zephyr

History

Marcus Shawcroft 954baea90b random: Restructure RANDOM Kconfig Restructure the RANDOM Kconfig to match the structure used in other drivers with a single top level menu. Move the true random number generators to appear first in the menu, with pseudo generators at the bottom. Do not present pseudo generators if a true random generator is presented. This change implies that tests, samples and applications that require the random driver interface must now select CONFIG_RANDOM_GENERATOR. In order for tests and samples to build (and run) on platforms that have no random driver it remains necessary to select the CONFIG_TEST_RANDOM_GENERATOR. Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of enabling a random driver that delivers non random numbers for the purpose of testing only. Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>		2016-12-13 22:50:18 +00:00
..
src	…
Makefile	…
README	iot/mqtt: Add support for frdm_k64f	2016-12-02 12:41:06 +02:00
prj.conf	random: Restructure RANDOM Kconfig	2016-12-13 22:50:18 +00:00
testcase.ini	iot/mqtt: Add support for frdm_k64f	2016-12-02 12:41:06 +02:00

README

MQTT Library Test
-----------------

This MQTT application tests the low-level API for packet handling.
No network activity is involved in this test, so ** theoretically **
it can be run on almost any board already supported by Zephyr and
with enough RAM/ROM.

Build and Run
-------------

* QEMU x86

  Build & run:
  make && make qemu

* Arduino 101

  Build:
  make BOARD=arduino_101

  Flashing:
  sudo dfu-util -a x86_app -D outdir/arduino_101/zephyr.bin

  For more information about this board, see:
  https://wiki.zephyrproject.org/view/Arduino_101

* NXP Freedom-K64F (frdm-k64f)

  Build:
  make pristine && make BOARD=frdm_k64f

  Firmware version:
  Version: 0226
  Build:   Aug 24 2015 17:06:30
  Git Commit SHA: 27a236b9fe39c674a703c5c89655fbd26b8e27e1
  Git Local mods: Yes

  For more information about this board, see:
  https://developer.mbed.org/platforms/frdm-k64f/

Sample Output
-------------

To exit from QEMU enter: 'CTRL+a, x'
[QEMU] CPU: qemu32
tc_start() - MQTT Library test
[PASS] 1 - CONNECT, new session, zeros
[PASS] 2 - CONNECT, new session, zeros and keep alive = 365
[PASS] 3 - CONNECT, new session, will
[PASS] 4 - CONNECT, new session, will retain
[PASS] 5 - CONNECT, new session, will qos = 1
[PASS] 6 - CONNECT, new session, will qos = 1, will retain
[PASS] 7 - CONNECT, new session, username and password
[PASS] 8 - DISCONNECT
[PASS] 9 - PUBLISH, qos = 0
[PASS] 10 - PUBLISH, retain = 1
[PASS] 11 - PUBLISH, retain = 1, qos = 1
[PASS] 12 - PUBLISH, qos = 2
[PASS] 13 - SUBSCRIBE, one topic, qos = 0
[PASS] 14 - SUBSCRIBE, one topic, qos = 1
[PASS] 15 - SUBSCRIBE, one topic, qos = 2
[PASS] 16 - SUBACK, one topic, qos = 0
[PASS] 17 - SUBACK, one topic, qos = 1
[PASS] 18 - SUBACK, one topic, qos = 2
[PASS] 19 - PINGREQ
[PASS] 20 - PINGRESP
[PASS] 21 - PUBACK
[PASS] 22 - PUBREC
[PASS] 23 - PUBREL
[PASS] 24 - PUBCOMP
[PASS] 25 - UNSUBACK
===================================================================
PASS - main.
===================================================================
PROJECT EXECUTION SUCCESSFUL