143 lines
4.0 KiB
Plaintext
143 lines
4.0 KiB
Plaintext
# Kconfig.cc2520 - TI CC2520 configuration options
|
|
#
|
|
#
|
|
# Copyright (c) 2017 Intel Corporation
|
|
#
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
#
|
|
|
|
menuconfig IEEE802154_CC2520
|
|
bool "TI CC2520 Driver support"
|
|
depends on NETWORKING
|
|
|
|
if IEEE802154_CC2520
|
|
|
|
config IEEE802154_CC2520_DRV_NAME
|
|
string "TI CC2520 Driver's name"
|
|
default "cc2520"
|
|
help
|
|
This option sets the driver name
|
|
|
|
config IEEE802154_CC2520_SPI_DRV_NAME
|
|
string "SPI driver's name to use to access CC2520"
|
|
help
|
|
This option is mandatory to set which SPI controller to use in order
|
|
to actually control the CC2520 chip.
|
|
|
|
config IEEE802154_CC2520_SPI_FREQ
|
|
int "SPI system frequency"
|
|
default 0
|
|
help
|
|
This option sets the SPI controller's frequency. Beware this value
|
|
depends on the SPI controller being used and also on the system
|
|
clock.
|
|
|
|
config IEEE802154_CC2520_SPI_SLAVE
|
|
int "SPI slave linked to CC2520"
|
|
default 0
|
|
help
|
|
This option sets the SPI slave number SPI controller has to switch
|
|
to when dealing with CC2520 chip.
|
|
|
|
config IEEE802154_CC2520_GPIO_SPI_CS
|
|
bool "Manage SPI CS through a GPIO pin"
|
|
help
|
|
This option is useful if one needs to manage SPI CS through a GPIO
|
|
pin to by-pass the SPI controller's CS logic.
|
|
|
|
config IEEE802154_CC2520_GPIO_SPI_CS_DRV_NAME
|
|
string "GPIO driver's name to use to drive SPI CS through"
|
|
depends on IEEE802154_CC2520_GPIO_SPI_CS
|
|
help
|
|
This option is mandatory to set which GPIO controller to use in order
|
|
to actually emulate the SPI CS.
|
|
|
|
config IEEE802154_CC2520_GPIO_SPI_CS_PIN
|
|
int "GPIO PIN to use to drive SPI CS through"
|
|
default 0
|
|
depends on IEEE802154_CC2520_GPIO_SPI_CS
|
|
help
|
|
This option is mandatory to set which GPIO pin to use in order
|
|
to actually emulate the SPI CS.
|
|
|
|
config IEEE802154_CC2520_RX_STACK_SIZE
|
|
int "Driver's internal RX thread stack size"
|
|
default 800
|
|
help
|
|
This option sets the driver's stack size for its internal RX thread.
|
|
The default value should be sufficient, but in case it proves to be
|
|
a too little one, this option makes it easy to play with the size.
|
|
|
|
config IEEE802154_CC2520_INIT_PRIO
|
|
int "CC2520 initialization priority"
|
|
default 80
|
|
help
|
|
Set the initialization priority number. Do not mess with it unless
|
|
you know what you are doing. Beware cc2520 requires gpio and spi to
|
|
be ready first (and sometime gpio should be the very first as spi
|
|
might need it too). And of course it has to start before the net stack.
|
|
|
|
config IEEE802154_CC2520_RANDOM_MAC
|
|
bool "Random MAC address"
|
|
default y
|
|
help
|
|
Generate a random MAC address dynamically.
|
|
|
|
if ! IEEE802154_CC2520_RANDOM_MAC
|
|
|
|
config IEEE802154_CC2520_MAC4
|
|
hex "MAC Address Byte 4"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 4 of the MAC address.
|
|
|
|
config IEEE802154_CC2520_MAC5
|
|
hex "MAC Address Byte 5"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 5 of the MAC address.
|
|
|
|
config IEEE802154_CC2520_MAC6
|
|
hex "MAC Address Byte 6"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 6 of the MAC address.
|
|
|
|
config IEEE802154_CC2520_MAC7
|
|
hex "MAC Address Byte 7"
|
|
default 0
|
|
range 0 0xff
|
|
help
|
|
This is the byte 7 of the MAC address.
|
|
|
|
endif # IEEE802154_CC2520_RANDOM_MAC
|
|
|
|
config IEEE802154_CC2520_CRYPTO
|
|
bool "Enable hardware crypto helper on cc2520"
|
|
depends on NET_L2_IEEE802154_SECURITY
|
|
help
|
|
This option will expose the hardware AES encryption from CC2520.
|
|
Such feature should not be used for anything but 802.15.4 security.
|
|
The crypto device exposed will only support synchronous CCM operation.
|
|
|
|
config IEEE802154_CC2520_CRYPTO_DRV_NAME
|
|
string "TI CC2520 Crypto Driver's name"
|
|
default "cc2520_crypto"
|
|
depends on IEEE802154_CC2520_CRYPTO
|
|
help
|
|
This option sets the driver name for the crypto part found on CC2520.
|
|
|
|
config IEEE802154_CC2520_CRYPTO_INIT_PRIO
|
|
int "TI CC2520 crypto device initialization priority"
|
|
default 81
|
|
depends on IEEE802154_CC2520_CRYPTO
|
|
help
|
|
Set the initialization priority number. Do not mess with it unless
|
|
you know what you are doing. It should be initialized after CC2520
|
|
as it shares the same runtime context.
|
|
|
|
endif # IEEE802154_CC2520
|