160 lines
2.9 KiB
Plaintext
160 lines
2.9 KiB
Plaintext
/*
|
|
* Copyright (c) 2018 Endre Karlson
|
|
* Copyright (c) 2018 Peter Bigot Consulting, LLC
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
/* Assignments common to all Feather-based Particle mesh boards.
|
|
*
|
|
* NOTE: This file is replicated in particle_{argon,boron,xenon}.
|
|
* Changes should be made in all instances. */
|
|
|
|
/ {
|
|
aliases {
|
|
led0 = &user_led;
|
|
led1 = &status_red;
|
|
led2 = &status_green;
|
|
led3 = &status_blue;
|
|
sw0 = &mode_button;
|
|
sw1 = &reset_button;
|
|
};
|
|
|
|
chosen {
|
|
zephyr,console = &uart0;
|
|
zephyr,uart-mcumgr = &uart0;
|
|
zephyr,shell-uart = &uart0;
|
|
zephyr,sram = &sram0;
|
|
zephyr,flash = &flash0;
|
|
zephyr,code-partition = &slot0_partition;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
user_led: led_0 {
|
|
gpios = <&gpio1 12 0>;
|
|
label = "User LED";
|
|
};
|
|
status_red: led_1 {
|
|
gpios = <&gpio0 13 0>;
|
|
label = "Red LED";
|
|
};
|
|
status_green: led_2 {
|
|
gpios = <&gpio0 14 0>;
|
|
label = "Green LED";
|
|
};
|
|
status_blue: led_3 {
|
|
gpios = <&gpio0 15 0>;
|
|
label = "Blue LED";
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
mode_button: button_0 {
|
|
gpios = <&gpio0 11 GPIO_PUD_PULL_UP>;
|
|
label = "Mode Button";
|
|
};
|
|
|
|
reset_button: button_1 {
|
|
gpios = <&gpio0 18 GPIO_PUD_PULL_UP>;
|
|
label = "Reset Button";
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc { /* feather ADC */
|
|
status = "ok";
|
|
};
|
|
|
|
|
|
&flash0 {
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
boot_partition: partition@0 {
|
|
label = "mcuboot";
|
|
reg = <0x000000000 0x0000C000>;
|
|
};
|
|
slot0_partition: partition@c000 {
|
|
label = "image-0";
|
|
reg = <0x0000C000 0x000067000>;
|
|
};
|
|
slot1_partition: partition@73000 {
|
|
label = "image-1";
|
|
reg = <0x00073000 0x000067000>;
|
|
};
|
|
scratch_partition: partition@da000 {
|
|
label = "image-scratch";
|
|
reg = <0x000da000 0x0001e000>;
|
|
};
|
|
|
|
/*
|
|
* The flash starting at 0x000f8000 and ending at
|
|
* 0x000fffff is reserved for use by the application.
|
|
*/
|
|
|
|
/* Storage partition will be used by FCB/NFFS/NVS if enabled. */
|
|
storage_partition: partition@f8000 {
|
|
label = "storage";
|
|
reg = <0x000f8000 0x00008000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpio0 {
|
|
status ="ok";
|
|
};
|
|
|
|
&gpio1 {
|
|
status ="ok";
|
|
};
|
|
|
|
&gpiote {
|
|
status ="ok";
|
|
};
|
|
|
|
&i2c0 { /* feather I2C */
|
|
status = "ok";
|
|
clock-frequency = <I2C_BITRATE_FAST>;
|
|
sda-pin = <26>;
|
|
scl-pin = <27>;
|
|
};
|
|
|
|
/* TWI1 used on Boron; also see mesh_feather_spi1_spi1.dtsi */
|
|
|
|
&spi2 { /* dedicated MX25L */
|
|
status = "ok";
|
|
sck-pin = <19>;
|
|
mosi-pin = <20>;
|
|
miso-pin = <21>;
|
|
cs-gpios = <&gpio0 17 0>;
|
|
gd25q32c@0 {
|
|
compatible = "jedec,spi-nor";
|
|
label = "GD25Q32C";
|
|
reg = <0>;
|
|
spi-max-frequency = <80000000>;
|
|
wp-gpios = <&gpio0 22 0>;
|
|
hold-gpios = <&gpio0 23 0>;
|
|
jedec-id = <0xc2 0x20 0x16>;
|
|
};
|
|
};
|
|
|
|
/* see mesh_feather_spi1_spi3.dtsi */
|
|
|
|
&uart0 { /* feather UART1 */
|
|
compatible = "nordic,nrf-uarte";
|
|
current-speed = <115200>;
|
|
status = "ok";
|
|
tx-pin = <6>;
|
|
rx-pin = <8>;
|
|
/* optional mesh_feather_uart1_rtscts.dtsi */
|
|
};
|
|
|
|
&usbd {
|
|
compatible = "nordic,nrf-usbd";
|
|
status = "ok";
|
|
};
|