71 lines
1.7 KiB
YAML
71 lines
1.7 KiB
YAML
# Copyright (c) 2019, Manivannan Sadhasivam
|
|
# Copyright (c) 2020, Grinn
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
include: spi-device.yaml
|
|
|
|
properties:
|
|
reset-gpios:
|
|
type: phandle-array
|
|
required: true
|
|
description: |
|
|
GPIO connected to the modem's RESET/NRESET signal.
|
|
|
|
This signal is open-drain, active-high (SX1272/3) or
|
|
active-low (SX1276/7/8/9) as interpreted by the modem.
|
|
|
|
dio-gpios:
|
|
type: phandle-array
|
|
required: true
|
|
description: |
|
|
Up to six pins that produce service interrupts from the modem.
|
|
|
|
These signals are normally active-high.
|
|
|
|
power-amplifier-output:
|
|
type: string
|
|
required: false
|
|
description: |
|
|
Selects power amplifier output pin. This is required when neither
|
|
'rfo-enable-gpios' nor 'pa-boost-enable-gpios' is specified. In other
|
|
case this property is simply ignored.
|
|
enum:
|
|
- "rfo"
|
|
- "pa-boost"
|
|
|
|
antenna-enable-gpios:
|
|
type: phandle-array
|
|
required: false
|
|
description: |
|
|
Antenna power enable pin.
|
|
|
|
rfi-enable-gpios:
|
|
type: phandle-array
|
|
required: false
|
|
description: |
|
|
RFI antenna input enable pin.
|
|
|
|
rfo-enable-gpios:
|
|
type: phandle-array
|
|
required: false
|
|
description: |
|
|
RFO antenna output enable pin.
|
|
|
|
pa-boost-enable-gpios:
|
|
type: phandle-array
|
|
required: false
|
|
description: |
|
|
PA_BOOST antenna output enable pin.
|
|
|
|
tcxo-power-gpios:
|
|
type: phandle-array
|
|
required: false
|
|
description: |
|
|
TCXO power enable pin.
|
|
|
|
tcxo-power-startup-delay-ms:
|
|
type: int
|
|
required: false
|
|
description: |
|
|
Delay which has to be applied after enabling TCXO power.
|