242 lines
5.6 KiB
C
242 lines
5.6 KiB
C
/*
|
|
* Copyright (c) 2021 Henrik Brix Andersen <henrik@brixandersen.dk>
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT neorv32_gpio
|
|
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/gpio.h>
|
|
#include <zephyr/drivers/syscon.h>
|
|
#include <zephyr/sys/sys_io.h>
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(gpio_neorv32, CONFIG_GPIO_LOG_LEVEL);
|
|
|
|
#include "gpio_utils.h"
|
|
|
|
/* Maximum number of GPIOs supported */
|
|
#define MAX_GPIOS 32
|
|
|
|
struct neorv32_gpio_config {
|
|
/* gpio_driver_config needs to be first */
|
|
struct gpio_driver_config common;
|
|
const struct device *syscon;
|
|
mm_reg_t input;
|
|
mm_reg_t output;
|
|
};
|
|
|
|
struct neorv32_gpio_data {
|
|
/* gpio_driver_data needs to be first */
|
|
struct gpio_driver_data common;
|
|
/* Shadow register for output */
|
|
uint32_t output;
|
|
};
|
|
|
|
static inline uint32_t neorv32_gpio_read(const struct device *dev)
|
|
{
|
|
const struct neorv32_gpio_config *config = dev->config;
|
|
|
|
return sys_read32(config->input);
|
|
}
|
|
|
|
static inline void neorv32_gpio_write(const struct device *dev, uint32_t val)
|
|
{
|
|
const struct neorv32_gpio_config *config = dev->config;
|
|
|
|
sys_write32(val, config->output);
|
|
}
|
|
|
|
static int neorv32_gpio_pin_configure(const struct device *dev, gpio_pin_t pin,
|
|
gpio_flags_t flags)
|
|
{
|
|
const struct neorv32_gpio_config *config = dev->config;
|
|
struct neorv32_gpio_data *data = dev->data;
|
|
unsigned int key;
|
|
|
|
if (!(BIT(pin) & config->common.port_pin_mask)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((flags & GPIO_SINGLE_ENDED) != 0) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if ((flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) != 0) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if ((flags & GPIO_OUTPUT) != 0) {
|
|
key = irq_lock();
|
|
|
|
if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0) {
|
|
data->output |= BIT(pin);
|
|
} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0) {
|
|
data->output &= ~BIT(pin);
|
|
}
|
|
|
|
neorv32_gpio_write(dev, data->output);
|
|
irq_unlock(key);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int neorv32_gpio_port_get_raw(const struct device *dev,
|
|
gpio_port_value_t *value)
|
|
{
|
|
*value = neorv32_gpio_read(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int neorv32_gpio_port_set_masked_raw(const struct device *dev,
|
|
gpio_port_pins_t mask,
|
|
gpio_port_value_t value)
|
|
{
|
|
struct neorv32_gpio_data *data = dev->data;
|
|
unsigned int key;
|
|
|
|
key = irq_lock();
|
|
data->output = (data->output & ~mask) | (mask & value);
|
|
neorv32_gpio_write(dev, data->output);
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int neorv32_gpio_port_set_bits_raw(const struct device *dev,
|
|
gpio_port_pins_t pins)
|
|
{
|
|
struct neorv32_gpio_data *data = dev->data;
|
|
unsigned int key;
|
|
|
|
key = irq_lock();
|
|
data->output |= pins;
|
|
neorv32_gpio_write(dev, data->output);
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int neorv32_gpio_port_clear_bits_raw(const struct device *dev,
|
|
gpio_port_pins_t pins)
|
|
{
|
|
struct neorv32_gpio_data *data = dev->data;
|
|
unsigned int key;
|
|
|
|
key = irq_lock();
|
|
data->output &= ~pins;
|
|
neorv32_gpio_write(dev, data->output);
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int neorv32_gpio_port_toggle_bits(const struct device *dev,
|
|
gpio_port_pins_t pins)
|
|
{
|
|
struct neorv32_gpio_data *data = dev->data;
|
|
unsigned int key;
|
|
|
|
key = irq_lock();
|
|
data->output ^= pins;
|
|
neorv32_gpio_write(dev, data->output);
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int neorv32_gpio_pin_interrupt_configure(const struct device *dev,
|
|
gpio_pin_t pin,
|
|
enum gpio_int_mode mode,
|
|
enum gpio_int_trig trig)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
ARG_UNUSED(pin);
|
|
ARG_UNUSED(mode);
|
|
ARG_UNUSED(trig);
|
|
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int neorv32_gpio_manage_callback(const struct device *dev,
|
|
struct gpio_callback *cb,
|
|
bool set)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
ARG_UNUSED(cb);
|
|
ARG_UNUSED(set);
|
|
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static uint32_t neorv32_gpio_get_pending_int(const struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int neorv32_gpio_init(const struct device *dev)
|
|
{
|
|
const struct neorv32_gpio_config *config = dev->config;
|
|
struct neorv32_gpio_data *data = dev->data;
|
|
uint32_t features;
|
|
int err;
|
|
|
|
if (!device_is_ready(config->syscon)) {
|
|
LOG_ERR("syscon device not ready");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = syscon_read_reg(config->syscon, NEORV32_SYSINFO_FEATURES, &features);
|
|
if (err < 0) {
|
|
LOG_ERR("failed to determine implemented features (err %d)", err);
|
|
return -EIO;
|
|
}
|
|
|
|
if ((features & NEORV32_SYSINFO_FEATURES_IO_GPIO) == 0) {
|
|
LOG_ERR("neorv32 gpio not supported");
|
|
return -ENODEV;
|
|
}
|
|
|
|
neorv32_gpio_write(dev, data->output);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct gpio_driver_api neorv32_gpio_driver_api = {
|
|
.pin_configure = neorv32_gpio_pin_configure,
|
|
.port_get_raw = neorv32_gpio_port_get_raw,
|
|
.port_set_masked_raw = neorv32_gpio_port_set_masked_raw,
|
|
.port_set_bits_raw = neorv32_gpio_port_set_bits_raw,
|
|
.port_clear_bits_raw = neorv32_gpio_port_clear_bits_raw,
|
|
.port_toggle_bits = neorv32_gpio_port_toggle_bits,
|
|
.pin_interrupt_configure = neorv32_gpio_pin_interrupt_configure,
|
|
.manage_callback = neorv32_gpio_manage_callback,
|
|
.get_pending_int = neorv32_gpio_get_pending_int,
|
|
};
|
|
|
|
#define NEORV32_GPIO_INIT(n) \
|
|
static struct neorv32_gpio_data neorv32_gpio_##n##_data = { \
|
|
.output = 0, \
|
|
}; \
|
|
\
|
|
static const struct neorv32_gpio_config neorv32_gpio_##n##_config = { \
|
|
.common = { \
|
|
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n) \
|
|
}, \
|
|
.syscon = DEVICE_DT_GET(DT_INST_PHANDLE(n, syscon)), \
|
|
.input = DT_INST_REG_ADDR_BY_NAME(n, input), \
|
|
.output = DT_INST_REG_ADDR_BY_NAME(n, output), \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(n, \
|
|
&neorv32_gpio_init, \
|
|
NULL, \
|
|
&neorv32_gpio_##n##_data, \
|
|
&neorv32_gpio_##n##_config, \
|
|
PRE_KERNEL_2, \
|
|
CONFIG_GPIO_INIT_PRIORITY, \
|
|
&neorv32_gpio_driver_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(NEORV32_GPIO_INIT)
|