132 lines
3.4 KiB
C
132 lines
3.4 KiB
C
/*
|
|
* Driver for Synopsys DesignWare MAC
|
|
*
|
|
* Copyright (c) 2021 BayLibre SAS
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* STM32H7X specific glue.
|
|
*/
|
|
|
|
|
|
#define LOG_MODULE_NAME dwmac_plat
|
|
#define LOG_LEVEL CONFIG_ETHERNET_LOG_LEVEL
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(LOG_MODULE_NAME);
|
|
|
|
/* be compatible with the HAL-based driver here */
|
|
#define DT_DRV_COMPAT st_stm32_ethernet
|
|
|
|
#include <sys/types.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/net/ethernet.h>
|
|
#include <ethernet/eth.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <zephyr/drivers/clock_control/stm32_clock_control.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <zephyr/irq.h>
|
|
|
|
#include "eth_dwmac_priv.h"
|
|
|
|
PINCTRL_DT_INST_DEFINE(0);
|
|
static const struct pinctrl_dev_config *eth0_pcfg =
|
|
PINCTRL_DT_INST_DEV_CONFIG_GET(0);
|
|
|
|
static const struct stm32_pclken pclken = {
|
|
.bus = DT_INST_CLOCKS_CELL_BY_NAME(0, stmmaceth, bus),
|
|
.enr = DT_INST_CLOCKS_CELL_BY_NAME(0, stmmaceth, bits),
|
|
};
|
|
static const struct stm32_pclken pclken_tx = {
|
|
.bus = DT_INST_CLOCKS_CELL_BY_NAME(0, mac_clk_tx, bus),
|
|
.enr = DT_INST_CLOCKS_CELL_BY_NAME(0, mac_clk_tx, bits),
|
|
};
|
|
static const struct stm32_pclken pclken_rx = {
|
|
.bus = DT_INST_CLOCKS_CELL_BY_NAME(0, mac_clk_rx, bus),
|
|
.enr = DT_INST_CLOCKS_CELL_BY_NAME(0, mac_clk_rx, bits),
|
|
};
|
|
|
|
int dwmac_bus_init(struct dwmac_priv *p)
|
|
{
|
|
uint32_t reg_addr, reg_val;
|
|
int ret;
|
|
|
|
p->clock = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
|
|
|
|
if (!device_is_ready(p->clock)) {
|
|
LOG_ERR("clock control device not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = clock_control_on(p->clock, (clock_control_subsys_t *)&pclken);
|
|
ret |= clock_control_on(p->clock, (clock_control_subsys_t *)&pclken_tx);
|
|
ret |= clock_control_on(p->clock, (clock_control_subsys_t *)&pclken_rx);
|
|
if (ret) {
|
|
LOG_ERR("Failed to enable ethernet clock");
|
|
return -EIO;
|
|
}
|
|
|
|
ret = pinctrl_apply_state(eth0_pcfg, PINCTRL_STATE_DEFAULT);
|
|
if (ret < 0) {
|
|
LOG_ERR("Could not configure ethernet pins");
|
|
return ret;
|
|
}
|
|
|
|
/* set SYSCFGEN in RCC_APB4ENR */
|
|
reg_addr = DT_REG_ADDR(DT_INST(0, st_stm32h7_rcc)) + 0xf4;
|
|
reg_val = sys_read32(reg_addr);
|
|
sys_write32(reg_val | BIT(1), reg_addr);
|
|
|
|
/* set RMII mode in SYSCFG_PMCR */
|
|
reg_addr = 0x58000404; /* no DT node? */
|
|
reg_val = sys_read32(reg_addr);
|
|
sys_write32(reg_val | 0x03800000, reg_addr);
|
|
|
|
p->base_addr = DT_INST_REG_ADDR(0);
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_NOCACHE_MEMORY)
|
|
#define __desc_mem __nocache __aligned(4)
|
|
#else
|
|
#error "missing memory attribute for descriptors"
|
|
#endif
|
|
|
|
/* Descriptor rings in uncached memory */
|
|
static struct dwmac_dma_desc dwmac_tx_descs[NB_TX_DESCS] __desc_mem;
|
|
static struct dwmac_dma_desc dwmac_rx_descs[NB_RX_DESCS] __desc_mem;
|
|
|
|
void dwmac_platform_init(struct dwmac_priv *p)
|
|
{
|
|
p->tx_descs = dwmac_tx_descs;
|
|
p->rx_descs = dwmac_rx_descs;
|
|
|
|
/* basic configuration for this platform */
|
|
REG_WRITE(MAC_CONF,
|
|
MAC_CONF_PS |
|
|
MAC_CONF_FES |
|
|
MAC_CONF_DM);
|
|
REG_WRITE(DMA_SYSBUS_MODE,
|
|
DMA_SYSBUS_MODE_AAL |
|
|
DMA_SYSBUS_MODE_FB);
|
|
|
|
/* set up IRQs (still masked for now) */
|
|
IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), dwmac_isr,
|
|
DEVICE_DT_INST_GET(0), 0);
|
|
irq_enable(DT_INST_IRQN(0));
|
|
|
|
/* create MAC address */
|
|
gen_random_mac(p->mac_addr, 0x00, 0x80, 0xE1);
|
|
}
|
|
|
|
/* Our private device instance */
|
|
static struct dwmac_priv dwmac_instance;
|
|
|
|
ETH_NET_DEVICE_DT_INST_DEFINE(0,
|
|
dwmac_probe,
|
|
NULL,
|
|
&dwmac_instance,
|
|
NULL,
|
|
CONFIG_ETH_INIT_PRIORITY,
|
|
&dwmac_api,
|
|
NET_ETH_MTU);
|