OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/Kconfig.zephyr

838 lines
27 KiB
Plaintext
Raw Blame History

# General configuration options
# Copyright (c) 2014-2015 Wind River Systems, Inc.
# Copyright (c) 2016 Intel Corporation
# SPDX-License-Identifier: Apache-2.0
# Include Kconfig.defconfig files first so that they can override defaults and
# other symbol/choice properties by adding extra symbol/choice definitions.
# After merging all definitions for a symbol/choice, Kconfig picks the first
# property (e.g. the first default) with a satisfied condition.
#
# Shield defaults should have precedence over board defaults, which should have
# precedence over SoC defaults, so include them in that order.
#
# $ARCH and $BOARD_DIR will be glob patterns when building documentation.
# This loads custom shields defconfigs (from BOARD_ROOT)
osource "$(KCONFIG_BINARY_DIR)/Kconfig.shield.defconfig"
# This loads Zephyr base shield defconfigs
source "boards/shields/*/Kconfig.defconfig"
source "$(BOARD_DIR)/Kconfig.defconfig"
# This loads custom SoC root defconfigs
osource "$(KCONFIG_BINARY_DIR)/Kconfig.soc.defconfig"
# This loads Zephyr base SoC root defconfigs
osource "soc/$(ARCH)/*/Kconfig.defconfig"
# This loads the toolchain defconfigs
osource "$(TOOLCHAIN_KCONFIG_DIR)/Kconfig.defconfig"
menu "Modules"
source "modules/Kconfig"
endmenu
source "boards/Kconfig"
source "soc/Kconfig"
source "arch/Kconfig"
source "kernel/Kconfig"
source "dts/Kconfig"
source "drivers/Kconfig"
source "lib/Kconfig"
source "subsys/Kconfig"
osource "$(TOOLCHAIN_KCONFIG_DIR)/Kconfig"
menu "Build and Link Features"
menu "Linker Options"
choice
prompt "Linker Orphan Section Handling"
default LINKER_ORPHAN_SECTION_WARN
config LINKER_ORPHAN_SECTION_PLACE
bool "Place"
help
Linker puts orphan sections in place without warnings
or errors.
config LINKER_ORPHAN_SECTION_WARN
bool "Warn"
help
Linker places the orphan sections in output and issues
warning about those sections.
config LINKER_ORPHAN_SECTION_ERROR
bool "Error"
help
Linker exits with error when an orphan section is found.
endchoice
config HAS_FLASH_LOAD_OFFSET
bool
help
This option is selected by targets having a FLASH_LOAD_OFFSET
and FLASH_LOAD_SIZE.
if HAS_FLASH_LOAD_OFFSET
config USE_DT_CODE_PARTITION
bool "Link application into /chosen/zephyr,code-partition from devicetree"
help
When enabled, the application will be linked into the flash partition
selected by the zephyr,code-partition property in /chosen in devicetree.
When this is disabled, the flash load offset and size can be set manually
below.
# Workaround for not being able to have commas in macro arguments
DT_CHOSEN_Z_CODE_PARTITION := zephyr,code-partition
config FLASH_LOAD_OFFSET
# Only user-configurable when USE_DT_CODE_PARTITION is disabled
hex "Kernel load offset" if !USE_DT_CODE_PARTITION
default $(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_DT_CODE_PARTITION
default 0
help
This option specifies the byte offset from the beginning of flash that
the kernel should be loaded into. Changing this value from zero will
affect the Zephyr image's link, and will decrease the total amount of
flash available for use by application code.
If unsure, leave at the default value 0.
config FLASH_LOAD_SIZE
# Only user-configurable when USE_DT_CODE_PARTITION is disabled
hex "Kernel load size" if !USE_DT_CODE_PARTITION
default $(dt_chosen_reg_size_hex,$(DT_CHOSEN_Z_CODE_PARTITION)) if USE_DT_CODE_PARTITION
default 0
help
If non-zero, this option specifies the size, in bytes, of the flash
area that the Zephyr image will be allowed to occupy. If zero, the
image will be able to occupy from the FLASH_LOAD_OFFSET to the end of
the device.
If unsure, leave at the default value 0.
endif # HAS_FLASH_LOAD_OFFSET
config ROM_START_OFFSET
hex
prompt "ROM start offset" if !BOOTLOADER_MCUBOOT
default 0x200 if BOOTLOADER_MCUBOOT
default 0
help
If the application is built for chain-loading by a bootloader this
variable is required to be set to value that leaves sufficient
space between the beginning of the image and the start of the first
section to store an image header or any other metadata.
In the particular case of the MCUboot bootloader this reserves enough
space to store the image header, which should also meet vector table
alignment requirements on most ARM targets, although some targets
may require smaller or larger values.
config LD_LINKER_SCRIPT_SUPPORTED
bool
default y
choice LINKER_SCRIPT
prompt "Linker script"
default LD_LINKER_TEMPLATE if LD_LINKER_SCRIPT_SUPPORTED
config LD_LINKER_TEMPLATE
bool "LD template"
depends on LD_LINKER_SCRIPT_SUPPORTED
help
Select this option to use the LD linker script templates.
The templates are pre-processed by the C pre-processor to create the
final LD linker script.
config CMAKE_LINKER_GENERATOR
bool "CMake generator"
depends on ARM
help
Select this option to use the Zephyr CMake linker script generator.
The linker configuration is written in CMake and the final linker
script will be generated by the toolchain specific linker generator.
For LD based linkers, this will be the ld generator, for ARMClang /
armlink based linkers it will be the scatter generator.
endchoice
config LLVM_USE_LD
bool "LLVM use ld linker"
depends on "${ZEPHYR_TOOLCHAIN_VARIANT}" = "llvm"
default y
help
Use binutils ld linker instead of LLVM built-in lld linker.
config HAVE_CUSTOM_LINKER_SCRIPT
bool "Custom linker script provided"
help
Set this option if you have a custom linker script which needed to
be define in CUSTOM_LINKER_SCRIPT.
config CUSTOM_LINKER_SCRIPT
string "Path to custom linker script"
depends on HAVE_CUSTOM_LINKER_SCRIPT
help
Path to the linker script to be used instead of the one define by the
board.
The linker script must be based on a version provided by Zephyr since
the kernel can expect a certain layout/certain regions.
This is useful when an application needs to add sections into the
linker script and avoid having to change the script provided by
Zephyr.
config KERNEL_ENTRY
string "Kernel entry symbol"
default "__start"
help
Code entry symbol, to be set at linking phase.
config LINKER_SORT_BY_ALIGNMENT
bool "Sort input sections by alignment"
default y
help
This turns on the linker flag to sort sections by alignment
in decreasing size of symbols. This helps to minimize
padding between symbols.
config SRAM_VECTOR_TABLE
bool "Place the vector table in SRAM instead of flash"
help
The option specifies that the vector table should be placed at the
start of SRAM instead of the start of flash.
config HAS_SRAM_OFFSET
bool
help
This option is selected by targets that require SRAM_OFFSET.
config SRAM_OFFSET
hex "Kernel SRAM offset" if HAS_SRAM_OFFSET
default 0
help
This option specifies the byte offset from the beginning of SRAM
where the kernel begins. Changing this value from zero will affect
the Zephyr image's link, and will decrease the total amount of
SRAM available for use by application code.
If unsure, leave at the default value 0.
menu "Linker Sections"
config LINKER_USE_BOOT_SECTION
bool "Use Boot Linker Section"
help
If enabled, the symbols which are needed for the boot process
will be put into another linker section reserved for these
symbols.
Requires that boot sections exist in the architecture, SoC,
board or custom linker script.
config LINKER_USE_PINNED_SECTION
bool "Use Pinned Linker Section"
help
If enabled, the symbols which need to be pinned in memory
will be put into another linker section reserved for pinned
symbols. During boot, the corresponding memory will be marked
as pinned.
Requires that pinned sections exist in the architecture, SoC,
board or custom linker script.
config LINKER_GENERIC_SECTIONS_PRESENT_AT_BOOT
bool "Generic sections are present at boot" if DEMAND_PAGING && LINKER_USE_PINNED_SECTION
default y
help
When disabled, the linker sections other than the boot and
pinned sections will be marked as not present in the page
tables. This allows kernel to pull in data pages on demand
as required by current execution context when demand paging
is enabled. There is no need to load all code and data into
memory at once.
If unsure, say Y.
endmenu # "Linker Sections"
endmenu
menu "Compiler Options"
config CODING_GUIDELINE_CHECK
bool "Enforce coding guideline rules"
help
Use available compiler flags to check coding guideline rules during
the build.
config NATIVE_APPLICATION
bool "Build as a native host application"
help
Build as a native application that can run on the host and using
resources and libraries provided by the host.
choice COMPILER_OPTIMIZATIONS
prompt "Optimization level"
default NO_OPTIMIZATIONS if COVERAGE
default DEBUG_OPTIMIZATIONS if DEBUG
default SIZE_OPTIMIZATIONS
help
Note that these flags shall only control the compiler
optimization level, and that no extra debug code shall be
conditionally compiled based on them.
config SIZE_OPTIMIZATIONS
bool "Optimize for size"
help
Compiler optimizations will be set to -Os independently of other
options.
config SPEED_OPTIMIZATIONS
bool "Optimize for speed"
help
Compiler optimizations will be set to -O2 independently of other
options.
config DEBUG_OPTIMIZATIONS
bool "Optimize debugging experience"
help
Compiler optimizations will be set to -Og independently of other
options.
config NO_OPTIMIZATIONS
bool "Optimize nothing"
help
Compiler optimizations will be set to -O0 independently of other
options.
endchoice
config COMPILER_COLOR_DIAGNOSTICS
bool "Colored diagnostics"
default y
help
Compiler diagnostic messages are colorized.
config COMPILER_OPT
string "Custom compiler options"
help
This option is a free-form string that is passed to the compiler
when building all parts of a project (i.e. kernel).
The compiler options specified by this string supplement the
predefined set of compiler supplied by the build system,
and can be used to change compiler optimization, warning and error
messages, and so on.
config MISRA_SANE
bool "MISRA standards compliance features"
help
Causes the source code to build in "MISRA" mode, which
disallows some otherwise-permitted features of the C
standard for safety reasons. Specifically variable length
arrays are not permitted (and gcc will enforce this).
endmenu
choice
prompt "Error checking behavior for CHECK macro"
default RUNTIME_ERROR_CHECKS
config ASSERT_ON_ERRORS
bool "Assert on all errors"
help
Assert on errors covered with the CHECK macro.
config NO_RUNTIME_CHECKS
bool "No runtime error checks"
help
Do not do any runtime checks or asserts when using the CHECK macro.
config RUNTIME_ERROR_CHECKS
bool "Runtime error checks"
help
Always perform runtime checks covered with the CHECK macro. This
option is the default and the only option used during testing.
endchoice
menu "Build Options"
config KERNEL_BIN_NAME
string "The kernel binary name"
default "zephyr"
help
This option sets the name of the generated kernel binary.
config OUTPUT_STAT
bool "Create a statistics file"
default y
help
Create a stat file using readelf -e <elf>
config OUTPUT_DISASSEMBLY
bool "Create a disassembly file"
default y
help
Create an .lst file with the assembly listing of the firmware.
config OUTPUT_DISASSEMBLE_ALL
bool "Disassemble all sections with source. Fill zeros."
default n
depends on OUTPUT_DISASSEMBLY
help
The .lst file will contain complete disassembly of the firmware
not just those expected to contain instructions including zeros
config OUTPUT_PRINT_MEMORY_USAGE
bool "Print memory usage to stdout"
default y
help
If the toolchain supports it, this option will pass
--print-memory-region to the linker when it is doing it's first
linker pass. Note that the memory regions are symbolic concepts
defined by the linker scripts and do not necessarily map
directly to the real physical address space. Take also note that
some platforms do two passes of the linker so the results do not
match exactly to the final elf file. See also rom_report,
ram_report and
https://sourceware.org/binutils/docs/ld/MEMORY.html
config CLEANUP_INTERMEDIATE_FILES
bool "Remove all intermediate files"
help
Delete intermediate files to save space and cleanup clutter resulting
from the build process.
config BUILD_NO_GAP_FILL
bool "Don't fill gaps in generated hex/bin/s19 files."
config BUILD_OUTPUT_HEX
bool "Build a binary in HEX format"
help
Build an Intel HEX binary zephyr/zephyr.hex in the build directory.
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
config BUILD_OUTPUT_BIN
bool "Build a binary in BIN format"
default y
help
Build a "raw" binary zephyr/zephyr.bin in the build directory.
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
config BUILD_OUTPUT_EFI
bool "Build as an EFI application"
default n
depends on X86_64
help
Build as an EFI application.
This works by creating a "zephyr.efi" EFI binary containing a zephyr
image extracted from a built zephyr.elf file. EFI applications are
relocatable, and cannot be placed at specific locations in memory.
Instead, the stub code will copy the embedded zephyr sections to the
appropriate locations at startup, clear any zero-filled (BSS, etc...)
areas, then jump into the 64 bit entry point.
config BUILD_OUTPUT_EXE
bool "Build a binary in ELF format with .exe extension"
help
Build an ELF binary that can run in the host system at
zephyr/zephyr.exe in the build directory.
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
config BUILD_OUTPUT_S19
bool "Build a binary in S19 format"
help
Build an S19 binary zephyr/zephyr.s19 in the build directory.
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
config BUILD_OUTPUT_UF2
bool "Build a binary in UF2 format"
depends on BUILD_OUTPUT_BIN
help
Build a UF2 binary zephyr/zephyr.uf2 in the build directory.
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
if BUILD_OUTPUT_UF2
config BUILD_OUTPUT_UF2_FAMILY_ID
string "UF2 device family ID"
default "0x1c5f21b0" if SOC_ESP32
default "0x621e937a" if SOC_NRF52833_QIAA
default "0xada52840" if SOC_NRF52840_QIAA
default "0x4fb2d5bd" if SOC_SERIES_IMX_RT
default "0x2abc77ec" if SOC_SERIES_LPC55XXX
default "0xe48bff56" if SOC_SERIES_RP2XXX
default "0x68ed2b88" if SOC_SERIES_SAMD21
default "0x55114460" if SOC_SERIES_SAMD51
default "0x647824b6" if SOC_SERIES_STM32F0X
default "0x5d1a0a2e" if SOC_SERIES_STM32F2X
default "0x6b846188" if SOC_SERIES_STM32F3X
default "0x53b80f00" if SOC_SERIES_STM32F7X
default "0x300f5633" if SOC_SERIES_STM32G0X
default "0x4c71240a" if SOC_SERIES_STM32G4X
default "0x6db66082" if SOC_SERIES_STM32H7X
default "0x202e3a91" if SOC_SERIES_STM32L0X
default "0x1e1f432d" if SOC_SERIES_STM32L1X
default "0x00ff6919" if SOC_SERIES_STM32L4X
default "0x04240bdf" if SOC_SERIES_STM32L5X
default "0x70d16653" if SOC_SERIES_STM32WBX
default "0x5ee21072" if SOC_STM32F103XE
default "0x57755a57" if SOC_STM32F401XC || SOC_STM32F401XE
default "0x6d0922fa" if SOC_STM32F407XE
default "0x8fb060fe" if SOC_STM32F407XG
help
UF2 bootloaders only accept UF2 files with a matching family ID.
This can be either a hex, e.g. 0x68ed2b88, or well-known family
name string. If the SoC in use is known by UF2, the Family ID will
be pre-filled with the known value.
config BUILD_OUTPUT_UF2_USE_FLASH_BASE
bool
default n
config BUILD_OUTPUT_UF2_USE_FLASH_OFFSET
bool
default n
endif # BUILD_OUTPUT_UF2
config BUILD_OUTPUT_STRIPPED
bool "Build a stripped binary"
help
Build a stripped binary zephyr/zephyr.strip in the build directory.
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
config BUILD_OUTPUT_ADJUST_LMA
string
help
This will adjust the LMA address in the final ELF and hex files with
the value provided.
This will not affect the internal address symbols inside the image but
can be useful when adjusting the LMA address for flash tools or multi
stage loaders where a pre-loader may copy image to a second location
before booting a second core.
The value will be evaluated as a math expression, this means that
following are valid expression
- 1024
- 0x1000
- -0x1000
- 0x20000000 - 0x10000000
Note: negative numbers are valid.
To adjust according to a chosen flash partition one can specify a
default as:
DT_CHOSEN_IMAGE_<name> := <name>,<name>-partition
DT_CHOSEN_Z_FLASH := zephyr,flash
config BUILD_OUTPUT_ADJUST_LMA
default "$(dt_chosen_reg_addr_hex,$(DT_CHOSEN_IMAGE_M4))-\
$(dt_chosen_reg_addr_hex,$(DT_CHOSEN_Z_FLASH))"
config BUILD_OUTPUT_INFO_HEADER
bool "Create a image information header"
help
Create an image information header which will contain image
information from the Zephyr binary.
Example of information contained in the header file:
- Number of segments in the image
- LMA address of each segment
- VMA address of each segment
- Size of each segment
config APPLICATION_DEFINED_SYSCALL
bool "Scan application folder for any syscall definition"
help
Scan additional folders inside application source folder
for application defined syscalls.
config MAKEFILE_EXPORTS
bool "Generate build metadata files named Makefile.exports"
help
Generates a file with build information that can be read by
third party Makefile-based build systems.
config BUILD_OUTPUT_META
bool "Create a build meta file"
help
Create a build meta file in the build directory containing lists of:
- Zephyr: path and revision (if git repo)
- Zephyr modules: name, path, and revision (if git repo)
- West:
- manifest: path and revision
- projects: path and revision
- Workspace:
- dirty: one or more repositories are marked dirty
- extra: extra Zephyr modules are manually included in the build
- off: the SHA of one or more west projects are not what the manifest
defined when `west update` was run the last time (`manifest-rev`).
The off state is only present if a west workspace is found.
File extension is .meta
config BUILD_OUTPUT_META_STATE_PROPAGATE
bool "Propagate module and project state"
depends on BUILD_OUTPUT_META
help
Propagate to state of each module to the Zephyr revision field.
If west is used the state of each west project is also propagated to
the Zephyr revision field.
West manifest repo revision field will also
be marked with the same state as the Zephyr revision.
The final revision will become: <SHA>-<state1>-<state2>-<state3>...
If no states are appended to the SHA it means the build is of a clean
tree.
- dirty: one or more repositories are marked dirty
- extra: extra Zephyr modules are manually included in the build
- off: the SHA of one or more west projects are not what the manifest
defined when `west update` was run the last time (`manifest-rev`).
The off state is only present if a west workspace is found.
endmenu
config EXPERIMENTAL
bool
help
Symbol that must be selected by a feature if it is considered to be
at an experimental implementation stage.
config WARN_EXPERIMENTAL
bool
prompt "Warn on experimental usage"
help
Print a warning when the Kconfig tree is parsed if any experimental
features are enabled.
config ENFORCE_ZEPHYR_STDINT
bool
prompt "Enforce Zephyr convention for stdint"
depends on !ARCH_POSIX
default y
help
This enforces the Zephyr stdint convention where int32_t = int,
int64_t = long long, and intptr_t = long so that short string
format length modifiers can be used universally across ILP32
and LP64 architectures. Sometimes this is not possible e.g. when
linking against a binary-only C++ library whose type mangling
is incompatible with the Zephyr convention, or if the build
environment doesn't allow such enforcement, in which case this
should be turned off with the caveat that argument type validation
on Zephyr code will be skipped.
endmenu
menu "Boot Options"
config IS_BOOTLOADER
bool "Act as a bootloader"
depends on XIP
depends on ARM
help
This option indicates that Zephyr will act as a bootloader to execute
a separate Zephyr image payload.
config BOOTLOADER_SRAM_SIZE
int "SRAM reserved for bootloader"
default 16
depends on !XIP || IS_BOOTLOADER
depends on ARM || XTENSA
help
This option specifies the amount of SRAM (measure in kB) reserved for
a bootloader image, when either:
- the Zephyr image itself is to act as the bootloader, or
- Zephyr is a !XIP image, which implicitly assumes existence of a
bootloader that loads the Zephyr !XIP image onto SRAM.
config MCUBOOT
bool
help
Hidden option used to indicate that the current image is MCUBoot
config BOOTLOADER_MCUBOOT
bool "MCUboot bootloader support"
select USE_DT_CODE_PARTITION
imply INIT_ARCH_HW_AT_BOOT if ARCH_SUPPORTS_ARCH_HW_INIT
depends on !MCUBOOT
help
This option signifies that the target uses MCUboot as a bootloader,
or in other words that the image is to be chain-loaded by MCUboot.
This sets several required build system and Device Tree options in
order for the image generated to be bootable using the MCUboot open
source bootloader. Currently this includes:
* Setting ROM_START_OFFSET to a default value that allows space
for the MCUboot image header
* Activating SW_VECTOR_RELAY_CLIENT on Cortex-M0
(or Armv8-M baseline) targets with no built-in vector relocation
mechanisms
By default, this option instructs Zephyr to initialize the core
architecture HW registers during boot, when this is supported by
the application. This removes the need by MCUboot to reset
the core registers' state itself.
if BOOTLOADER_MCUBOOT
config MCUBOOT_SIGNATURE_KEY_FILE
string "Path to the mcuboot signing key file"
default ""
depends on !MCUBOOT_GENERATE_UNSIGNED_IMAGE
help
The file contains a key pair whose public half is verified
by your target's MCUboot image. The file is in PEM format.
If set to a non-empty value, the build system tries to
sign the final binaries using a 'west sign -t imgtool' command.
The signed binaries are placed in the build directory
at zephyr/zephyr.signed.bin and zephyr/zephyr.signed.hex.
The file names can be customized with CONFIG_KERNEL_BIN_NAME.
The existence of bin and hex files depends on CONFIG_BUILD_OUTPUT_BIN
and CONFIG_BUILD_OUTPUT_HEX.
This option should contain a path to the same file as the
BOOT_SIGNATURE_KEY_FILE option in your MCUboot .config. The path
may be absolute or relative to the west workspace topdir. (The MCUboot
config option is used for the MCUboot bootloader image; this option is
for your application which is to be loaded by MCUboot. The MCUboot
config option can be a relative path from the MCUboot repository
root.)
If left empty, you must sign the Zephyr binaries manually.
config MCUBOOT_ENCRYPTION_KEY_FILE
string "Path to the mcuboot encryption key file"
default ""
depends on MCUBOOT_SIGNATURE_KEY_FILE != ""
help
The file contains the public key that is used to encrypt the
ephemeral key that encrypts the image. The corresponding
private key is hard coded in the MCUboot source code and is
used to decrypt the ephemeral key that is embedded in the
image. The file is in PEM format.
If set to a non-empty value, the build system tries to
sign and encrypt the final binaries using a 'west sign -t imgtool'
command. The binaries are placed in the build directory at
zephyr/zephyr.signed.encrypted.bin and
zephyr/zephyr.signed.encrypted.hex.
The file names can be customized with CONFIG_KERNEL_BIN_NAME.
The existence of bin and hex files depends on CONFIG_BUILD_OUTPUT_BIN
and CONFIG_BUILD_OUTPUT_HEX.
This option should either be an absolute path or a path relative to
the west workspace topdir.
Example: './bootloader/mcuboot/enc-rsa2048-pub.pem'
If left empty, you must encrypt the Zephyr binaries manually.
config MCUBOOT_EXTRA_IMGTOOL_ARGS
string "Extra arguments to pass to imgtool"
default ""
help
If CONFIG_MCUBOOT_SIGNATURE_KEY_FILE is a non-empty string,
you can use this option to pass extra options to imgtool.
For example, you could set this to "--version 1.2".
config MCUBOOT_GENERATE_UNSIGNED_IMAGE
bool "Generate unsigned binary image bootable with MCUboot"
help
Enabling this configuration allows automatic unsigned binary image
generation when MCUboot signing key is not provided,
i.e., MCUBOOT_SIGNATURE_KEY_FILE is left empty.
config MCUBOOT_GENERATE_CONFIRMED_IMAGE
bool "Also generate a padded, confirmed image"
help
The signed, padded, and confirmed binaries are placed in the build
directory at zephyr/zephyr.signed.confirmed.bin and
zephyr/zephyr.signed.confirmed.hex.
The file names can be customized with CONFIG_KERNEL_BIN_NAME.
The existence of bin and hex files depends on CONFIG_BUILD_OUTPUT_BIN
and CONFIG_BUILD_OUTPUT_HEX.
endif # BOOTLOADER_MCUBOOT
config BOOTLOADER_ESP_IDF
bool "ESP-IDF bootloader support"
depends on (SOC_ESP32 || SOC_ESP32S2 || SOC_ESP32C3) && !BOOTLOADER_MCUBOOT
default y
help
This option will trigger the compilation of the ESP-IDF bootloader
inside the build folder.
At flash time, the bootloader will be flashed with the zephyr image
config BOOTLOADER_BOSSA
bool "BOSSA bootloader support"
select USE_DT_CODE_PARTITION
help
Signifies that the target uses a BOSSA compatible bootloader. If CDC
ACM USB support is also enabled then the board will reboot into the
bootloader automatically when bossac is run.
config BOOTLOADER_BOSSA_DEVICE_NAME
string "BOSSA CDC ACM device name"
depends on BOOTLOADER_BOSSA && CDC_ACM_DTE_RATE_CALLBACK_SUPPORT
default "CDC_ACM_0"
help
Sets the CDC ACM port to watch for reboot commands.
choice
prompt "BOSSA bootloader variant"
depends on BOOTLOADER_BOSSA
config BOOTLOADER_BOSSA_LEGACY
bool "Legacy"
help
Select the Legacy variant of the BOSSA bootloader. This is defined
for compatibility mode only. The recommendation is use newer
versions like Arduino or Adafruit UF2.
config BOOTLOADER_BOSSA_ARDUINO
bool "Arduino"
help
Select the Arduino variant of the BOSSA bootloader. Uses 0x07738135
as the magic value to enter the bootloader.
config BOOTLOADER_BOSSA_ADAFRUIT_UF2
bool "Adafruit UF2"
help
Select the Adafruit UF2 variant of the BOSSA bootloader. Uses
0xf01669ef as the magic value to enter the bootloader.
endchoice
endmenu
menu "Compatibility"
config COMPAT_INCLUDES
bool "Suppress warnings when using header shims"
default y
help
Suppress any warnings from the pre-processor when including
deprecated header files.
endmenu
config LEGACY_INCLUDE_PATH
bool "Allow for the legacy include paths (without the zephyr/ prefix)"
default y
help
Allow applications and libraries to use the Zephyr legacy include
path which does not use the zephyr/ prefix. For example, the
preferred way to include a Zephyr header is to use <zephyr/kernel.h>,
but enabling CONFIG_LEGACY_INCLUDE_PATH will allow developers to
use <kernel.h> instead. This (without the zephyr/ prefix) is
deprecated and should be avoided. Eventually, it will not be
supported.
Reference in New Issue View Git Blame Copy Permalink