55 lines
1.5 KiB
YAML
55 lines
1.5 KiB
YAML
# Copyright (c) 2023 Andriy Gelman
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: |
|
|
An external clock signal driven by a PWM pin.
|
|
|
|
The devicetree must define a clock node:
|
|
|
|
pwmclock: pwmclock {
|
|
status = "okay";
|
|
compatible = "pwm-clock";
|
|
#clock-cells = <1>;
|
|
pwms = <&pwm_ccu40 2 PWM_HZ(1000000) PWM_POLARITY_NORMAL>;
|
|
};
|
|
|
|
This will create a device node with a clock-controller
|
|
API. Internally the device node will use PWM API to start the
|
|
clock signals at 1MHz. Note that the PWM_HZ() macro converts the
|
|
frequency to time (nanoseconds units). This may result in rounding
|
|
errors if the clock frequency is not an integer number of nanoseconds.
|
|
The clock frequency can be explicitly set using the clock-frequency
|
|
property.
|
|
|
|
The PWM node may need to be properly configured to generate
|
|
the target period (i.e. using prescaler options). See the documentation
|
|
for the target PWM driver.
|
|
|
|
compatible: "pwm-clock"
|
|
|
|
include: [clock-controller.yaml, base.yaml]
|
|
|
|
properties:
|
|
pwms:
|
|
type: phandle-array
|
|
required: true
|
|
|
|
clock-frequency:
|
|
type: int
|
|
description: |
|
|
Exact output frequency, in case the PWM period is not exact
|
|
but was rounded to nanoseconds. This property is optional.
|
|
|
|
pwm-on-delay:
|
|
type: int
|
|
default: 0
|
|
description:
|
|
Optional blocking delay in micro seconds to make sure that the PWM
|
|
clock has started after returning from clock_control_on().
|
|
|
|
"#clock-cells":
|
|
const: 1
|
|
|
|
clock-cells:
|
|
- id
|