89 lines
2.0 KiB
ReStructuredText
89 lines
2.0 KiB
ReStructuredText
Prepare Linux host
|
|
------------------
|
|
|
|
#. Install DHCP, TFTP servers. For example ``dnsmasq``
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo apt-get install dnsmasq
|
|
|
|
#. Configure DHCP server. Configuration for ``dnsmasq`` is below:
|
|
|
|
.. code-block:: console
|
|
|
|
# Only listen to this interface
|
|
interface=eno2
|
|
dhcp-range=10.1.1.20,10.1.1.30,12h
|
|
|
|
#. Configure TFTP server.
|
|
|
|
.. code-block:: console
|
|
|
|
# tftp
|
|
enable-tftp
|
|
tftp-root=/srv/tftp
|
|
dhcp-boot=zephyr.efi
|
|
|
|
``zephyr.efi`` is a Zephyr EFI binary created above.
|
|
|
|
#. Copy the Zephyr EFI image :file:`zephyr/zephyr.efi` to the
|
|
:file:`/srv/tftp` folder.
|
|
|
|
.. code-block:: console
|
|
|
|
$ cp zephyr/zephyr.efi /srv/tftp
|
|
|
|
|
|
#. TFTP root should be looking like:
|
|
|
|
.. code-block:: console
|
|
|
|
$ tree /srv/tftp
|
|
/srv/tftp
|
|
└── zephyr.efi
|
|
|
|
#. Restart ``dnsmasq`` service:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo systemctl restart dnsmasq.service
|
|
|
|
Prepare the board for network boot
|
|
----------------------------------
|
|
|
|
#. Enable PXE network from BIOS settings.
|
|
|
|
#. Make network boot as the first boot option.
|
|
|
|
Booting the board
|
|
-----------------
|
|
|
|
#. Connect the board to the host system using the serial cable and
|
|
configure your host system to watch for serial data. See board's
|
|
website for more information.
|
|
|
|
.. note::
|
|
Use a baud rate of 115200.
|
|
|
|
#. Power on the the board.
|
|
|
|
#. Verify that the board got an IP address. Run from the Linux host:
|
|
|
|
.. code-block:: console
|
|
|
|
$ journalctl -f -u dnsmasq
|
|
dnsmasq-dhcp[5386]: DHCPDISCOVER(eno2) 00:07:32:52:25:88
|
|
dnsmasq-dhcp[5386]: DHCPOFFER(eno2) 10.1.1.28 00:07:32:52:25:88
|
|
dnsmasq-dhcp[5386]: DHCPREQUEST(eno2) 10.1.1.28 00:07:32:52:25:88
|
|
dnsmasq-dhcp[5386]: DHCPACK(eno2) 10.1.1.28 00:07:32:52:25:88
|
|
|
|
#. Verify that network booting is started:
|
|
|
|
.. code-block:: console
|
|
|
|
$ journalctl -f -u dnsmasq
|
|
dnsmasq-tftp[5386]: sent /srv/tftp/zephyr.efi to 10.1.1.28
|
|
|
|
#. When the boot process completes, you have finished booting the
|
|
Zephyr application image.
|