88 lines
5.0 KiB
Plaintext
88 lines
5.0 KiB
Plaintext
Title: latency measure
|
|
|
|
Description:
|
|
|
|
This benchmark measures the latency of selected capabilities of both the
|
|
nanokernel and microkernel.
|
|
|
|
IMPORTANT: The sample output below was generated using a simulation
|
|
environment, and may not reflect the results that will be generated using other
|
|
environments (simulated or otherwise).
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
Building and Running Project:
|
|
|
|
This microkernel project outputs to the console. It can be built and executed
|
|
on QEMU as follows:
|
|
|
|
make NODE1.qemu
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
Troubleshooting:
|
|
|
|
Problems caused by out-dated project information can be addressed by
|
|
issuing one of the following commands then rebuilding the project:
|
|
|
|
make clean # discard results of previous builds
|
|
# but keep existing configuration info
|
|
or
|
|
make pristine # discard results of previous builds
|
|
# and restore pre-defined configuration info
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
Sample Output:
|
|
|
|
|-----------------------------------------------------------------------------|
|
|
| Nanokernel Latency Benchmark |
|
|
|-----------------------------------------------------------------------------|
|
|
| tcs = timer clock cycles: 1 tcs is N nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 1- Measure time to switch from fiber to ISR execution |
|
|
| switching time is NNNN tcs = NNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 2- Measure time to switch from ISR back to interrupted fiber |
|
|
| switching time is NNNN tcs = NNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 3- Measure time from ISR to executing a different fiber (rescheduled) |
|
|
| switching time is NNNN tcs = NNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 4- Measure average context switch time between fibers |
|
|
| Average context switch time is NNNN tcs = NNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 5- Measure average time to lock then unlock interrupts |
|
|
| 5.1- When each lock and unlock is executed as a function call |
|
|
| Average time for lock then unlock is NNNN tcs = NNNN nsec |
|
|
| |
|
|
| 5.2- When each lock and unlock is executed as inline function call |
|
|
| Average time for lock then unlock is NNN tcs = NNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
|-----------------------------------------------------------------------------|
|
|
| Microkernel Latency Benchmark |
|
|
|-----------------------------------------------------------------------------|
|
|
| tcs = timer clock cycles: 1 tcs is N nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 1- Measure time to switch from ISR to back to interrupted task |
|
|
| switching time is NNNN tcs = NNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 2- Measure time from ISR to executing a different task (rescheduled) |
|
|
| switch time is NNNNN tcs = NNNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 3- Measure average time to signal a sema then test that sema |
|
|
| Average semaphore signal time NNNNN tcs = NNNNNN nsec |
|
|
| Average semaphore test time NNNNN tcs = NNNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 4- Measure average time to lock a mutex then unlock that mutex |
|
|
| Average time to lock the mutex NNNNN tcs = NNNNNN nsec |
|
|
| Average time to unlock the mutex NNNNN tcs = NNNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| 5- Measure average context switch time between tasks using (task_yield) |
|
|
| Average task context switch using yield NNNNN tcs = NNNNNN nsec |
|
|
|-----------------------------------------------------------------------------|
|
|
| E N D |
|
|
|-----------------------------------------------------------------------------|
|
|
===================================================================
|
|
PROJECT EXECUTION SUCCESSFUL
|