52 lines
1.2 KiB
ReStructuredText
52 lines
1.2 KiB
ReStructuredText
.. _servo-motor-sample:
|
|
|
|
PWM: Servo motor
|
|
################
|
|
|
|
Overview
|
|
********
|
|
|
|
This is a sample app which drives a servo motor using
|
|
PWM.
|
|
|
|
This app is targeted for servo motor ROB-09065. With the
|
|
PWM control signal, the servo motor can rotate to any
|
|
angle between 0 and 180 degrees. The corresponding PWM
|
|
pulse width is between 700 micro seconds and 2300 micro
|
|
seconds. The motor is programmed to rotate back and forth
|
|
in the 180 degree range.
|
|
|
|
Since different servo motors may require different PWM
|
|
pulse width, you may need to modify the pulse width in
|
|
the app if you are using a different servo motor.
|
|
|
|
Wiring
|
|
******
|
|
|
|
BBC micro:bit
|
|
=============
|
|
|
|
You will need to connect the motor's red wire to external 5V, the
|
|
black wire to ground and the white wire to pad 0 on the edge
|
|
connector.
|
|
|
|
Arduino 101 and Quark D2000 CRB
|
|
===============================
|
|
|
|
You will need to connect the motor's red wire to 5V,
|
|
the black wire to ground and the white wire to PWM 0 via
|
|
the shield.
|
|
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
This sample can be built for multiple boards, in this example we will build it
|
|
for the arduino_101 board:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/basic/servo_motor
|
|
:board: bbc_microbit
|
|
:goals: build flash
|
|
:compact:
|