172 lines
5.6 KiB
ReStructuredText
172 lines
5.6 KiB
ReStructuredText
.. _arduino_nano_33_iot:
|
|
|
|
Arduino Nano 33 IOT
|
|
###################
|
|
|
|
Overview
|
|
********
|
|
|
|
The Arduino Nano 33 IOT is a small form factor development board with USB,
|
|
Wifi, Bluetooth, a 6 axis IMU, and secure element.
|
|
|
|
.. image:: img/nano_33_iot.jpg
|
|
:align: center
|
|
:alt: Arduino Nano 33 IOT
|
|
|
|
Hardware
|
|
********
|
|
|
|
- ATSAMD21G18A ARM Cortex-M0+ processor at 48 MHz
|
|
- 256 KiB flash memory and 32 KiB of RAM
|
|
- One user LED
|
|
- One reset button
|
|
- Native USB port
|
|
- Wifi and Bluetooth via a u-blox NINA-W102
|
|
- ATECC608A secure element
|
|
- LSM6DS3 six axis accelerometer and gyro
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The arduino_nano_33_iot board configuration supports the following hardware
|
|
features:
|
|
|
|
+-----------+------------+------------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+==========================================+
|
|
| ADC | on-chip | Analog to digital converter |
|
|
+-----------+------------+------------------------------------------+
|
|
| COUNTER | on-chip | Pulse counter |
|
|
+-----------+------------+------------------------------------------+
|
|
| DMA | on-chip | Direct memory access unit |
|
|
+-----------+------------+------------------------------------------+
|
|
| Flash | on-chip | Can be used with LittleFS to store files |
|
|
+-----------+------------+------------------------------------------+
|
|
| GPIO | on-chip | I/O ports |
|
|
+-----------+------------+------------------------------------------+
|
|
| HWINFO | on-chip | Hardware info and serial number |
|
|
+-----------+------------+------------------------------------------+
|
|
| NVIC | on-chip | nested vector interrupt controller |
|
|
+-----------+------------+------------------------------------------+
|
|
| PWM | on-chip | Pulse Width Modulation |
|
|
+-----------+------------+------------------------------------------+
|
|
| SPI | on-chip | Serial Peripheral Interface ports |
|
|
+-----------+------------+------------------------------------------+
|
|
| SYSTICK | on-chip | systick |
|
|
+-----------+------------+------------------------------------------+
|
|
| USART | on-chip | Serial ports |
|
|
+-----------+------------+------------------------------------------+
|
|
| USB | on-chip | USB device |
|
|
+-----------+------------+------------------------------------------+
|
|
| WDT | on-chip | Watchdog |
|
|
+-----------+------------+------------------------------------------+
|
|
|
|
Other hardware features are not currently supported by Zephyr.
|
|
|
|
The default configuration can be found in the Kconfig
|
|
:zephyr_file:`boards/arduino/nano_33_iot/arduino_nano_33_iot_defconfig`.
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
The `Arduino store`_ has detailed information about board
|
|
connections. Download the `schematic`_ for more detail.
|
|
|
|
System Clock
|
|
============
|
|
|
|
The SAMD21 MCU is configured to use the 8 MHz internal oscillator
|
|
with the on-chip PLL generating the 48 MHz system clock. The internal
|
|
APB and GCLK unit are set up in the same way as the upstream Arduino
|
|
libraries.
|
|
|
|
Serial Port
|
|
===========
|
|
|
|
The SAMD21 MCU has 6 SERCOM based USARTs. SERCOM5 is available on pins 1 and 2.
|
|
|
|
PWM
|
|
===
|
|
|
|
The SAMD21 MCU has 3 TCC based PWM units with up to 4 outputs each and a period
|
|
of 24 bits or 16 bits. If :code:`CONFIG_PWM_SAM0_TCC` is enabled then LED0 is
|
|
driven by TCC2 instead of by GPIO.
|
|
|
|
SPI Port
|
|
========
|
|
|
|
The SAMD21 MCU has 6 SERCOM based SPIs. SERCOM1 is available on pins 1, 14,
|
|
and 15.
|
|
|
|
USB Device Port
|
|
===============
|
|
|
|
The SAMD21 MCU has a USB device port that can be used to communicate
|
|
with a host PC. See the :ref:`usb-samples` sample applications for
|
|
more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
|
|
serial port that echos characters back to the host PC.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
The Nano 33 IOT ships the BOSSA compatible UF2 bootloader. The
|
|
bootloader can be entered by quickly tapping the reset button twice.
|
|
|
|
Additionally, if :code:`CONFIG_USB_CDC_ACM` is enabled then the bootloader
|
|
will be entered automatically when you run :code:`west flash`.
|
|
|
|
Flashing
|
|
========
|
|
|
|
#. Build the Zephyr kernel and the :ref:`hello_world` sample application:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: arduino_nano_33_iot
|
|
:goals: build
|
|
:compact:
|
|
|
|
#. Connect the Nano 33 IOT to your host computer using USB
|
|
|
|
#. Connect a 3.3 V USB to serial adapter to the board and to the
|
|
host. See the `Serial Port`_ section above for the board's pin
|
|
connections.
|
|
|
|
#. Run your favorite terminal program to listen for output. Under Linux the
|
|
terminal should be :code:`/dev/ttyACM0`. For example:
|
|
|
|
.. code-block:: console
|
|
|
|
$ minicom -D /dev/ttyACM0 -o
|
|
|
|
The -o option tells minicom not to send the modem initialization
|
|
string. Connection should be configured as follows:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
#. Tap the reset button twice quickly to enter bootloader mode
|
|
|
|
#. Flash the image:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: arduino_nano_33_iot
|
|
:goals: flash
|
|
:compact:
|
|
|
|
You should see "Hello World! arduino_nano_33_iot" in your terminal.
|
|
|
|
References
|
|
**********
|
|
|
|
.. target-notes::
|
|
|
|
.. _Arduino Store:
|
|
https://store.arduino.cc/arduino-nano-33-iot
|
|
|
|
.. _schematic:
|
|
https://content.arduino.cc/assets/NANO33IoTV2.0_sch.pdf
|