zephyr/include/net/ieee802154_radio.h

281 lines
7.7 KiB
C

/*
* Copyright (c) 2016 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief Public IEEE 802.15.4 Radio API
*/
#ifndef ZEPHYR_INCLUDE_NET_IEEE802154_RADIO_H_
#define ZEPHYR_INCLUDE_NET_IEEE802154_RADIO_H_
#include <device.h>
#include <net/net_if.h>
#include <net/net_pkt.h>
#include <net/ieee802154.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @addtogroup ieee802154
* @{
*/
enum ieee802154_hw_caps {
IEEE802154_HW_FCS = BIT(0), /* Frame Check-Sum supported */
IEEE802154_HW_PROMISC = BIT(1), /* Promiscuous mode supported */
IEEE802154_HW_FILTER = BIT(2), /* Filter PAN ID, long/short addr */
IEEE802154_HW_CSMA = BIT(3), /* CSMA-CA supported */
IEEE802154_HW_2_4_GHZ = BIT(4), /* 2.4Ghz radio supported */
IEEE802154_HW_TX_RX_ACK = BIT(5), /* Handles ACK request on TX */
IEEE802154_HW_SUB_GHZ = BIT(6), /* Sub-GHz radio supported */
IEEE802154_HW_ENERGY_SCAN = BIT(7), /* Energy scan supported */
IEEE802154_HW_TXTIME = BIT(8), /* TX at specified time supported */
};
enum ieee802154_filter_type {
IEEE802154_FILTER_TYPE_IEEE_ADDR,
IEEE802154_FILTER_TYPE_SHORT_ADDR,
IEEE802154_FILTER_TYPE_PAN_ID,
IEEE802154_FILTER_TYPE_SRC_IEEE_ADDR,
IEEE802154_FILTER_TYPE_SRC_SHORT_ADDR,
};
enum ieee802154_event {
IEEE802154_EVENT_TX_STARTED /* Data transmission started */
};
typedef void (*energy_scan_done_cb_t)(struct device *dev, int16_t max_ed);
typedef void (*ieee802154_event_cb_t)(struct device *dev,
enum ieee802154_event evt,
void *event_params);
struct ieee802154_filter {
/** @cond ignore */
union {
uint8_t *ieee_addr;
uint16_t short_addr;
uint16_t pan_id;
};
/* @endcond */
};
/** IEEE802.15.4 Transmission mode. */
enum ieee802154_tx_mode {
/** Transmit packet immediately, no CCA. */
IEEE802154_TX_MODE_DIRECT,
/** Perform CCA before packet transmission. */
IEEE802154_TX_MODE_CCA,
/** Perform full CSMA CA procedure before packet transmission. */
IEEE802154_TX_MODE_CSMA_CA,
/** Transmit packet in the future, at specified time, no CCA. */
IEEE802154_TX_MODE_TXTIME,
/** Transmit packet in the future, perform CCA before transmission. */
IEEE802154_TX_MODE_TXTIME_CCA,
};
/** IEEE802.15.4 Frame Pending Bit table address matching mode. */
enum ieee802154_fpb_mode {
/** The pending bit shall be set only for addresses found in the list.
*/
IEEE802154_FPB_ADDR_MATCH_THREAD,
/** The pending bit shall be cleared for short addresses found in
* the list.
*/
IEEE802154_FPB_ADDR_MATCH_ZIGBEE,
};
/** IEEE802.15.4 driver configuration types. */
enum ieee802154_config_type {
/** Indicates how radio driver should set Frame Pending bit in ACK
* responses for Data Requests. If enabled, radio driver should
* determine whether to set the bit or not based on the information
* provided with ``IEEE802154_CONFIG_ACK_FPB`` config and FPB address
* matching mode specified. Otherwise, Frame Pending bit should be set
* to ``1``(see IEEE Std 802.15.4-2006, 7.2.2.3.1).
*/
IEEE802154_CONFIG_AUTO_ACK_FPB,
/** Indicates whether to set ACK Frame Pending bit for specific address
* or not. Disabling the Frame Pending bit with no address provided
* (NULL pointer) should disable it for all enabled addresses.
*/
IEEE802154_CONFIG_ACK_FPB,
/** Indicates whether the device is a PAN coordinator. */
IEEE802154_CONFIG_PAN_COORDINATOR,
/** Enable/disable promiscuous mode. */
IEEE802154_CONFIG_PROMISCUOUS,
/** Specifies new radio event handler. Specifying NULL as a handler
* will disable radio events notification.
*/
IEEE802154_CONFIG_EVENT_HANDLER
};
/** IEEE802.15.4 driver configuration data. */
struct ieee802154_config {
/** Configuration data. */
union {
/** ``IEEE802154_CONFIG_AUTO_ACK_FPB`` */
struct {
bool enabled;
enum ieee802154_fpb_mode mode;
} auto_ack_fpb;
/** ``IEEE802154_CONFIG_ACK_FPB`` */
struct {
uint8_t *addr;
bool extended;
bool enabled;
} ack_fpb;
/** ``IEEE802154_CONFIG_PAN_COORDINATOR`` */
bool pan_coordinator;
/** ``IEEE802154_CONFIG_PROMISCUOUS`` */
bool promiscuous;
/** ``IEEE802154_CONFIG_EVENT_HANDLER`` */
ieee802154_event_cb_t event_handler;
};
};
/**
* @brief IEEE 802.15.4 radio interface API.
*
*/
struct ieee802154_radio_api {
/**
* Mandatory to get in first position.
* A network device should indeed provide a pointer on such
* net_if_api structure. So we make current structure pointer
* that can be casted to a net_if_api structure pointer.
*/
struct net_if_api iface_api;
/** Get the device capabilities */
enum ieee802154_hw_caps (*get_capabilities)(struct device *dev);
/** Clear Channel Assesment - Check channel's activity */
int (*cca)(struct device *dev);
/** Set current channel */
int (*set_channel)(struct device *dev, uint16_t channel);
/** Set/Unset filters (for IEEE802154_HW_FILTER ) */
int (*filter)(struct device *dev,
bool set,
enum ieee802154_filter_type type,
const struct ieee802154_filter *filter);
/** Set TX power level in dbm */
int (*set_txpower)(struct device *dev, int16_t dbm);
/** Transmit a packet fragment */
int (*tx)(struct device *dev, enum ieee802154_tx_mode mode,
struct net_pkt *pkt, struct net_buf *frag);
/** Start the device */
int (*start)(struct device *dev);
/** Stop the device */
int (*stop)(struct device *dev);
/** Set specific radio driver configuration. */
int (*configure)(struct device *dev,
enum ieee802154_config_type type,
const struct ieee802154_config *config);
#ifdef CONFIG_NET_L2_IEEE802154_SUB_GHZ
/** Get the available amount of Sub-GHz channels */
uint16_t (*get_subg_channel_count)(struct device *dev);
#endif /* CONFIG_NET_L2_IEEE802154_SUB_GHZ */
/** Run an energy detection scan.
* Note: channel must be set prior to request this function.
* duration parameter is in ms.
*/
int (*ed_scan)(struct device *dev,
uint16_t duration,
energy_scan_done_cb_t done_cb);
};
/* Make sure that the network interface API is properly setup inside
* IEEE 802154 radio API struct (it is the first one).
*/
BUILD_ASSERT(offsetof(struct ieee802154_radio_api, iface_api) == 0);
#define IEEE802154_AR_FLAG_SET (0x20)
/**
* @brief Check if AR flag is set on the frame inside given net_pkt
*
* @param frag A valid pointer on a net_buf structure, must not be NULL,
* and its length should be at least made of 1 byte (ACK frames
* are the smallest frames on 15.4 and made of 3 bytes, not
* not counting the FCS part).
*
* @return True if AR flag is set, False otherwise
*/
static inline bool ieee802154_is_ar_flag_set(struct net_buf *frag)
{
return (*frag->data & IEEE802154_AR_FLAG_SET);
}
/**
* @brief Radio driver ACK handling function that hw drivers should use
*
* @details ACK handling requires fast handling and thus such function
* helps to hook directly the hw drivers to the radio driver.
*
* @param iface A valid pointer on a network interface that received the packet
* @param pkt A valid pointer on a packet to check
*
* @return NET_OK if it was handled, NET_CONTINUE otherwise
*/
#ifndef CONFIG_IEEE802154_RAW_MODE
extern enum net_verdict ieee802154_radio_handle_ack(struct net_if *iface,
struct net_pkt *pkt);
#else /* CONFIG_IEEE802154_RAW_MODE */
static inline enum net_verdict ieee802154_radio_handle_ack(struct net_if *iface,
struct net_pkt *pkt)
{
return NET_CONTINUE;
}
#endif /* CONFIG_IEEE802154_RAW_MODE */
/**
* @brief Initialize L2 stack for a given interface
*
* @param iface A valid pointer on a network interface
*/
#ifndef CONFIG_IEEE802154_RAW_MODE
void ieee802154_init(struct net_if *iface);
#else
#define ieee802154_init(_iface_)
#endif /* CONFIG_IEEE802154_RAW_MODE */
#ifdef __cplusplus
}
#endif
/**
* @}
*/
#endif /* ZEPHYR_INCLUDE_NET_IEEE802154_RADIO_H_ */