389 lines
8.8 KiB
Plaintext
389 lines
8.8 KiB
Plaintext
/*
|
|
* Copyright (c) 2018 Prevas A/S
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <mem.h>
|
|
#include <arm/armv7-m.dtsi>
|
|
#include <zephyr/dt-bindings/clock/kinetis_sim.h>
|
|
#include <zephyr/dt-bindings/clock/kinetis_mcg.h>
|
|
#include <zephyr/dt-bindings/gpio/gpio.h>
|
|
#include <zephyr/dt-bindings/i2c/i2c.h>
|
|
|
|
/ {
|
|
chosen {
|
|
zephyr,entropy = &rnga;
|
|
zephyr,flash-controller = &ftfe;
|
|
};
|
|
|
|
aliases {
|
|
watchdog0 = &wdog;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-m4f";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
/* The on-chip SRAM is split into SRAM_L and SRAM_U regions that form a
|
|
* contiguous block in the memory map, however misaligned accesses
|
|
* across the 0x2000_0000 boundary are not supported in the Arm
|
|
* Cortex-M4 architecture. For clarity and to avoid the temptation for
|
|
* someone to extend sram0 without solving this issue, we define two
|
|
* separate memory nodes here and only use the upper one for now. A
|
|
* potential solution has been proposed in binutils:
|
|
* https://sourceware.org/ml/binutils/2017-02/msg00250.html
|
|
*/
|
|
sram_l: memory@1fff0000 {
|
|
compatible = "zephyr,memory-region", "mmio-sram";
|
|
reg = <0x1fff0000 DT_SIZE_K(64)>;
|
|
zephyr,memory-region = "SRAML";
|
|
};
|
|
|
|
sram0: memory@20000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x20000000 DT_SIZE_K(64)>;
|
|
};
|
|
|
|
/* Dummy pinctrl node, filled with pin mux options at board level */
|
|
pinctrl: pinctrl {
|
|
compatible = "nxp,kinetis-pinctrl";
|
|
status = "okay";
|
|
};
|
|
|
|
soc {
|
|
mcg: clock-controller@40064000 {
|
|
compatible = "nxp,kinetis-mcg";
|
|
reg = <0x40064000 0xd>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
osc: clock-controller@40065000 {
|
|
compatible = "nxp,k22f-osc";
|
|
reg = <0x40065000 0x4>;
|
|
|
|
enable-external-reference;
|
|
};
|
|
|
|
rtc: rtc@4003d000 {
|
|
compatible = "nxp,k22f-rtc";
|
|
reg = <0x4003d000 0x808>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
sim: sim@40047000 {
|
|
compatible = "nxp,kinetis-sim";
|
|
reg = <0x40047000 0x1060>;
|
|
#clock-cells = <3>;
|
|
|
|
core_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&mcg KINETIS_MCG_OUT_CLK>;
|
|
clock-div = <1>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
bus_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&mcg KINETIS_MCG_OUT_CLK>;
|
|
clock-div = <2>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
flexbus_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&mcg KINETIS_MCG_OUT_CLK>;
|
|
clock-div = <3>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
flash_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&mcg KINETIS_MCG_OUT_CLK>;
|
|
clock-div = <3>;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ftfe: flash-controller@40020000 {
|
|
compatible = "nxp,kinetis-ftfe";
|
|
reg = <0x40020000 0x18>;
|
|
interrupts = <18 0>, <19 0>;
|
|
interrupt-names = "command-complete", "read-collision";
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
flash0: flash@0 {
|
|
compatible = "soc-nv-flash";
|
|
reg = <0 DT_SIZE_M(1)>;
|
|
erase-block-size = <2048>;
|
|
write-block-size = <8>;
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@40066000 {
|
|
compatible = "nxp,kinetis-i2c";
|
|
clock-frequency = <I2C_BITRATE_STANDARD>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x40066000 0x1000>;
|
|
interrupts = <24 0>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@40067000 {
|
|
compatible = "nxp,kinetis-i2c";
|
|
clock-frequency = <I2C_BITRATE_STANDARD>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x40067000 0x1000>;
|
|
interrupts = <25 0>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: uart@4006a000 {
|
|
compatible = "nxp,kinetis-uart";
|
|
reg = <0x4006a000 0x1000>;
|
|
interrupts = <31 0>, <32 0>;
|
|
interrupt-names = "status", "error";
|
|
clocks = <&sim KINETIS_SIM_CORESYS_CLK 0x1034 10>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: uart@4006b000 {
|
|
compatible = "nxp,kinetis-uart";
|
|
reg = <0x4006b000 0x1000>;
|
|
interrupts = <33 0>, <34 0>;
|
|
interrupt-names = "status", "error";
|
|
clocks = <&sim KINETIS_SIM_CORESYS_CLK 0x1034 11>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: uart@4006c000 {
|
|
compatible = "nxp,kinetis-uart";
|
|
reg = <0x4006c000 0x1000>;
|
|
interrupts = <35 0>, <36 0>;
|
|
interrupt-names = "status", "error";
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 12>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: uart@4006d000 {
|
|
compatible = "nxp,kinetis-uart";
|
|
reg = <0x4006d000 0x1000>;
|
|
interrupts = <37 0>, <38 0>;
|
|
interrupt-names = "status", "error";
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 13>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
porta: pinmux@40049000 {
|
|
compatible = "nxp,kinetis-pinmux";
|
|
reg = <0x40049000 0xd0>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 9>;
|
|
};
|
|
|
|
portb: pinmux@4004a000 {
|
|
compatible = "nxp,kinetis-pinmux";
|
|
reg = <0x4004a000 0xd0>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 10>;
|
|
};
|
|
|
|
portc: pinmux@4004b000 {
|
|
compatible = "nxp,kinetis-pinmux";
|
|
reg = <0x4004b000 0xd0>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 11>;
|
|
};
|
|
|
|
portd: pinmux@4004c000 {
|
|
compatible = "nxp,kinetis-pinmux";
|
|
reg = <0x4004c000 0xd0>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 12>;
|
|
};
|
|
|
|
porte: pinmux@4004d000 {
|
|
compatible = "nxp,kinetis-pinmux";
|
|
reg = <0x4004d000 0xd0>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 13>;
|
|
};
|
|
|
|
gpioa: gpio@400ff000 {
|
|
compatible = "nxp,kinetis-gpio";
|
|
status = "disabled";
|
|
reg = <0x400ff000 0x40>;
|
|
interrupts = <59 2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
nxp,kinetis-port = <&porta>;
|
|
};
|
|
|
|
gpiob: gpio@400ff040 {
|
|
compatible = "nxp,kinetis-gpio";
|
|
status = "disabled";
|
|
reg = <0x400ff040 0x40>;
|
|
interrupts = <60 2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
nxp,kinetis-port = <&portb>;
|
|
};
|
|
|
|
gpioc: gpio@400ff080 {
|
|
compatible = "nxp,kinetis-gpio";
|
|
status = "disabled";
|
|
reg = <0x400ff080 0x40>;
|
|
interrupts = <61 2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
nxp,kinetis-port = <&portc>;
|
|
};
|
|
|
|
gpiod: gpio@400ff0c0 {
|
|
compatible = "nxp,kinetis-gpio";
|
|
status = "disabled";
|
|
reg = <0x400ff0c0 0x40>;
|
|
interrupts = <62 2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
nxp,kinetis-port = <&portd>;
|
|
};
|
|
|
|
gpioe: gpio@400ff100 {
|
|
compatible = "nxp,kinetis-gpio";
|
|
status = "disabled";
|
|
reg = <0x400ff100 0x40>;
|
|
interrupts = <63 2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
nxp,kinetis-port = <&porte>;
|
|
};
|
|
|
|
spi0: spi@4002c000 {
|
|
compatible = "nxp,kinetis-dspi";
|
|
reg = <0x4002c000 0x88>;
|
|
interrupts = <26 3>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x103C 12>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@4002d000 {
|
|
compatible = "nxp,kinetis-dspi";
|
|
reg = <0x4002d000 0x88>;
|
|
interrupts = <27 3>;
|
|
clocks = <&sim KINETIS_SIM_BUS_CLK 0x103C 13>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog: watchdog@40052000 {
|
|
compatible = "nxp,kinetis-wdog";
|
|
reg = <0x40052000 16>;
|
|
interrupts = <22 0>;
|
|
clocks = <&sim KINETIS_SIM_LPO_CLK 0 0>;
|
|
};
|
|
|
|
ftm0: ftm@40038000{
|
|
compatible = "nxp,kinetis-ftm";
|
|
reg = <0x40038000 0x98>;
|
|
interrupts = <42 0>;
|
|
clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>,
|
|
<&sim KINETIS_SIM_BUS_CLK 0x103C 24>;
|
|
prescaler = <16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ftm1: ftm@40039000{
|
|
compatible = "nxp,kinetis-ftm";
|
|
reg = <0x40039000 0x98>;
|
|
interrupts = <43 0>;
|
|
clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>,
|
|
<&sim KINETIS_SIM_BUS_CLK 0x103C 25>;
|
|
prescaler = <16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ftm2: ftm@4003a000{
|
|
compatible = "nxp,kinetis-ftm";
|
|
reg = <0x4003a000 0x98>;
|
|
interrupts = <44 0>;
|
|
clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>,
|
|
<&sim KINETIS_SIM_BUS_CLK 0x103C 26>;
|
|
prescaler = <16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ftm3: ftm@400b9000{
|
|
compatible = "nxp,kinetis-ftm";
|
|
reg = <0x400b9000 0x98>;
|
|
interrupts = <71 0>;
|
|
clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>,
|
|
<&sim KINETIS_SIM_BUS_CLK 0x103C 6>;
|
|
prescaler = <16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
adc0: adc@4003b000{
|
|
compatible = "nxp,kinetis-adc16";
|
|
reg = <0x4003b000 0x70>;
|
|
interrupts = <39 0>;
|
|
status = "disabled";
|
|
#io-channel-cells = <1>;
|
|
};
|
|
|
|
dac0: dac@4003f000 {
|
|
compatible = "nxp,kinetis-dac";
|
|
reg = <0x4003f000 0x1000>;
|
|
interrupts = <56 0>;
|
|
voltage-reference = <1>;
|
|
status = "disabled";
|
|
#io-channel-cells = <1>;
|
|
};
|
|
|
|
dac1: dac@40028000 {
|
|
compatible = "nxp,kinetis-dac";
|
|
reg = <0x40028000 0x1000>;
|
|
interrupts = <72 0>;
|
|
voltage-reference = <1>;
|
|
status = "disabled";
|
|
#io-channel-cells = <1>;
|
|
};
|
|
|
|
usbotg: usbd@40072000 {
|
|
compatible = "nxp,kinetis-usbd";
|
|
reg = <0x40072000 0x1000>;
|
|
interrupts = <53 1>;
|
|
interrupt-names = "usb_otg";
|
|
num-bidir-endpoints = <16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rnga: random@40029000 {
|
|
compatible = "nxp,kinetis-rnga";
|
|
reg = <0x40029000 0x1000>;
|
|
status = "okay";
|
|
interrupts = <23 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nvic {
|
|
arm,num-irq-priority-bits = <4>;
|
|
};
|