221 lines
6.0 KiB
C
221 lines
6.0 KiB
C
/*
|
|
* Copyright (c) 2018 Foundries.io
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT openisa_rv32m1_intmux
|
|
|
|
/**
|
|
* @file
|
|
* @brief RV32M1 INTMUX (interrupt multiplexer) driver
|
|
*
|
|
* This driver provides support for level 2 interrupts on the RV32M1
|
|
* SoC using the INTMUX peripheral.
|
|
*
|
|
* Each of the RI5CY and ZERO-RISCY cores has an INTMUX peripheral;
|
|
* INTMUX0 is wired to the RI5CY event unit interrupt table, while
|
|
* INTMUX1 is used with ZERO-RISCY.
|
|
*
|
|
* For this reason, only a single intmux device is declared here. The
|
|
* dtsi for each core needs to set up the intmux device and any
|
|
* associated IRQ numbers to work with this driver.
|
|
*/
|
|
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <zephyr/init.h>
|
|
#include <zephyr/irq.h>
|
|
#include <zephyr/irq_nextlevel.h>
|
|
#include <zephyr/sw_isr_table.h>
|
|
#include <soc.h>
|
|
#include <zephyr/dt-bindings/interrupt-controller/openisa-intmux.h>
|
|
|
|
/*
|
|
* CHn_VEC registers are offset by a value that is convenient if
|
|
* you're dealing with a Cortex-M NVIC vector table; we're not, so it
|
|
* needs to be subtracted out to get a useful value.
|
|
*/
|
|
#define VECN_OFFSET 48U
|
|
|
|
struct rv32m1_intmux_config {
|
|
INTMUX_Type *regs;
|
|
const struct device *clock_dev;
|
|
clock_control_subsys_t clock_subsys;
|
|
struct _isr_table_entry *isr_base;
|
|
};
|
|
|
|
#define DEV_REGS(dev) (((const struct rv32m1_intmux_config *)(dev->config))->regs)
|
|
|
|
/*
|
|
* <irq_nextlevel.h> API
|
|
*/
|
|
|
|
static void rv32m1_intmux_irq_enable(const struct device *dev, uint32_t irq)
|
|
{
|
|
INTMUX_Type *regs = DEV_REGS(dev);
|
|
uint32_t channel = rv32m1_intmux_channel(irq);
|
|
uint32_t line = rv32m1_intmux_line(irq);
|
|
|
|
regs->CHANNEL[channel].CHn_IER_31_0 |= BIT(line);
|
|
}
|
|
|
|
static void rv32m1_intmux_irq_disable(const struct device *dev, uint32_t irq)
|
|
{
|
|
INTMUX_Type *regs = DEV_REGS(dev);
|
|
uint32_t channel = rv32m1_intmux_channel(irq);
|
|
uint32_t line = rv32m1_intmux_line(irq);
|
|
|
|
regs->CHANNEL[channel].CHn_IER_31_0 &= ~BIT(line);
|
|
}
|
|
|
|
static uint32_t rv32m1_intmux_get_state(const struct device *dev)
|
|
{
|
|
INTMUX_Type *regs = DEV_REGS(dev);
|
|
size_t i;
|
|
|
|
for (i = 0; i < INTMUX_CHn_IER_31_0_COUNT; i++) {
|
|
if (regs->CHANNEL[i].CHn_IER_31_0) {
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv32m1_intmux_get_line_state(const struct device *dev,
|
|
unsigned int irq)
|
|
{
|
|
INTMUX_Type *regs = DEV_REGS(dev);
|
|
uint32_t channel = rv32m1_intmux_channel(irq);
|
|
uint32_t line = rv32m1_intmux_line(irq);
|
|
|
|
if ((regs->CHANNEL[channel].CHn_IER_31_0 & BIT(line)) != 0) {
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* IRQ handling.
|
|
*/
|
|
|
|
#define ISR_ENTRY(channel, line) \
|
|
((channel) * CONFIG_MAX_IRQ_PER_AGGREGATOR + line)
|
|
|
|
static void rv32m1_intmux_isr(const void *arg)
|
|
{
|
|
const struct device *const dev = DEVICE_DT_INST_GET(0);
|
|
const struct rv32m1_intmux_config *config = dev->config;
|
|
INTMUX_Type *regs = DEV_REGS(dev);
|
|
uint32_t channel = POINTER_TO_UINT(arg);
|
|
uint32_t line = (regs->CHANNEL[channel].CHn_VEC >> 2);
|
|
struct _isr_table_entry *isr_base = config->isr_base;
|
|
struct _isr_table_entry *entry;
|
|
|
|
/*
|
|
* Make sure the vector is valid, there is a note of page 1243~1244
|
|
* of chapter 36 INTMUX of RV32M1 RM,
|
|
* Note: Unlike the NVIC, the INTMUX does not latch pending source
|
|
* interrupts. This means that the INTMUX output channel ISRs must
|
|
* check for and handle a 0 value of the CHn_VEC register to
|
|
* account for spurious interrupts.
|
|
*/
|
|
if (line < VECN_OFFSET) {
|
|
return;
|
|
}
|
|
|
|
entry = &isr_base[ISR_ENTRY(channel, (line - VECN_OFFSET))];
|
|
entry->isr(entry->arg);
|
|
}
|
|
|
|
/*
|
|
* Instance and initialization
|
|
*/
|
|
|
|
static const struct irq_next_level_api rv32m1_intmux_apis = {
|
|
.intr_enable = rv32m1_intmux_irq_enable,
|
|
.intr_disable = rv32m1_intmux_irq_disable,
|
|
.intr_get_state = rv32m1_intmux_get_state,
|
|
.intr_get_line_state = rv32m1_intmux_get_line_state,
|
|
};
|
|
|
|
static const struct rv32m1_intmux_config rv32m1_intmux_cfg = {
|
|
.regs = (INTMUX_Type *)DT_INST_REG_ADDR(0),
|
|
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(0)),
|
|
.clock_subsys = UINT_TO_POINTER(DT_INST_CLOCKS_CELL(0, name)),
|
|
.isr_base = &_sw_isr_table[CONFIG_2ND_LVL_ISR_TBL_OFFSET],
|
|
};
|
|
|
|
static int rv32m1_intmux_init(const struct device *dev)
|
|
{
|
|
const struct rv32m1_intmux_config *config = dev->config;
|
|
INTMUX_Type *regs = DEV_REGS(dev);
|
|
size_t i;
|
|
|
|
if (!device_is_ready(config->clock_dev)) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Enable INTMUX clock. */
|
|
clock_control_on(config->clock_dev, config->clock_subsys);
|
|
|
|
/*
|
|
* Reset all channels, not just the ones we're configured to
|
|
* support. We don't want to continue to take level 2 IRQs
|
|
* enabled by bootloaders, for example.
|
|
*/
|
|
for (i = 0; i < INTMUX_CHn_CSR_COUNT; i++) {
|
|
regs->CHANNEL[i].CHn_CSR |= INTMUX_CHn_CSR_RST_MASK;
|
|
}
|
|
|
|
/* Connect and enable level 1 (channel) interrupts. */
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_0
|
|
IRQ_CONNECT(INTMUX_CH0_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(0), 0);
|
|
irq_enable(INTMUX_CH0_IRQ);
|
|
#endif
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_1
|
|
IRQ_CONNECT(INTMUX_CH1_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(1), 0);
|
|
irq_enable(INTMUX_CH1_IRQ);
|
|
#endif
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_2
|
|
IRQ_CONNECT(INTMUX_CH2_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(2), 0);
|
|
irq_enable(INTMUX_CH2_IRQ);
|
|
#endif
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_3
|
|
IRQ_CONNECT(INTMUX_CH3_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(3), 0);
|
|
irq_enable(INTMUX_CH3_IRQ);
|
|
#endif
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_4
|
|
IRQ_CONNECT(INTMUX_CH4_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(4), 0);
|
|
irq_enable(INTMUX_CH4_IRQ);
|
|
#endif
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_5
|
|
IRQ_CONNECT(INTMUX_CH5_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(5), 0);
|
|
irq_enable(INTMUX_CH5_IRQ);
|
|
#endif
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_6
|
|
IRQ_CONNECT(INTMUX_CH6_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(6), 0);
|
|
irq_enable(INTMUX_CH6_IRQ);
|
|
#endif
|
|
#ifdef CONFIG_RV32M1_INTMUX_CHANNEL_7
|
|
IRQ_CONNECT(INTMUX_CH7_IRQ, 0, rv32m1_intmux_isr,
|
|
UINT_TO_POINTER(7), 0);
|
|
irq_enable(INTMUX_CH7_IRQ);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEVICE_DT_INST_DEFINE(0, &rv32m1_intmux_init, NULL, NULL,
|
|
&rv32m1_intmux_cfg, PRE_KERNEL_1,
|
|
CONFIG_RV32M1_INTMUX_INIT_PRIORITY, &rv32m1_intmux_apis);
|