Maureen Helm 53b08ecbfd drivers: serial: Don't condition uart_irq_rx_ready on irq enabled ... The function uart_irq_rx_ready() should return true if there is data in the receive buffer, regardless of whether the irq is enabled. Fix the mcux and rv32m1 shim drivers to implement this behavior correctly. Prior to this change: - irq_rx_full() checks if RX data is available - irq_rx_ready() checks if RX data is available and interrupts are enabled After this change: - irq_rx_full() checks if RX data is available - irq_rx_ready() renamed to irq_rx_pending() to avoid confusion with the API ready() function - API ready() implementation switched to use irq_rx_full() Signed-off-by: Maureen Helm <maureen.helm@nxp.com>		2021-02-03 08:36:23 -05:00
..
CMakeLists.txt	drivers: serial: ns16550: Remove hard-coded max instance count	2021-01-18 15:45:58 -05:00
Kconfig	…
Kconfig.altera_jtag	…
Kconfig.apbuart	…
Kconfig.cc13xx_cc26xx	…
Kconfig.cc32xx	…
Kconfig.cmsdk_apb	…
Kconfig.esp32	…
Kconfig.gecko	…
Kconfig.imx	…
Kconfig.leuart_gecko	…
Kconfig.litex	…
Kconfig.lpc11u6x	…
Kconfig.mcux	…
Kconfig.mcux_flexcomm	…
Kconfig.mcux_iuart	…
Kconfig.mcux_lpsci	…
Kconfig.mcux_lpuart	…
Kconfig.miv	…
Kconfig.msp432p4xx	…
Kconfig.native_posix	…
Kconfig.npcx	…
Kconfig.nrfx	…
Kconfig.ns16550	drivers: serial: ns16550: Remove hard-coded max instance count	2021-01-18 15:45:58 -05:00
Kconfig.nuvoton	…
Kconfig.pl011	drivers: pl011: add SBSA mode	2021-01-24 13:59:55 -05:00
Kconfig.psoc6	…
Kconfig.rtt	…
Kconfig.rv32m1_lpuart	…
Kconfig.sam0	…
Kconfig.sifive	drivers: serial: sifive: use interrupt-cell to set IRQ priority	2021-01-16 17:22:08 -05:00
Kconfig.stellaris	…
Kconfig.stm32	drivers: serial: implement stm32 uart async api	2021-01-18 19:07:29 +01:00
Kconfig.uart_sam	…
Kconfig.usart_sam	…
Kconfig.xlnx	…
Kconfig.xmc4xxx	…
leuart_gecko.c	…
uart_altera_jtag_hal.c	…
uart_apbuart.c	drivers/apbuart: add TX FIFO interrupt support	2021-01-21 15:53:03 -05:00
uart_cc13xx_cc26xx.c	power: Remove power management conditionals from code	2021-01-22 09:31:20 -05:00
uart_cc32xx.c	device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE	2021-01-15 07:16:21 -06:00
uart_cmsdk_apb.c	…
uart_esp32.c	soc/esp32: Move logging library to IRAM with CONFIG_LOG_MINIMAL	2021-01-23 08:43:10 -05:00
uart_gecko.c	…
uart_handlers.c	…
uart_imx.c	…
uart_liteuart.c	…
uart_lpc11u6x.c	…
uart_lpc11u6x.h	…
uart_mcux.c	drivers: serial: Don't condition uart_irq_rx_ready on irq enabled	2021-02-03 08:36:23 -05:00
uart_mcux_flexcomm.c	drivers: serial: Don't condition uart_irq_rx_ready on irq enabled	2021-02-03 08:36:23 -05:00
uart_mcux_iuart.c	drivers: serial: Don't condition uart_irq_rx_ready on irq enabled	2021-02-03 08:36:23 -05:00
uart_mcux_lpsci.c	drivers: serial: Don't condition uart_irq_rx_ready on irq enabled	2021-02-03 08:36:23 -05:00
uart_mcux_lpuart.c	drivers: serial: Don't condition uart_irq_rx_ready on irq enabled	2021-02-03 08:36:23 -05:00
uart_miv.c	…
uart_msp432p4xx.c	device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE	2021-01-15 07:16:21 -06:00
uart_native_posix.c	…
uart_npcx.c	power: Remove power management conditionals from code	2021-01-22 09:31:20 -05:00
uart_nrfx_uart.c	device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE	2021-01-15 07:16:21 -06:00
uart_nrfx_uarte.c	device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE	2021-01-15 07:16:21 -06:00
uart_ns16550.c	drivers: serial: ns16550: Remove hard-coded max instance count	2021-01-18 15:45:58 -05:00
uart_ns16550.h	…
uart_ns16550_port_x.h	drivers: serial: ns16550: Remove hard-coded max instance count	2021-01-18 15:45:58 -05:00
uart_nuvoton.c	…
uart_pl011.c	drivers: pl011: add SBSA mode	2021-01-24 13:59:55 -05:00
uart_psoc6.c	…
uart_rtt.c	…
uart_rv32m1_lpuart.c	drivers: serial: Don't condition uart_irq_rx_ready on irq enabled	2021-02-03 08:36:23 -05:00
uart_sam.c	…
uart_sam0.c	…
uart_sifive.c	drivers: serial: sifive: use interrupt-cell to set IRQ priority	2021-01-16 17:22:08 -05:00
uart_stellaris.c	…
uart_stm32.c	drivers: serial: implement stm32 uart async api	2021-01-18 19:07:29 +01:00
uart_stm32.h	drivers: serial: implement stm32 uart async api	2021-01-18 19:07:29 +01:00
uart_xlnx_ps.c	device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE	2021-01-15 07:16:21 -06:00
uart_xlnx_uartlite.c	…
uart_xmc4xxx.c	…
usart_sam.c	…