144 lines
3.7 KiB
ReStructuredText
144 lines
3.7 KiB
ReStructuredText
.. _gd32f450v_start:
|
|
|
|
GigaDevice GD32F450V-START
|
|
##########################
|
|
|
|
Overview
|
|
********
|
|
|
|
The GD32F450V-START board is a hardware platform that enables prototyping
|
|
on GD32F450VK Cortex-M4F Stretch Performance MCU.
|
|
|
|
The GD32F450VK features a single-core ARM Cortex-M4F MCU which can run up
|
|
to 200 MHz with flash accesses zero wait states, 3072kiB of Flash, 256kiB of
|
|
SRAM and 82 GPIOs.
|
|
|
|
.. image:: img/gd32f450v_start.webp
|
|
:align: center
|
|
:alt: gd32f450v_start
|
|
|
|
Hardware
|
|
********
|
|
|
|
- GD32F450VKT6 MCU
|
|
- 1 x User LEDs
|
|
- 1 x User Push buttons
|
|
- USB FS/HS connectors
|
|
- GD-Link on board programmer
|
|
- J-Link/SWD connector
|
|
|
|
For more information about the GD32F450 SoC and GD32F450V-START board:
|
|
|
|
- `GigaDevice Cortex-M4F Stretch Performance SoC Website`_
|
|
- `GD32F450X Datasheet`_
|
|
- `GD32F4XX User Manual`_
|
|
- `GD32F450V-START User Manual`_
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The board configuration supports the following hardware features:
|
|
|
|
.. list-table::
|
|
:header-rows: 1
|
|
|
|
* - Peripheral
|
|
- Kconfig option
|
|
- Devicetree compatible
|
|
* - EXTI
|
|
- :kconfig:option:`CONFIG_GD32_EXTI`
|
|
- :dtcompatible:`gd,gd32-exti`
|
|
* - GPIO
|
|
- :kconfig:option:`CONFIG_GPIO`
|
|
- :dtcompatible:`gd,gd32-gpio`
|
|
* - NVIC
|
|
- N/A
|
|
- :dtcompatible:`arm,v8m-nvic`
|
|
* - PWM
|
|
- :kconfig:option:`CONFIG_PWM`
|
|
- :dtcompatible:`gd,gd32-pwm`
|
|
* - SYSTICK
|
|
- N/A
|
|
- N/A
|
|
* - USART
|
|
- :kconfig:option:`CONFIG_SERIAL`
|
|
- :dtcompatible:`gd,gd32-usart`
|
|
|
|
Other peripherals may be used if shields are connected to the board.
|
|
|
|
Serial Port
|
|
===========
|
|
|
|
The GD32F450V-START board has no exposed serial communication port. The board
|
|
provides default configuration for USART0 with TX connected at PB6 and RX at
|
|
PB7. PB6/PB7 are exposed in JP6, so you can solder a connector and use a
|
|
UART-USB adapter.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Before programming your board make sure to configure boot jumpers as
|
|
follows:
|
|
|
|
- JP2/3: Select 2-3 for both (boot from user memory)
|
|
|
|
Using GD-Link
|
|
=============
|
|
|
|
The GD32F450V-START includes an onboard programmer/debugger (GD-Link) which
|
|
allows flash programming and debugging over USB. There is also a SWD header
|
|
(JP100) which can be used with tools like Segger J-Link.
|
|
|
|
#. Build the Zephyr kernel and the :ref:`hello_world` sample application:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: gd32f450v_start
|
|
:goals: build
|
|
:compact:
|
|
|
|
#. Run your favorite terminal program to listen for output. On Linux the
|
|
terminal should be something like ``/dev/ttyUSB0``. For example:
|
|
|
|
.. code-block:: console
|
|
|
|
minicom -D /dev/ttyUSB0 -o
|
|
|
|
The -o option tells minicom not to send the modem initialization
|
|
string. Connection should be configured as follows:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
#. To flash an image:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: gd32f450v_start
|
|
:goals: flash
|
|
:compact:
|
|
|
|
You should see "Hello World! gd32f450v_start" in your terminal.
|
|
|
|
#. To debug an image:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: gd32f450v_start
|
|
:goals: debug
|
|
:compact:
|
|
|
|
.. _GigaDevice Cortex-M4F Stretch Performance SoC Website:
|
|
https://www.gigadevice.com/products/microcontrollers/gd32/arm-cortex-m4/stretch-performance-line/
|
|
|
|
.. _GD32F450X Datasheet:
|
|
https://gd32mcu.com/data/documents/datasheet/GD32F450xx_Datasheet_Rev2.3.pdf
|
|
|
|
.. _GD32F4xx User Manual:
|
|
https://www.gigadevice.com/manual/gd32f450xxxx-user-manual/
|
|
|
|
.. _GD32F450V-START User Manual:
|
|
https://gd32mcu.com/data/documents/evaluationBoard/GD32F4xx_Demo_Suites_V2.6.1.rar
|