|
|
sys_write32(duty_val, duty_addr);
|
|
sys_write32(duty.val, conf1_addr);
|
|
|
|
pwm_led_esp32_low_speed_update(speed_mode, channel);
|
|
}
|
|
|
|
static void pwm_led_esp32_duty_set(int speed_mode, int channel, int duty_val)
|
|
{
|
|
union pwm_led_esp32_duty duty;
|
|
|
|
duty.start = 0;
|
|
duty.direction = 1;
|
|
duty.cycle = 1;
|
|
duty.scale = 0;
|
|
|
|
pwm_led_esp32_duty_config(speed_mode, channel, duty_val << 4, duty);
|
|
}
|
|
|
|
static void pwm_led_esp32_bind_channel_timer(int speed_mode,
|
|
int channel,
|
|
int timer)
|
|
{
|
|
volatile u32_t timer_addr;
|
|
|
|
if (speed_mode == PWM_LED_ESP32_HIGH_SPEED) {
|
|
timer_addr = PWM_ESP32_HSCH_CONF0(channel);
|
|
} else {
|
|
timer_addr = PWM_ESP32_LSCH_CONF0(channel);
|
|
}
|
|
|
|
set_mask32(timer, timer_addr);
|
|
|
|
pwm_led_esp32_low_speed_update(speed_mode, channel);
|
|
}
|
|
|
|
static int pwm_led_esp32_channel_set(int pin, bool speed_mode, int channel,
|
|
int duty, int timer)
|
|
{
|
|
const int pin_mode = GPIO_DIR_OUT;
|
|
|
|
const char *device_name;
|
|
struct device *gpio;
|
|
int ret;
|
|
u32_t sig_out_idx;
|
|
|
|
/* Set duty cycle */
|
|
pwm_led_esp32_duty_set(speed_mode, channel, duty);
|
|
|
|
pwm_led_esp32_update_duty(speed_mode, channel);
|
|
|
|
pwm_led_esp32_bind_channel_timer(speed_mode, channel, timer);
|
|
|
|
/* Set pin */
|
|
device_name = esp32_get_gpio_for_pin(pin);
|
|
if (!device_name) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio = device_get_binding(device_name);
|
|
if (!gpio) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = gpio_pin_configure(gpio, pin, pin_mode);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (speed_mode == PWM_LED_ESP32_HIGH_SPEED) {
|
|
sig_out_idx = LEDC_HS_SIG_OUT0_IDX + channel;
|
|
} else {
|
|
sig_out_idx = LEDC_LS_SIG_OUT0_IDX + channel;
|
|
}
|
|
esp32_rom_gpio_matrix_out(pin, sig_out_idx, 0, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwm_led_esp32_timer_set(int speed_mode, int timer,
|
|
int bit_num, int frequency)
|
|
{
|
|
u32_t timer_addr;
|
|
u64_t div_num;
|
|
int tick_sel = PWM_LED_ESP32_APB_CLK_FREQ;
|
|
u32_t precision = (0x1 << bit_num);
|
|
|
|
assert(frequency > 0);
|
|
|
|
/* This expression comes from ESP32 Espressif's Technical Reference
|
|
* Manual chapter 13.2.2 Timers.
|
|
* div_num is a fixed point value (Q10.8).
|
|
*/
|
|
div_num = ((u64_t) APB_CLK_FREQ << 8) / frequency / precision;
|
|
|
|
if (div_num < 0x100) {
|
|
/* Since Q10.8 is a fixed point value, then div_num < 0x100
|
|
* means divisor is too low.
|
|
*/
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (div_num > 0x3FFFF) {
|
|
/* Since Q10.8 is a fixed point value, then div_num > 0x3FFFF
|
|
* means divisor is too high. We can try to use the REF_TICK.
|
|
*/
|
|
div_num = ((u64_t) 1000000 << 8) / frequency / precision;
|
|
if (div_num < 0x100 || div_num > 0x3FFFF) {
|
|
return -EINVAL;
|
|
}
|
|
tick_sel = PWM_LED_ESP32_REF_TICK_FREQ;
|
|
} else {
|
|
if (speed_mode) {
|
|
sys_set_bit(LEDC_CONF_REG, LEDC_APB_CLK_SEL_S);
|
|
}
|
|
}
|
|
|
|
if (speed_mode == PWM_LED_ESP32_HIGH_SPEED) {
|
|
timer_addr = PWM_ESP32_HSTIMER(timer);
|
|
} else {
|
|
timer_addr = PWM_ESP32_LSTIMER(timer);
|
|
}
|
|
|
|
set_mask32(div_num << LEDC_DIV_NUM_LSTIMER0_S, timer_addr);
|
|
set_mask32(tick_sel << LEDC_TICK_SEL_LSTIMER0_S, timer_addr);
|
|
set_mask32(bit_num & LEDC_LSTIMER0_LIM_M, timer_addr);
|
|
|
|
if (speed_mode) {
|
|
/* update div_num and bit_num */
|
|
sys_set_bit(timer_addr, LEDC_LSTIMER0_PARA_UP_S);
|
|
}
|
|
|
|
/* reset low speed timer */
|
|
sys_set_bit(timer_addr, LEDC_LSTIMER0_RST_S);
|
|
sys_clear_bit(timer_addr, LEDC_LSTIMER0_RST_S);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* period_cycles is not used, set frequency on menuconfig instead. */
|
|
static int pwm_led_esp32_pin_set_cycles(struct device *dev,
|
|
u32_t pwm, u32_t period_cycles,
|
|
u32_t pulse_cycles)
|
|
{
|
|
int speed_mode;
|
|
int channel;
|
|
int timer;
|
|
int ret;
|
|
const struct pwm_led_esp32_config * const config =
|
|
(struct pwm_led_esp32_config *) dev->config->config_info;
|
|
|
|
ARG_UNUSED(period_cycles);
|
|
|
|
channel = pwm_led_esp32_get_gpio_config(pwm, config->ch_cfg);
|
|
if (channel < 0) {
|
|
return -EINVAL;
|
|
}
|
|
speed_mode = channel < 8 ? PWM_LED_ESP32_HIGH_SPEED :
|
|
PWM_LED_ESP32_LOW_SPEED;
|
|
|
|
timer = config->ch_cfg[channel].timer;
|
|
/* Now we know which speed_mode and timer is set, then we will convert
|
|
* the channel number from (0 - 15) to (0 - 7).
|
|
*/
|
|
channel %= 8;
|
|
|
|
/* Enable peripheral */
|
|
set_mask32(DPORT_LEDC_CLK_EN, DPORT_PERIP_CLK_EN_REG);
|
|
clear_mask32(DPORT_LEDC_RST, DPORT_PERIP_RST_EN_REG);
|
|
|
|
/* Set timer */
|
|
ret = pwm_led_esp32_timer_set(speed_mode, timer,
|
|
config->timer_cfg[speed_mode][timer].bit_num,
|
|
config->timer_cfg[speed_mode][timer].freq);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* Set channel */
|
|
ret = pwm_led_esp32_channel_set(pwm, speed_mode, channel, 0, timer);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
pwm_led_esp32_duty_set(speed_mode, channel, pulse_cycles);
|
|
pwm_led_esp32_update_duty(speed_mode, channel);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pwm_led_esp32_get_cycles_per_sec(struct device *dev, u32_t pwm,
|
|
u64_t *cycles)
|
|
{
|
|
const struct pwm_led_esp32_config *config;
|
|
int channel;
|
|
int timer;
|
|
int speed_mode;
|
|
|
|
config = (struct pwm_led_esp32_config *) dev->config->config_info;
|
|
|
|
channel = pwm_led_esp32_get_gpio_config(pwm, config->ch_cfg);
|
|
if (channel < 0) {
|
|
return -EINVAL;
|
|
}
|
|
speed_mode = channel < 8 ? PWM_LED_ESP32_HIGH_SPEED :
|
|
PWM_LED_ESP32_LOW_SPEED;
|
|
|
|
timer = config->ch_cfg[channel].timer;
|
|
|
|
*cycles = config->timer_cfg[speed_mode][timer].freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_driver_api pwm_led_esp32_api = {
|
|
.pin_set = pwm_led_esp32_pin_set_cycles,
|
|
.get_cycles_per_sec = pwm_led_esp32_get_cycles_per_sec,
|
|
};
|
|
|
|
int pwm_led_esp32_init(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Initialization for PWM_LED_ESP32 */
|
|
#include <device.h>
|
|
#include <init.h>
|
|
|
|
DEVICE_DECLARE(pwm_led_esp32_0);
|
|
|
|
#define CH_HS_TIMER(i) ((CONFIG_PWM_LED_ESP32_HS_CH ## i ## _TIMER) & 0x2)
|
|
#define CH_HS_GPIO(i) ((CONFIG_PWM_LED_ESP32_HS_CH ## i ## _GPIO) & 0xfff)
|
|
#define CH_LS_TIMER(i) ((CONFIG_PWM_LED_ESP32_LS_CH ## i ## _TIMER) & 0x2)
|
|
#define CH_LS_GPIO(i) ((CONFIG_PWM_LED_ESP32_LS_CH ## i ## _GPIO) & 0xfff)
|
|
|
|
#define TIMER_HS_FREQ(i) (CONFIG_PWM_LED_ESP32_HS_TIMER ## i ## _FREQ)
|
|
#define TIMER_LS_FREQ(i) (CONFIG_PWM_LED_ESP32_LS_TIMER ## i ## _FREQ)
|
|
#define TIMER_HS_BIT_NUM(i) (CONFIG_PWM_LED_ESP32_HS_TIMER ## i ## _BIT_NUM)
|
|
#define TIMER_LS_BIT_NUM(i) (CONFIG_PWM_LED_ESP32_LS_TIMER ## i ## _BIT_NUM)
|
|
|
|
const static struct pwm_led_esp32_config pwm_led_esp32_config = {
|
|
.timer_cfg[PWM_LED_ESP32_HIGH_SPEED][0] = {
|
|
.bit_num = TIMER_HS_BIT_NUM(0),
|
|
.freq = TIMER_HS_FREQ(0),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_HIGH_SPEED][1] = {
|
|
.bit_num = TIMER_HS_BIT_NUM(1),
|
|
.freq = TIMER_HS_FREQ(1),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_HIGH_SPEED][2] = {
|
|
.bit_num = TIMER_HS_BIT_NUM(2),
|
|
.freq = TIMER_HS_FREQ(2),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_HIGH_SPEED][2] = {
|
|
.bit_num = TIMER_HS_BIT_NUM(2),
|
|
.freq = TIMER_HS_FREQ(2),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_HIGH_SPEED][3] = {
|
|
.bit_num = TIMER_HS_BIT_NUM(3),
|
|
.freq = TIMER_HS_FREQ(3),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_LOW_SPEED][0] = {
|
|
.bit_num = TIMER_LS_BIT_NUM(0),
|
|
.freq = TIMER_LS_FREQ(0),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_LOW_SPEED][1] = {
|
|
.bit_num = TIMER_LS_BIT_NUM(1),
|
|
.freq = TIMER_LS_FREQ(1),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_LOW_SPEED][2] = {
|
|
.bit_num = TIMER_LS_BIT_NUM(2),
|
|
.freq = TIMER_LS_FREQ(2),
|
|
},
|
|
.timer_cfg[PWM_LED_ESP32_LOW_SPEED][3] = {
|
|
.bit_num = TIMER_LS_BIT_NUM(3),
|
|
.freq = TIMER_LS_FREQ(3),
|
|
},
|
|
.ch_cfg[0] = {
|
|
.timer = CH_HS_TIMER(0),
|
|
.gpio = CH_HS_GPIO(0),
|
|
},
|
|
.ch_cfg[1] = {
|
|
.timer = CH_HS_TIMER(1),
|
|
.gpio = CH_HS_GPIO(1),
|
|
},
|
|
.ch_cfg[2] = {
|
|
.timer = CH_HS_TIMER(2),
|
|
.gpio = CH_HS_GPIO(2),
|
|
},
|
|
.ch_cfg[3] = {
|
|
.timer = CH_HS_TIMER(3),
|
|
.gpio = CH_HS_GPIO(3),
|
|
},
|
|
.ch_cfg[4] = {
|
|
.timer = CH_HS_TIMER(4),
|
|
.gpio = CH_HS_GPIO(4),
|
|
},
|
|
.ch_cfg[5] = {
|
|
.timer = CH_HS_TIMER(5),
|
|
.gpio = CH_HS_GPIO(5),
|
|
},
|
|
.ch_cfg[6] = {
|
|
.timer = CH_HS_TIMER(6),
|
|
.gpio = CH_HS_GPIO(6),
|
|
},
|
|
.ch_cfg[7] = {
|
|
.timer = CH_HS_TIMER(7),
|
|
.gpio = CH_HS_GPIO(7),
|
|
},
|
|
.ch_cfg[8] = {
|
|
.timer = CH_LS_TIMER(0),
|
|
.gpio = CH_LS_GPIO(0),
|
|
},
|
|
.ch_cfg[9] = {
|
|
.timer = CH_LS_TIMER(1),
|
|
.gpio = CH_LS_GPIO(1),
|
|
},
|
|
.ch_cfg[10] = {
|
|
.timer = CH_LS_TIMER(2),
|
|
.gpio = CH_LS_GPIO(2),
|
|
},
|
|
.ch_cfg[11] = {
|
|
.timer = CH_LS_TIMER(3),
|
|
.gpio = CH_LS_GPIO(3),
|
|
},
|
|
.ch_cfg[12] = {
|
|
.timer = CH_LS_TIMER(4),
|
|
.gpio = CH_LS_GPIO(4),
|
|
},
|
|
.ch_cfg[13] = {
|
|
.timer = CH_LS_TIMER(5),
|
|
.gpio = CH_LS_GPIO(5),
|
|
},
|
|
.ch_cfg[14] = {
|
|
.timer = CH_LS_TIMER(6),
|
|
.gpio = CH_LS_GPIO(6),
|
|
},
|
|
.ch_cfg[15] = {
|
|
.timer = CH_LS_TIMER(7),
|
|
.gpio = CH_LS_GPIO(7),
|
|
},
|
|
};
|
|
|
|
DEVICE_AND_API_INIT(pwm_led_esp32_0, CONFIG_PWM_LED_ESP32_DEV_NAME_0,
|
|
pwm_led_esp32_init, NULL, &pwm_led_esp32_config,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&pwm_led_esp32_api);
|