zephyr/arch/riscv/Kconfig

# Copyright (c) 2016 Jean-Paul Etienne <fractalclone@gmail.com>
# SPDX-License-Identifier: Apache-2.0

menu "RISCV Options"
	depends on RISCV

config ARCH
	string
	default "riscv64" if 64BIT
	default "riscv32"

config FLOAT_HARD
	bool "Hard-float calling convention"
	default y
	depends on FPU
	help
	  This option enables the hard-float calling convention.

config RISCV_GP
	bool "RISC-V global pointer relative addressing"
	default n
	help
	  Use global pointer relative addressing for small globals declared
	  anywhere in the executable. It can benefit performance and reduce
	  the code size.

	  Note: To support this feature, RISC-V SoC needs to initialize
	  global pointer at program start or earlier than any instruction
	  using GP relative addressing.

menu "RISCV Processor Options"

config INCLUDE_RESET_VECTOR
	bool "Include Reset vector"
	help
	  Include the reset vector stub, which initializes the stack and
	  prepares for running C code.

config RISCV_SOC_CONTEXT_SAVE
	bool "SOC-based context saving in IRQ handlers"
	select RISCV_SOC_OFFSETS
	help
	  Enable low-level SOC-specific context management, for SOCs
	  with extra state that must be saved when entering an
	  interrupt/exception, and restored on exit. If unsure, leave
	  this at the default value.

	  Enabling this option requires that the SoC provide a
	  soc_context.h header which defines the following macros:

	  - SOC_ESF_MEMBERS: structure component declarations to
	    allocate space for. The last such declaration should not
	    end in a semicolon, for portability. The generic RISC-V
	    architecture code will allocate space for these members in
	    a "struct soc_esf" type (typedefed to soc_esf_t), which will
	    be available if arch.h is included.

	  - SOC_ESF_INIT: structure contents initializer for struct soc_esf
	    state. The last initialized member should not end in a comma.

	  The generic architecture IRQ wrapper will also call
	  \_\_soc_save_context and \_\_soc_restore_context routines at
	  ISR entry and exit, respectively. These should typically
	  be implemented in assembly. If they were C functions, they
	  would have these signatures:

	  ``void __soc_save_context(soc_esf_t *state);``

	  ``void __soc_restore_context(soc_esf_t *state);``

	  The calls obey standard calling conventions; i.e., the state
	  pointer address is in a0, and ra contains the return address.

config RISCV_SOC_OFFSETS
	bool "SOC-based offsets"
	help
	  Enabling this option requires that the SoC provide a soc_offsets.h
	  header which defines the following macros:

	  - GEN_SOC_OFFSET_SYMS(): a macro which expands to
	    GEN_OFFSET_SYM(soc_esf_t, soc_specific_member) calls
	    to ensure offset macros for SOC_ESF_MEMBERS are defined
	    in offsets.h. The last one should not end in a semicolon.
	    See gen_offset.h for more details.

config RISCV_SOC_INTERRUPT_INIT
	bool "SOC-based interrupt initialization"
	help
	  Enable SOC-based interrupt initialization
	  (call soc_interrupt_init, within _IntLibInit when enabled)

config RISCV_SOC_MCAUSE_EXCEPTION_MASK
	hex
	default 0x7FFFFFFFFFFFFFFF if 64BIT
	default 0x7FFFFFFF
	help
	  Specify the bits to use for exception code in mcause register.

config RISCV_GENERIC_TOOLCHAIN
	bool "Compile using generic riscv32 toolchain"
	default y
	help
	  Compile using generic riscv32 toolchain.
	  Allow SOCs that have custom extended riscv ISA to still
	  compile with generic riscv32 toolchain.

config RISCV_HAS_CPU_IDLE
	bool "Does SOC has CPU IDLE instruction"
	help
	  Does SOC has CPU IDLE instruction

config GEN_ISR_TABLES
	default y

config GEN_IRQ_VECTOR_TABLE
	default n

config NUM_IRQS
	int

config RISCV_PMP
	bool "RISC-V PMP Support"
	select THREAD_STACK_INFO
	select CPU_HAS_MPU
	select ARCH_HAS_USERSPACE
	select ARCH_HAS_STACK_PROTECTION
	select MPU
	select SRAM_REGION_PERMISSIONS
	select ARCH_MEM_DOMAIN_SYNCHRONOUS_API if USERSPACE
	select ARCH_MEM_DOMAIN_DATA if USERSPACE
	select THREAD_LOCAL_STORAGE if USERSPACE
	help
	  MCU implements Physical Memory Protection.

if RISCV_PMP

config PMP_SLOTS
	int "Number of PMP slots"
	default 8
	help
	  This is the number of PMP entries implemented by the hardware.
	  Typical values are 8 or 16.

config PMP_POWER_OF_TWO_ALIGNMENT
	bool "Enforce power-of-two alignment on PMP memory areas"
	depends on USERSPACE
	default y if TEST_USERSPACE
	default y if (PMP_SLOTS = 8)
	select MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
	select GEN_PRIV_STACKS
	help
	  This option reduces the PMP slot usage but increases
	  memory consumption. Useful when enabling userspace mode with
	  many memory domains and/or few PMP slots available.

endif #RISCV_PMP

config PMP_STACK_GUARD
	def_bool y
	depends on HW_STACK_PROTECTION

config PMP_STACK_GUARD_MIN_SIZE
	int "Stack Guard area size"
	depends on PMP_STACK_GUARD
	default 1024 if 64BIT
	default 512
	help
	  The Hardware Stack Protection implements a guard area at the bottom
	  of the stack using the PMP to catch stack overflows by marking that
	  guard area not accessible.

	  This is the size of the guard area. This should be large enough to
	  catch any sudden jump in stack pointer decrement, plus some
	  wiggle room to accommodate the eventual overflow exception
	  stack usage.

endmenu

config MAIN_STACK_SIZE
	default 4096 if 64BIT
	default 2048 if PMP_STACK_GUARD

config TEST_EXTRA_STACK_SIZE
	default 1024

config CMSIS_THREAD_MAX_STACK_SIZE
	default 1024 if 64BIT

config CMSIS_V2_THREAD_MAX_STACK_SIZE
	default 1024 if 64BIT

rsource "Kconfig.isa"
rsource "Kconfig.core"

endmenu