416 lines
10 KiB
C
416 lines
10 KiB
C
/*
|
|
* Copyright (c) 2016 Freescale Semiconductor, Inc.
|
|
* Copyright (c) 2019, 2022 NXP
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT nxp_lpc_i2c
|
|
|
|
#include <errno.h>
|
|
#include <zephyr/drivers/i2c.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#include <fsl_i2c.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
|
|
#include <zephyr/logging/log.h>
|
|
#include <zephyr/irq.h>
|
|
LOG_MODULE_REGISTER(mcux_flexcomm);
|
|
|
|
#include "i2c-priv.h"
|
|
|
|
struct mcux_flexcomm_config {
|
|
I2C_Type *base;
|
|
const struct device *clock_dev;
|
|
clock_control_subsys_t clock_subsys;
|
|
void (*irq_config_func)(const struct device *dev);
|
|
uint32_t bitrate;
|
|
const struct pinctrl_dev_config *pincfg;
|
|
};
|
|
|
|
struct mcux_flexcomm_data {
|
|
i2c_master_handle_t handle;
|
|
struct k_sem device_sync_sem;
|
|
struct k_sem lock;
|
|
status_t callback_status;
|
|
#ifdef CONFIG_I2C_TARGET
|
|
i2c_slave_handle_t target_handle;
|
|
struct i2c_target_config *target_cfg;
|
|
bool target_attached;
|
|
bool first_read;
|
|
bool first_write;
|
|
bool is_write;
|
|
#endif
|
|
};
|
|
|
|
static int mcux_flexcomm_configure(const struct device *dev,
|
|
uint32_t dev_config_raw)
|
|
{
|
|
const struct mcux_flexcomm_config *config = dev->config;
|
|
struct mcux_flexcomm_data *data = dev->data;
|
|
I2C_Type *base = config->base;
|
|
uint32_t clock_freq;
|
|
uint32_t baudrate;
|
|
|
|
if (!(I2C_MODE_CONTROLLER & dev_config_raw)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (I2C_ADDR_10_BITS & dev_config_raw) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (I2C_SPEED_GET(dev_config_raw)) {
|
|
case I2C_SPEED_STANDARD:
|
|
baudrate = KHZ(100);
|
|
break;
|
|
case I2C_SPEED_FAST:
|
|
baudrate = KHZ(400);
|
|
break;
|
|
case I2C_SPEED_FAST_PLUS:
|
|
baudrate = MHZ(1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the clock frequency */
|
|
if (clock_control_get_rate(config->clock_dev, config->clock_subsys,
|
|
&clock_freq)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
I2C_MasterSetBaudRate(base, baudrate, clock_freq);
|
|
k_sem_give(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mcux_flexcomm_master_transfer_callback(I2C_Type *base,
|
|
i2c_master_handle_t *handle,
|
|
status_t status,
|
|
void *userData)
|
|
{
|
|
struct mcux_flexcomm_data *data = userData;
|
|
|
|
ARG_UNUSED(handle);
|
|
ARG_UNUSED(base);
|
|
|
|
data->callback_status = status;
|
|
k_sem_give(&data->device_sync_sem);
|
|
}
|
|
|
|
static uint32_t mcux_flexcomm_convert_flags(int msg_flags)
|
|
{
|
|
uint32_t flags = 0U;
|
|
|
|
if (!(msg_flags & I2C_MSG_STOP)) {
|
|
flags |= kI2C_TransferNoStopFlag;
|
|
}
|
|
|
|
if (msg_flags & I2C_MSG_RESTART) {
|
|
flags |= kI2C_TransferRepeatedStartFlag;
|
|
}
|
|
|
|
return flags;
|
|
}
|
|
|
|
static int mcux_flexcomm_transfer(const struct device *dev,
|
|
struct i2c_msg *msgs,
|
|
uint8_t num_msgs, uint16_t addr)
|
|
{
|
|
const struct mcux_flexcomm_config *config = dev->config;
|
|
struct mcux_flexcomm_data *data = dev->data;
|
|
I2C_Type *base = config->base;
|
|
i2c_master_transfer_t transfer;
|
|
status_t status;
|
|
int ret = 0;
|
|
|
|
k_sem_take(&data->lock, K_FOREVER);
|
|
|
|
/* Iterate over all the messages */
|
|
for (int i = 0; i < num_msgs; i++) {
|
|
if (I2C_MSG_ADDR_10_BITS & msgs->flags) {
|
|
ret = -ENOTSUP;
|
|
break;
|
|
}
|
|
|
|
/* Initialize the transfer descriptor */
|
|
transfer.flags = mcux_flexcomm_convert_flags(msgs->flags);
|
|
|
|
/* Prevent the controller to send a start condition between
|
|
* messages, except if explicitly requested.
|
|
*/
|
|
if (i != 0 && !(msgs->flags & I2C_MSG_RESTART)) {
|
|
transfer.flags |= kI2C_TransferNoStartFlag;
|
|
}
|
|
|
|
transfer.slaveAddress = addr;
|
|
transfer.direction = (msgs->flags & I2C_MSG_READ)
|
|
? kI2C_Read : kI2C_Write;
|
|
transfer.subaddress = 0;
|
|
transfer.subaddressSize = 0;
|
|
transfer.data = msgs->buf;
|
|
transfer.dataSize = msgs->len;
|
|
|
|
/* Start the transfer */
|
|
status = I2C_MasterTransferNonBlocking(base,
|
|
&data->handle, &transfer);
|
|
|
|
/* Return an error if the transfer didn't start successfully
|
|
* e.g., if the bus was busy
|
|
*/
|
|
if (status != kStatus_Success) {
|
|
I2C_MasterTransferAbort(base, &data->handle);
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
|
|
/* Wait for the transfer to complete */
|
|
k_sem_take(&data->device_sync_sem, K_FOREVER);
|
|
|
|
/* Return an error if the transfer didn't complete
|
|
* successfully. e.g., nak, timeout, lost arbitration
|
|
*/
|
|
if (data->callback_status != kStatus_Success) {
|
|
I2C_MasterTransferAbort(base, &data->handle);
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
|
|
/* Move to the next message */
|
|
msgs++;
|
|
}
|
|
|
|
k_sem_give(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_I2C_TARGET)
|
|
static void i2c_target_transfer_callback(I2C_Type *base,
|
|
volatile i2c_slave_transfer_t *transfer, void *userData)
|
|
{
|
|
struct mcux_flexcomm_data *data = userData;
|
|
const struct i2c_target_callbacks *target_cb = data->target_cfg->callbacks;
|
|
static uint8_t rxVal, txVal;
|
|
|
|
ARG_UNUSED(base);
|
|
|
|
switch (transfer->event) {
|
|
case kI2C_SlaveTransmitEvent:
|
|
/* request to provide data to transmit */
|
|
if (data->first_read && target_cb->read_requested) {
|
|
data->first_read = false;
|
|
target_cb->read_requested(data->target_cfg, &txVal);
|
|
} else if (target_cb->read_processed) {
|
|
target_cb->read_processed(data->target_cfg, &txVal);
|
|
}
|
|
|
|
transfer->txData = &txVal;
|
|
transfer->txSize = 1;
|
|
break;
|
|
|
|
case kI2C_SlaveReceiveEvent:
|
|
/* request to provide a buffer in which to place received data */
|
|
if (data->first_write && target_cb->write_requested) {
|
|
target_cb->write_requested(data->target_cfg);
|
|
data->first_write = false;
|
|
}
|
|
|
|
transfer->rxData = &rxVal;
|
|
transfer->rxSize = 1;
|
|
data->is_write = true;
|
|
break;
|
|
|
|
case kI2C_SlaveCompletionEvent:
|
|
/* called after every transferred byte */
|
|
if (data->is_write && target_cb->write_received) {
|
|
target_cb->write_received(data->target_cfg, rxVal);
|
|
data->is_write = false;
|
|
}
|
|
break;
|
|
|
|
case kI2C_SlaveDeselectedEvent:
|
|
if (target_cb->stop) {
|
|
target_cb->stop(data->target_cfg);
|
|
}
|
|
|
|
data->first_read = true;
|
|
data->first_write = true;
|
|
break;
|
|
|
|
default:
|
|
LOG_INF("Unhandled event: %d", transfer->event);
|
|
break;
|
|
}
|
|
}
|
|
|
|
int mcux_flexcomm_target_register(const struct device *dev,
|
|
struct i2c_target_config *target_config)
|
|
{
|
|
const struct mcux_flexcomm_config *config = dev->config;
|
|
struct mcux_flexcomm_data *data = dev->data;
|
|
I2C_Type *base = config->base;
|
|
uint32_t clock_freq;
|
|
i2c_slave_config_t i2c_cfg;
|
|
|
|
I2C_MasterDeinit(base);
|
|
|
|
/* Get the clock frequency */
|
|
if (clock_control_get_rate(config->clock_dev, config->clock_subsys,
|
|
&clock_freq)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!target_config) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (data->target_attached) {
|
|
return -EBUSY;
|
|
}
|
|
|
|
data->target_cfg = target_config;
|
|
data->target_attached = true;
|
|
data->first_read = true;
|
|
data->first_write = true;
|
|
|
|
I2C_SlaveGetDefaultConfig(&i2c_cfg);
|
|
i2c_cfg.address0.address = target_config->address;
|
|
|
|
I2C_SlaveInit(base, &i2c_cfg, clock_freq);
|
|
I2C_SlaveTransferCreateHandle(base, &data->target_handle,
|
|
i2c_target_transfer_callback, data);
|
|
I2C_SlaveTransferNonBlocking(base, &data->target_handle,
|
|
kI2C_SlaveCompletionEvent | kI2C_SlaveTransmitEvent |
|
|
kI2C_SlaveReceiveEvent | kI2C_SlaveDeselectedEvent);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mcux_flexcomm_target_unregister(const struct device *dev,
|
|
struct i2c_target_config *target_config)
|
|
{
|
|
const struct mcux_flexcomm_config *config = dev->config;
|
|
struct mcux_flexcomm_data *data = dev->data;
|
|
I2C_Type *base = config->base;
|
|
|
|
if (!data->target_attached) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->target_cfg = NULL;
|
|
data->target_attached = false;
|
|
|
|
I2C_SlaveDeinit(base);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void mcux_flexcomm_isr(const struct device *dev)
|
|
{
|
|
const struct mcux_flexcomm_config *config = dev->config;
|
|
struct mcux_flexcomm_data *data = dev->data;
|
|
I2C_Type *base = config->base;
|
|
|
|
#if defined(CONFIG_I2C_TARGET)
|
|
if (data->target_attached) {
|
|
I2C_SlaveTransferHandleIRQ(base, &data->target_handle);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
I2C_MasterTransferHandleIRQ(base, &data->handle);
|
|
}
|
|
|
|
static int mcux_flexcomm_init(const struct device *dev)
|
|
{
|
|
const struct mcux_flexcomm_config *config = dev->config;
|
|
struct mcux_flexcomm_data *data = dev->data;
|
|
I2C_Type *base = config->base;
|
|
uint32_t clock_freq, bitrate_cfg;
|
|
i2c_master_config_t master_config;
|
|
int error;
|
|
|
|
error = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
|
|
if (error) {
|
|
return error;
|
|
}
|
|
|
|
k_sem_init(&data->lock, 1, 1);
|
|
k_sem_init(&data->device_sync_sem, 0, K_SEM_MAX_LIMIT);
|
|
|
|
if (!device_is_ready(config->clock_dev)) {
|
|
LOG_ERR("clock control device not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Get the clock frequency */
|
|
if (clock_control_get_rate(config->clock_dev, config->clock_subsys,
|
|
&clock_freq)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
I2C_MasterGetDefaultConfig(&master_config);
|
|
I2C_MasterInit(base, &master_config, clock_freq);
|
|
I2C_MasterTransferCreateHandle(base, &data->handle,
|
|
mcux_flexcomm_master_transfer_callback,
|
|
data);
|
|
|
|
bitrate_cfg = i2c_map_dt_bitrate(config->bitrate);
|
|
|
|
error = mcux_flexcomm_configure(dev, I2C_MODE_CONTROLLER | bitrate_cfg);
|
|
if (error) {
|
|
return error;
|
|
}
|
|
|
|
config->irq_config_func(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_driver_api mcux_flexcomm_driver_api = {
|
|
.configure = mcux_flexcomm_configure,
|
|
.transfer = mcux_flexcomm_transfer,
|
|
#if defined(CONFIG_I2C_TARGET)
|
|
.target_register = mcux_flexcomm_target_register,
|
|
.target_unregister = mcux_flexcomm_target_unregister,
|
|
#endif
|
|
};
|
|
|
|
#define I2C_MCUX_FLEXCOMM_DEVICE(id) \
|
|
PINCTRL_DT_INST_DEFINE(id); \
|
|
static void mcux_flexcomm_config_func_##id(const struct device *dev); \
|
|
static const struct mcux_flexcomm_config mcux_flexcomm_config_##id = { \
|
|
.base = (I2C_Type *) DT_INST_REG_ADDR(id), \
|
|
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(id)), \
|
|
.clock_subsys = \
|
|
(clock_control_subsys_t)DT_INST_CLOCKS_CELL(id, name),\
|
|
.irq_config_func = mcux_flexcomm_config_func_##id, \
|
|
.bitrate = DT_INST_PROP(id, clock_frequency), \
|
|
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(id), \
|
|
}; \
|
|
static struct mcux_flexcomm_data mcux_flexcomm_data_##id; \
|
|
I2C_DEVICE_DT_INST_DEFINE(id, \
|
|
mcux_flexcomm_init, \
|
|
NULL, \
|
|
&mcux_flexcomm_data_##id, \
|
|
&mcux_flexcomm_config_##id, \
|
|
POST_KERNEL, \
|
|
CONFIG_I2C_INIT_PRIORITY, \
|
|
&mcux_flexcomm_driver_api); \
|
|
static void mcux_flexcomm_config_func_##id(const struct device *dev) \
|
|
{ \
|
|
IRQ_CONNECT(DT_INST_IRQN(id), \
|
|
DT_INST_IRQ(id, priority), \
|
|
mcux_flexcomm_isr, \
|
|
DEVICE_DT_INST_GET(id), \
|
|
0); \
|
|
irq_enable(DT_INST_IRQN(id)); \
|
|
} \
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(I2C_MCUX_FLEXCOMM_DEVICE)
|