30 lines
1.3 KiB
Plaintext
30 lines
1.3 KiB
Plaintext
Fixed Regulator
|
|
###############
|
|
|
|
This application tests the fixed regulator driver in multiple
|
|
configurations. Like the GPIO driver test it requires that two GPIO
|
|
pins be shorted so that changes made to the state of one can be verified
|
|
by inspecting the other.
|
|
|
|
Unlike the GPIO driver test the behavior of a fixed regulator depends
|
|
heavily on the properties specified in its devicetree node. The
|
|
``compatible`` property causes the underlying driver implementation to
|
|
select between one that supports asynchronous transitions and an
|
|
optimized one synchronous transitions. The initial state of the
|
|
regulator, whether it can be changed, and enforced transition delays are
|
|
all controlled by devicetree properties.
|
|
|
|
Because the regulator can only be configured at system startup it is
|
|
necessary to test varying configurations in separate test sessions. The
|
|
``testcase.yaml`` file provides a variety of flags intended to cover the
|
|
various behaviors.
|
|
|
|
Only boards for which an overlay is present can pass this test. Boards
|
|
without an overlay, or for which the required wiring is not provided,
|
|
will fail with an error like this:
|
|
|
|
Assertion failed at ../src/main.c:182: test_preconditions: (precheck not equal to PC_OK)
|
|
precheck failed: active check failed
|
|
|
|
No special build options are required to make use of the overlay.
|