zephyr

History

Reto Schneider 7eabab2f5d samples, tests: Use semi-accurate project names When using an IDE (e.g. Eclipse, Qt Creator), the project name gets displayed. This greatly simplifies the navigation between projects when having many of them open at the same time. Naming every project "NONE" defeats this functionality. This patch tries to use sensible project names while not duplicating too much of what is already represented in the path. This is done by using the name of the directory the relevant CMakeLists.txt file is stored in. To ensure unique project names in the samples (and again, in the tests folder) folder, small manual adjustments have been done. Signed-off-by: Reto Schneider <code@reto-schneider.ch>		2018-10-27 21:31:25 -04:00
..
src	net: Use log_strdup() when printing debug strings	2018-10-04 14:13:57 +03:00
CMakeLists.txt	samples, tests: Use semi-accurate project names	2018-10-27 21:31:25 -04:00
README.rst	samples: net: Update compilation instructions for cmake	2017-11-10 11:36:33 -05:00
prj.conf	samples: net: coap_server: Convert to new logging system	2018-10-04 14:13:57 +03:00
prj_bt.conf	samples: net: coap_server: Convert to new logging system	2018-10-04 14:13:57 +03:00
prj_cc2520.conf	net: config: Rename Kconfig options to correspond to library name	2018-08-13 18:42:31 -07:00
sample.yaml	samples: bluetooth and net samples need test setup	2017-12-28 20:24:29 -05:00

README.rst

.. _coap-server-sample:

CoAP Server
###########

Overview
********

A simple CoAP server showing how to expose a simple resource.

This demo assumes that the platform of choice has networking support,
some adjustments to the configuration may be needed.

The sample will listen for requests in the CoAP UDP port (5683) in the
site-local IPv6 multicast address reserved for CoAP nodes.

The sample exports the following resources:

.. code-block:: none

   /test
   /seg1/seg2/seg3
   /query
   /separate
   /large
   /location-query
   /large-update

These resources allow a good part of the ETSI test cases to be run
against coap-server.

Building And Running
********************

This project has no output in case of success, the correct
functionality can be verified by using some external tool like tcpdump
or wireshark.

See the `net-tools`_ project for more details

It can be built and executed on QEMU as described in :ref:`networking_with_qemu`.

Use this command on the host to run the`libcoap`_ implementation of
the ETSI test cases:

.. code-block:: console

   sudo ./examples/etsi_coaptest.sh -i tap0 2001:db8::1

To build the version supporting the TI CC2520 radio, use the supplied
prj_cc2520.conf configuration file enabling IEEE 802.15.4.

.. _`net-tools`: https://github.com/zephyrproject-rtos/net-tools

.. _`libcoap`: https://github.com/obgm/libcoap