105 lines
3.4 KiB
C
105 lines
3.4 KiB
C
/* W5500 Stand-alone Ethernet Controller with SPI
|
|
*
|
|
* Copyright (c) 2020 Linumiz
|
|
* Author: Parthiban Nallathambi <parthiban@linumiz.com>
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <zephyr/drivers/gpio.h>
|
|
#include <zephyr/drivers/spi.h>
|
|
|
|
#ifndef _W5500_
|
|
#define _W5500_
|
|
|
|
/*
|
|
* W5500 common registers
|
|
*/
|
|
#define W5500_COMMON_REGS 0x0000
|
|
#define W5500_MR 0x0000 /* Mode Register */
|
|
#define W5500_GW 0x0001
|
|
#define MR_RST 0x80 /* S/W reset */
|
|
#define MR_PB 0x10 /* Ping block */
|
|
#define MR_AI 0x02 /* Address Auto-Increment */
|
|
#define MR_IND 0x01 /* Indirect mode */
|
|
#define W5500_SHAR 0x0009 /* Source MAC address */
|
|
#define W5500_IR 0x0015 /* Interrupt Register */
|
|
#define W5500_COMMON_REGS_LEN 0x0040
|
|
|
|
#define W5500_Sn_MR 0x0000 /* Sn Mode Register */
|
|
#define W5500_Sn_CR 0x0001 /* Sn Command Register */
|
|
#define W5500_Sn_IR 0x0002 /* Sn Interrupt Register */
|
|
#define W5500_Sn_SR 0x0003 /* Sn Status Register */
|
|
#define W5500_Sn_TX_FSR 0x0020 /* Sn Transmit free memory size */
|
|
#define W5500_Sn_TX_RD 0x0022 /* Sn Transmit memory read pointer */
|
|
#define W5500_Sn_TX_WR 0x0024 /* Sn Transmit memory write pointer */
|
|
#define W5500_Sn_RX_RSR 0x0026 /* Sn Receive free memory size */
|
|
#define W5500_Sn_RX_RD 0x0028 /* Sn Receive memory read pointer */
|
|
|
|
#define W5500_S0_REGS 0x10000
|
|
|
|
#define W5500_S0_MR (W5500_S0_REGS + W5500_Sn_MR)
|
|
#define S0_MR_MACRAW 0x04 /* MAC RAW mode */
|
|
#define S0_MR_MF 0x40 /* MAC Filter for W5500 */
|
|
#define W5500_S0_CR (W5500_S0_REGS + W5500_Sn_CR)
|
|
#define S0_CR_OPEN 0x01 /* OPEN command */
|
|
#define S0_CR_CLOSE 0x10 /* CLOSE command */
|
|
#define S0_CR_SEND 0x20 /* SEND command */
|
|
#define S0_CR_RECV 0x40 /* RECV command */
|
|
#define W5500_S0_IR (W5500_S0_REGS + W5500_Sn_IR)
|
|
#define S0_IR_SENDOK 0x10 /* complete sending */
|
|
#define S0_IR_RECV 0x04 /* receiving data */
|
|
#define W5500_S0_SR (W5500_S0_REGS + W5500_Sn_SR)
|
|
#define S0_SR_MACRAW 0x42 /* mac raw mode */
|
|
#define W5500_S0_TX_FSR (W5500_S0_REGS + W5500_Sn_TX_FSR)
|
|
#define W5500_S0_TX_RD (W5500_S0_REGS + W5500_Sn_TX_RD)
|
|
#define W5500_S0_TX_WR (W5500_S0_REGS + W5500_Sn_TX_WR)
|
|
#define W5500_S0_RX_RSR (W5500_S0_REGS + W5500_Sn_RX_RSR)
|
|
#define W5500_S0_RX_RD (W5500_S0_REGS + W5500_Sn_RX_RD)
|
|
#define W5500_S0_IMR (W5500_S0_REGS + W5500_Sn_IMR)
|
|
|
|
#define W5500_S0_MR_MF 7 /* MAC Filter for W5500 */
|
|
#define W5500_Sn_REGS_LEN 0x0040
|
|
#define W5500_SIMR 0x0018 /* Socket Interrupt Mask Register */
|
|
#define IR_S0 0x01
|
|
#define RTR_DEFAULT 2000
|
|
#define W5500_RTR 0x0019 /* Retry Time-value Register */
|
|
|
|
|
|
#define W5500_Sn_RXMEM_SIZE(n) \
|
|
(0x1001e + (n) * 0x40000) /* Sn RX Memory Size */
|
|
#define W5500_Sn_TXMEM_SIZE(n) \
|
|
(0x1001f + (n) * 0x40000) /* Sn TX Memory Size */
|
|
|
|
#define W5500_Sn_TX_MEM_START 0x20000
|
|
#define W5500_TX_MEM_SIZE 0x04000
|
|
#define W5500_Sn_RX_MEM_START 0x30000
|
|
#define W5500_RX_MEM_SIZE 0x04000
|
|
|
|
/* Delay for PHY write/read operations (25.6 us) */
|
|
#define W5500_PHY_ACCESS_DELAY 26U
|
|
struct w5500_config {
|
|
struct spi_dt_spec spi;
|
|
struct gpio_dt_spec interrupt;
|
|
struct gpio_dt_spec reset;
|
|
void (*config_func)(void);
|
|
uint8_t full_duplex;
|
|
int32_t timeout;
|
|
};
|
|
|
|
struct w5500_runtime {
|
|
struct net_if *iface;
|
|
|
|
K_THREAD_STACK_MEMBER(thread_stack,
|
|
CONFIG_ETH_W5500_RX_THREAD_STACK_SIZE);
|
|
struct k_thread thread;
|
|
uint8_t mac_addr[6];
|
|
struct gpio_callback gpio_cb;
|
|
struct k_sem tx_sem;
|
|
struct k_sem int_sem;
|
|
void (*generate_mac)(uint8_t *mac);
|
|
uint8_t buf[NET_ETH_MAX_FRAME_SIZE];
|
|
};
|
|
|
|
#endif /*_W5500_*/
|