66a259a22a
The config file sourced in openocd.cfg is the nuclean_f3 one instead of the one for the stm32373c. This makes it impossible to flash the stm32373c evaluation board rev.B: Error: open failed in procedure 'init' in procedure 'ocd_bouncer' error: command exited with status 1: /opt/zephyr-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/openocd -s /opt/zephyr-sdk/sysroots/x86_64-pokysdk-linux/usr/share/openocd/scripts -f /home/maudat/repo_upstream/zephyr/boards/arm/stm32373c_eval/support/openocd.cfg -c init -c targets -c 'reset halt' -c 'flash write_image erase /home/maudat/repo_upstream/zephyr/samples/basic/blinky/build/zephyr/zephyr.bin 0x8000000' -c 'reset halt' -c 'verify_image /home/maudat/repo_upstream/zephyr/samples/basic/blinky/build/zephyr/zephyr.bin 0x8000000' -c 'reset run' -c shutdown Replace the file sourced by stm32f3discovery.cfg to flash successfully. Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> |
||
|---|---|---|
| .. | ||
| openocd.cfg | ||