229 lines
5.1 KiB
C
229 lines
5.1 KiB
C
/*
|
|
* Copyright (c) 2018 Henrik Brix Andersen <henrik@brixandersen.dk>
|
|
* Copyright (c) 2017 Google LLC.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <soc.h>
|
|
#include <watchdog.h>
|
|
|
|
#define LOG_LEVEL CONFIG_WDT_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(wdt_sam0);
|
|
|
|
#define WDT_REGS ((Wdt *)DT_ATMEL_SAM0_WATCHDOG_0_BASE_ADDRESS)
|
|
|
|
struct wdt_sam0_dev_data {
|
|
wdt_callback_t cb;
|
|
bool timeout_valid;
|
|
};
|
|
|
|
static struct device DEVICE_NAME_GET(wdt_sam0);
|
|
|
|
static struct wdt_sam0_dev_data wdt_sam0_data = { 0 };
|
|
|
|
static void wdt_sam0_wait_synchronization(void)
|
|
{
|
|
while (WDT_REGS->STATUS.bit.SYNCBUSY) {
|
|
}
|
|
}
|
|
|
|
static u32_t wdt_sam0_timeout_to_wdt_period(u32_t timeout_ms)
|
|
{
|
|
u32_t next_pow2;
|
|
u32_t cycles;
|
|
|
|
/* Calculate number of clock cycles @ 1.024 kHz input clock */
|
|
cycles = (timeout_ms * 1024U) / 1000;
|
|
|
|
/* Minimum wdt period is 8 clock cycles (register value 0) */
|
|
if (cycles <= 8U)
|
|
return 0;
|
|
|
|
/* Round up to next pow2 and calculate the register value */
|
|
next_pow2 = (1ULL << 32) >> __builtin_clz(cycles - 1);
|
|
return find_msb_set(next_pow2 >> 4);
|
|
}
|
|
|
|
static void wdt_sam0_isr(struct device *dev)
|
|
{
|
|
struct wdt_sam0_dev_data *data = dev->driver_data;
|
|
|
|
WDT_REGS->INTFLAG.reg = WDT_INTFLAG_EW;
|
|
if (data->cb != NULL) {
|
|
data->cb(dev, 0);
|
|
}
|
|
}
|
|
|
|
static int wdt_sam0_setup(struct device *dev, u8_t options)
|
|
{
|
|
struct wdt_sam0_dev_data *data = dev->driver_data;
|
|
|
|
if (WDT_REGS->CTRL.reg == WDT_CTRL_ENABLE) {
|
|
LOG_ERR("Watchdog already setup");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!data->timeout_valid) {
|
|
LOG_ERR("No valid timeout installed");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (options & WDT_OPT_PAUSE_IN_SLEEP) {
|
|
LOG_ERR("Pause in sleep not supported");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (options & WDT_OPT_PAUSE_HALTED_BY_DBG) {
|
|
LOG_ERR("Pause when halted by debugger not supported");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/* Enable watchdog */
|
|
WDT_REGS->CTRL.bit.ENABLE = 1;
|
|
wdt_sam0_wait_synchronization();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_sam0_disable(struct device *dev)
|
|
{
|
|
if (!WDT_REGS->CTRL.bit.ENABLE) {
|
|
LOG_ERR("Watchdog not enabled");
|
|
return -EFAULT;
|
|
}
|
|
|
|
WDT_REGS->CTRL.bit.ENABLE = 0;
|
|
wdt_sam0_wait_synchronization();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_sam0_install_timeout(struct device *dev,
|
|
const struct wdt_timeout_cfg *cfg)
|
|
{
|
|
struct wdt_sam0_dev_data *data = dev->driver_data;
|
|
u32_t window, per;
|
|
|
|
/* CONFIG is enable protected, error out if already enabled */
|
|
if (WDT_REGS->CTRL.bit.ENABLE) {
|
|
LOG_ERR("Watchdog already setup");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (cfg->flags != WDT_FLAG_RESET_SOC) {
|
|
LOG_ERR("Only SoC reset supported");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (cfg->window.max == 0) {
|
|
LOG_ERR("Upper limit timeout out of range");
|
|
return -EINVAL;
|
|
}
|
|
|
|
per = wdt_sam0_timeout_to_wdt_period(cfg->window.max);
|
|
if (per > WDT_CONFIG_PER_16K_Val) {
|
|
LOG_ERR("Upper limit timeout out of range");
|
|
goto timeout_invalid;
|
|
}
|
|
|
|
if (cfg->window.min) {
|
|
/* Window mode */
|
|
window = wdt_sam0_timeout_to_wdt_period(cfg->window.min);
|
|
if (window > WDT_CONFIG_PER_8K_Val) {
|
|
LOG_ERR("Lower limit timeout out of range");
|
|
goto timeout_invalid;
|
|
}
|
|
if (per <= window) {
|
|
/* Ensure we have a window */
|
|
per = window + 1;
|
|
}
|
|
WDT_REGS->CTRL.bit.WEN = 1;
|
|
wdt_sam0_wait_synchronization();
|
|
} else {
|
|
/* Normal mode */
|
|
if (cfg->callback) {
|
|
if (per == WDT_CONFIG_PER_8_Val) {
|
|
/* Ensure we have time for the early warning */
|
|
per += 1U;
|
|
}
|
|
WDT_REGS->EWCTRL.bit.EWOFFSET = per - 1U;
|
|
}
|
|
window = WDT_CONFIG_PER_8_Val;
|
|
WDT_REGS->CTRL.bit.WEN = 0;
|
|
wdt_sam0_wait_synchronization();
|
|
}
|
|
|
|
WDT_REGS->CONFIG.reg = WDT_CONFIG_WINDOW(window) | WDT_CONFIG_PER(per);
|
|
wdt_sam0_wait_synchronization();
|
|
|
|
/* Only enable IRQ if a callback was provided */
|
|
data->cb = cfg->callback;
|
|
if (data->cb) {
|
|
WDT_REGS->INTENSET.reg = WDT_INTENSET_EW;
|
|
} else {
|
|
WDT_REGS->INTENCLR.reg = WDT_INTENCLR_EW;
|
|
WDT_REGS->INTFLAG.reg = WDT_INTFLAG_EW;
|
|
}
|
|
|
|
data->timeout_valid = true;
|
|
|
|
return 0;
|
|
|
|
timeout_invalid:
|
|
data->timeout_valid = false;
|
|
data->cb = NULL;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int wdt_sam0_feed(struct device *dev, int channel_id)
|
|
{
|
|
struct wdt_sam0_dev_data *data = dev->driver_data;
|
|
|
|
if (!data->timeout_valid) {
|
|
LOG_ERR("No valid timeout installed");
|
|
return -EINVAL;
|
|
}
|
|
|
|
WDT_REGS->CLEAR.reg = WDT_CLEAR_CLEAR_KEY_Val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct wdt_driver_api wdt_sam0_api = {
|
|
.setup = wdt_sam0_setup,
|
|
.disable = wdt_sam0_disable,
|
|
.install_timeout = wdt_sam0_install_timeout,
|
|
.feed = wdt_sam0_feed,
|
|
};
|
|
|
|
static int wdt_sam0_init(struct device *dev)
|
|
{
|
|
#ifdef CONFIG_WDT_DISABLE_AT_BOOT
|
|
/* Ignore any errors */
|
|
wdt_sam0_disable(dev);
|
|
#endif
|
|
/* Enable APB clock */
|
|
PM->APBAMASK.bit.WDT_ = 1;
|
|
|
|
/* Connect to GCLK2 (~1.024 kHz) */
|
|
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_WDT
|
|
| GCLK_CLKCTRL_GEN_GCLK2
|
|
| GCLK_CLKCTRL_CLKEN;
|
|
|
|
IRQ_CONNECT(DT_ATMEL_SAM0_WATCHDOG_0_IRQ_0,
|
|
DT_ATMEL_SAM0_WATCHDOG_0_IRQ_0_PRIORITY, wdt_sam0_isr,
|
|
DEVICE_GET(wdt_sam0), 0);
|
|
irq_enable(DT_ATMEL_SAM0_WATCHDOG_0_IRQ_0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct wdt_sam0_dev_data wdt_sam0_data;
|
|
|
|
DEVICE_AND_API_INIT(wdt_sam0, DT_ATMEL_SAM0_WATCHDOG_0_LABEL, wdt_sam0_init,
|
|
&wdt_sam0_data, NULL, PRE_KERNEL_1,
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &wdt_sam0_api);
|