197 lines
4.6 KiB
C
197 lines
4.6 KiB
C
/*
|
|
* Copyright (c) 2018 Intel Corporation
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT nios2_i2c
|
|
|
|
#include <errno.h>
|
|
#include <drivers/i2c.h>
|
|
#include <soc.h>
|
|
#include <sys/util.h>
|
|
#include <altera_common.h>
|
|
#include "altera_avalon_i2c.h"
|
|
|
|
#define LOG_LEVEL CONFIG_I2C_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(i2c_nios2);
|
|
|
|
#define NIOS2_I2C_TIMEOUT_USEC 1000
|
|
|
|
#define DEV_CFG(dev) \
|
|
((struct i2c_nios2_config *)(dev)->config)
|
|
|
|
struct i2c_nios2_config {
|
|
ALT_AVALON_I2C_DEV_t i2c_dev;
|
|
IRQ_DATA_t irq_data;
|
|
struct k_sem sem_lock;
|
|
};
|
|
|
|
static int i2c_nios2_configure(const struct device *dev, uint32_t dev_config)
|
|
{
|
|
struct i2c_nios2_config *config = DEV_CFG(dev);
|
|
int32_t rc = 0;
|
|
|
|
k_sem_take(&config->sem_lock, K_FOREVER);
|
|
if (!(I2C_MODE_MASTER & dev_config)) {
|
|
LOG_ERR("i2c config mode error\n");
|
|
rc = -EINVAL;
|
|
goto i2c_cfg_err;
|
|
}
|
|
|
|
if (I2C_ADDR_10_BITS & dev_config) {
|
|
LOG_ERR("i2c config addressing error\n");
|
|
rc = -EINVAL;
|
|
goto i2c_cfg_err;
|
|
}
|
|
|
|
if (I2C_SPEED_GET(dev_config) != I2C_SPEED_STANDARD) {
|
|
LOG_ERR("i2c config speed error\n");
|
|
rc = -EINVAL;
|
|
goto i2c_cfg_err;
|
|
}
|
|
|
|
alt_avalon_i2c_init(&config->i2c_dev);
|
|
|
|
i2c_cfg_err:
|
|
k_sem_give(&config->sem_lock);
|
|
return rc;
|
|
}
|
|
|
|
static int i2c_nios2_transfer(const struct device *dev, struct i2c_msg *msgs,
|
|
uint8_t num_msgs, uint16_t addr)
|
|
{
|
|
struct i2c_nios2_config *config = DEV_CFG(dev);
|
|
ALT_AVALON_I2C_STATUS_CODE status;
|
|
uint32_t restart, stop;
|
|
int32_t i, timeout, rc = 0;
|
|
|
|
k_sem_take(&config->sem_lock, K_FOREVER);
|
|
/* register the optional interrupt callback */
|
|
alt_avalon_i2c_register_optional_irq_handler(
|
|
&config->i2c_dev, &config->irq_data);
|
|
|
|
/* Iterate over all the messages */
|
|
for (i = 0; i < num_msgs; i++) {
|
|
|
|
/* convert restart flag */
|
|
if (msgs->flags & I2C_MSG_RESTART) {
|
|
restart = ALT_AVALON_I2C_RESTART;
|
|
} else {
|
|
restart = ALT_AVALON_I2C_NO_RESTART;
|
|
}
|
|
|
|
/* convert stop flag */
|
|
if (msgs->flags & I2C_MSG_STOP) {
|
|
stop = ALT_AVALON_I2C_STOP;
|
|
} else {
|
|
stop = ALT_AVALON_I2C_NO_STOP;
|
|
}
|
|
|
|
/* Set the slave device address */
|
|
alt_avalon_i2c_master_target_set(&config->i2c_dev, addr);
|
|
|
|
/* Start the transfer */
|
|
if (msgs->flags & I2C_MSG_READ) {
|
|
status = alt_avalon_i2c_master_receive_using_interrupts(
|
|
&config->i2c_dev,
|
|
msgs->buf, msgs->len,
|
|
restart, stop);
|
|
} else {
|
|
status = alt_avalon_i2c_master_transmit_using_interrupts
|
|
(&config->i2c_dev,
|
|
msgs->buf, msgs->len,
|
|
restart, stop);
|
|
}
|
|
|
|
/* Return an error if the transfer didn't
|
|
* start successfully e.g., if the bus was busy
|
|
*/
|
|
if (status != ALT_AVALON_I2C_SUCCESS) {
|
|
LOG_ERR("i2c transfer error %lu\n", status);
|
|
rc = -EIO;
|
|
goto i2c_transfer_err;
|
|
}
|
|
|
|
timeout = NIOS2_I2C_TIMEOUT_USEC;
|
|
while (timeout) {
|
|
k_busy_wait(1);
|
|
status = alt_avalon_i2c_interrupt_transaction_status(
|
|
&config->i2c_dev);
|
|
if (status == ALT_AVALON_I2C_SUCCESS) {
|
|
break;
|
|
}
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout <= 0) {
|
|
LOG_ERR("i2c busy or timeout error %lu\n", status);
|
|
rc = -EIO;
|
|
goto i2c_transfer_err;
|
|
}
|
|
|
|
/* move to the next message */
|
|
msgs++;
|
|
}
|
|
|
|
i2c_transfer_err:
|
|
alt_avalon_i2c_disable(&config->i2c_dev);
|
|
k_sem_give(&config->sem_lock);
|
|
return rc;
|
|
}
|
|
|
|
static void i2c_nios2_isr(const struct device *dev)
|
|
{
|
|
struct i2c_nios2_config *config = DEV_CFG(dev);
|
|
|
|
/* Call Altera HAL driver ISR */
|
|
alt_handle_irq(&config->i2c_dev, DT_INST_IRQN(0));
|
|
}
|
|
|
|
static int i2c_nios2_init(const struct device *dev);
|
|
|
|
static struct i2c_driver_api i2c_nios2_driver_api = {
|
|
.configure = i2c_nios2_configure,
|
|
.transfer = i2c_nios2_transfer,
|
|
};
|
|
|
|
static struct i2c_nios2_config i2c_nios2_cfg = {
|
|
.i2c_dev = {
|
|
.i2c_base = (alt_u32 *)DT_INST_REG_ADDR(0),
|
|
.irq_controller_ID = I2C_0_IRQ_INTERRUPT_CONTROLLER_ID,
|
|
.irq_ID = DT_INST_IRQN(0),
|
|
.ip_freq_in_hz = DT_INST_PROP(0, clock_frequency),
|
|
},
|
|
};
|
|
|
|
DEVICE_DT_INST_DEFINE(0, &i2c_nios2_init, NULL,
|
|
NULL, &i2c_nios2_cfg,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&i2c_nios2_driver_api);
|
|
|
|
static int i2c_nios2_init(const struct device *dev)
|
|
{
|
|
struct i2c_nios2_config *config = DEV_CFG(dev);
|
|
int rc;
|
|
|
|
/* initialize semaphore */
|
|
k_sem_init(&config->sem_lock, 1, 1);
|
|
|
|
rc = i2c_nios2_configure(dev,
|
|
I2C_MODE_MASTER |
|
|
I2C_SPEED_SET(I2C_SPEED_STANDARD));
|
|
if (rc) {
|
|
LOG_ERR("i2c configure failed %d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
/* clear ISR register content */
|
|
alt_avalon_i2c_int_clear(&config->i2c_dev,
|
|
ALT_AVALON_I2C_ISR_ALL_CLEARABLE_INTS_MSK);
|
|
IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority),
|
|
i2c_nios2_isr, DEVICE_DT_INST_GET(0), 0);
|
|
irq_enable(DT_INST_IRQN(0));
|
|
return 0;
|
|
}
|